数据的VV&C研究

数据的可信性是建模与仿真领域中一个重要的问题。该文首先介绍了数据校核、验证与证明 (VV&C)的基本概念。然后确定了数据VV&C评估的主要策略 :过程模型以及支持数据质量的元数据模板等几方面内容。接着对数据的VV&C和建模与仿真的VV&A的关系作了简要比较。最后举出了一个综合环境评估和检查工具的例子。     

NUMERICAL ANALYSIS OF THE EFFECTS OF LOCAL HYDRODYNAMICS ON MASS TRANSFER IN HETEROGENEOUS POROUS MEDIA

Many engineering problems require the estimation of mass transfer coefficients in porous materials. In heterogeneous materials or in cases where mass transfer sites are not spatially uniform, empirical equations for mass transfer coefficients vary widely, and the origin of these differences is not well understood. In this article, we use a stochastic algorithm to model mass transfer from single particles in a two-dimensional heterogeneous packed bed. The computed mass transfer coefficients are used to generate a distribution of local Peclet numbers in the bed. Detailed hydrodynamics are then used to interpret variations in the local Peclet number. The results show clear relationships between pore structure, streamline patterns, and mass transfer rates.     

用模糊综合评判法评估钢制储罐的寿命

针对影响钢制储罐寿命的因素具有复杂性、非确定性以及时变性的特点,提出了用动态二级模糊综合评判的方法对其寿命进行评估,建立了评估的数学模型和评估流程。在对某石油库油罐的寿命分析中,考虑到保留所有评判因素的影响,采用了乘、加型模糊算子,并用层次分析法来确定评价指标权重。计算结果表明,该方法能够解决储罐寿命评估中的一些复杂因素的处理问题,具有一定的实际工程意义。     

辐射剂量对环氧树脂电子束固化行为的影响

分析了电子束剂量对环氧树脂体系辐射固化行为的影响规律。研究结果表明，电子束辐射过程中，温度由树脂辐射体系表面向内部逐渐降低，随着辐射剂量提高，树脂体系温度上升，辐射表面与内部的温度梯度加大，高辐射剂量下的温度变化缓慢。树脂辐射固化层厚度以及在相同厚度的固化程度均随辐射剂量增加，但增幅逐渐变小，树脂辐射固化度沿固化深度会加速下降。     

硫酸/盐酸比例和Al~(3+)含量对铝箔隧道孔生长的影响

研究了硫酸/盐酸比例、温度和Al3+含量对高纯铝箔隧道孔生长的影响,发现随着硫酸浓度增加,温度对隧道孔极限长度和孔径的影响减小,在本文条件下隧道孔生长的临界温度最低可降低到35℃。在电解液中一定含量的Al3+可以避免铝箔表面形成大孔,从而改善隧道孔分布均匀性。     

入炉煤分炉计量系统的应用探讨

介绍了江西贵溪发电厂的入炉煤分炉计量系统在节能方面开展的一些应用情况。     

4，4＇－二苯醚二甲酸改性PET的合成与表征

４，４＇－二苯醚二甲酸（ＯＢＢＡ）是一种重要的液晶聚合物单体。以此作为改性组分，合成了一系列ＰＥＴ共聚酯，并用１Ｈ－ＮＭＲ、ＦＴ－ＩＲ、ＧＰＣ、二甘醇和端羧基测定等方法进行了表征，同时对改性单体的转化率和合成共聚酯的反应速率进行了测定，结果表明，所选择的合成方法可以获得较高的转化率；反应速率则随ＯＢＢＡ的增加而增大。     

光催化氧化后四环素的分解率与COD去除率之间关系的探讨

以粉状无机半导体（ＺｎＯ）为催化剂，探讨了水溶液中四环素经光催化氧化分解率和ＣＯＤ去除率之间的关系。实验表明，在本实验中四环素的分解率和ＣＯＤ去除率之间有较好的正相关性。当反庆系统中有足量的活性催化剂和足够的光照时间时，绝大部分四环素将被较彻底地氧化分解成ＣＯ２，这不仅有助于光催化反应机理的研究，助于今后在环保中的实际应用。     

Hydrogen Reduction and Microstructural Changes of ISF Sinter

The reduction rate and microstructural changes of imperial smelting furnace (ISF) sinter have been investigated by means of thermogravimetric analysis, X-ray difFraction (XRD), scanning electron microscope (SEM ), energy dispersive analysis of X-ray (EDAX) and optical microscope.It is demonstrated that the overall reaction rate of the reduction is influenced by temperature and hydrogen partial pressure in H2 /N2 gas mixtures. There are two distinct zones observed in the partially reduced sinter. The reduction of zincite proceeds predominantly in a narrow range between the two zones, while the reduction of tead oxide and silicate takes place throughout the sinter. The differences between zincite and lead oxide or silicate in reducibility are analysed by thermodynamlcs. The phase transformations and microstructural changes occurring during the reduction process are discussed