Characterizing 3D vegetation structure from space: Mission requirements

Human and natural forces are rapidly modifying the global distribution and structure of terrestrial ecosystems on which all of life depends, altering the global carbon cycle, affecting our climate now and for the foreseeable future, causing steep reductions in species diversity, and endangering Earth's sustainability.To understand changes and trends in terrestrial ecosystems and their functioning as carbon sources and sinks, and to characterize the impact of their changes on climate, habitat and biodiversity, new space assets are urgently needed to produce high spatial resolution global maps of the three-dimensional (3D) structure of vegetation, its biomass above ground, the carbon stored within and the implications for atmospheric green house gas concentrations and climate. These needs were articulated in a 2007 National Research Council (NRC) report (NRC, 2007) recommending a new satellite mission, DESDynI, carrying an L-band Polarized Synthetic Aperture Radar (Pol-SAR) and a multi-beam lidar (Light RAnging And Detection) operating at 1064 nm. The objectives of this paper are to articulate the importance of these new, multi-year, 3D vegetation structure and biomass measurements, to briefly review the feasibility of radar and lidar remote sensing technology to meet these requirements, to define the data products and measurement requirements, and to consider implications of mission durations. The paper addresses these objectives by synthesizing research results and other input from a broad community of terrestrial ecology, carbon cycle, and remote sensing scientists and working groups. We conclude that:

(1)

Current global biomass and 3-D vegetation structure information is unsuitable for both science and management and policy. The only existing global datasets of biomass are approximations based on combining land cover type and representative carbon values, instead of measurements of actual biomass. Current measurement attempts based on radar and multispectral data have low explanatory power outside low biomass areas. There is no current capability for repeatable disturbance and regrowth estimates.

(2)

The science and policy needs for information on vegetation 3D structure can be successfully addressed by a mission capable of producing (i) a first global inventory of forest biomass with a spatial resolution 1 km or finer and unprecedented accuracy (ii) annual global disturbance maps at a spatial resolution of 1 ha with subsequent biomass accumulation rates at resolutions of 1 km or finer, and (iii) transects of vertical and horizontal forest structure with 30 m along-transect measurements globally at 25 m spatial resolution, essential for habitat characterization.

We also show from the literature that lidar profile samples together with wall-to-wall L-band quad-pol-SAR imagery and ecosystem dynamics models can work together to satisfy these vegetation 3D structure and biomass measurement requirements. Finally we argue that the technology readiness levels of combined pol-SAR and lidar instruments are adequate for space flight. Remaining to be worked out, are the particulars of a lidar/pol-SAR mission design that is feasible and at a minimum satisfies the information and measurement requirement articulated herein.     

Bovine muscle shortening and protein degradation after electrical stimulation, excision and chilling

Electrical stimulation-dependent improvement in beef tenderness resulted from mechanisms other than avoidance of cold shortening in excised muscle chilled at a normal rate (10°C at 10h post-stimulation). At normal chilling rate, electrical stimulation enhanced degradation of the myofibrillar proteins, alpha actinin and troponin-T, and increased the amount of a 30 000 dalton protein, as assessed by gel electrophoresis, whereas sarcomere lengths were not different from unstimulated muscle. Under slightly accelerated chilling conditions (10°C at 5 h post stimulation), electrical stimulation prevented cold shortening but the meat was more tender than, and had the same sarcomere length as, unstimulated muscle chilled to 10°C in 10 h. Electrical stimulation did not improve the tenderness of beef chilled at a rapid rate (10°C at 2 h post stimulation), nor did it prevent cold shortening when muscles were chilled rapidly.     

Transformation calibration of a camera mounted on a robot

The paper describes the accurate calibration of the camera transformation for a vision system consisting of a camera mounted on a robot. The calibration includes an analysis of the linearity of the camera. A knowledge of the camera transformation allows the three-dimensional position of the object points to be determined using triangulation.     

Determination of Retained B2O3 Content in ZrB2‐30 vol% SiC Oxide Scales

The composition of the borosilicate glass layer formed during oxidation of ZrB₂‐30 vol% SiC was determined to elucidate the extent of B₂O₃ retention in the oxide during high‐temperature oxidation. Oxidation was conducted in stagnant air at 1300°C, 1400°C, and 1500°C for times between 100 and 221 min. Specimens were characterized using mass change and scanning electron microscopy. After oxidation, the borosilicate glass layer was dissolved from the specimens sequentially with deionized H₂O and HF acid, to analyze the glass composition using inductively coupled plasma optical emission spectrometry. It was found that the average B₂O₃ content in the glass scale ranged from 23 to 47 mol%. Retained B₂O₃ content in the bulk of the glass decreased with increasing temperature, confirming increased volatility with temperature. Boron depth profiles were also obtained in the near surface region using X‐ray photoelectron spectroscopy and energy dispersive spectroscopy. The measured B concentrations were used to estimate the B₂O₃ concentration profile and B diffusion coefficients in the borosilicate glass. Implications for the ZrB₂‐SiC oxidation process are discussed.     

Divergent Synthesis of Novel Cylindrocyclophanes that Inhibit Methicillin-Resistant Staphylococcus aureus (MRSA)

The cylindrocyclophanes are a family of macrocyclic natural products reported to exhibit antibacterial activity. Little is known about the structural basis of this activity due to the challenges associated with their synthesis or isolation. We hypothesised that structural modification of the cylindrocyclophane scaffold could streamline their synthesis without significant loss of activity. Herein, we report a divergent synthesis of the cylindrocyclophane core enabling access to symmetrical macrocycles by means of a catalytic, domino cross-metathesis-ring-closing metathesis cascade, followed by late-stage diversification. Phenotypic screening identified several novel inhibitors of methicillin-resistant Staphylococcus aureus. The most potent inhibitor has a unique tetrabrominated [7,7]paracyclophane core with no known counterpart in nature. Together these illustrate the potential of divergent synthesis using catalysis and unbiased screening methods in modern antibacterial discovery.     

Systematic Control of the Orientation of Organic Phosphorescent Pt Complexes in Thin Films for Increased Optical Outcoupling

Orienting light‐emitting molecules relative to the substrate is an effective method to enhance the optical outcoupling of organic light‐emitting devices. Platinum(II) phosphorescent complexes enable facile control of the molecular alignment due to their planar structures. Here, the orientation of Pt(II) complexes during the growth of emissive layers is controlled by two different methods: modifying the molecular structure and using structural templating. Molecules whose structures are modified by adjusting the diketonate ligand of the Pt complex, dibenzo‐(f,h)quinoxaline Pt dipivaloylmethane, (dbx)Pt(dpm), show an ≈20% increased fraction of horizontally aligned transition dipole moments compared to (dbx)Pt(dpm) doped into a 4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl, CBP, host. Alternatively, a template composed of highly ordered 3,4,9,10‐perylenetetracarboxylic dianhydride monolayers is predeposited to drive the alignment of a subsequently deposited emissive layer comprising (2,3,7,8,12,13,17,18‐octaethyl)‐21H,23H‐porphyrinplatinum(II) doped into triindolotriazine. This results in a 60% increase in horizontally aligned transition dipole moments compared to the film deposited in the absence of the template. The findings provide a systematic route for controlling molecular alignment during layer growth, and ultimately to increase the optical outcoupling in organic light‐emitting diodes.     

Introduction to the special section on evidence-based psychological treatments for older adults.

Psychology has a strong tradition as a science-based discipline. This tradition has also been strong in the subfields of geropsychology and clinical psychology. The convergence of these traditions leads to an expectation that mental health and aging practices will be theoretically sound and empirically tested. This Psychology and Aging Special Section on Evidence-Based Psychological Treatments for Older Adults presents findings which demonstrate that there are a number of evidence-based treatments that can contribute to exemplary care of older adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of immunosuppression and splenectomy in transplantation sarcomas in mice

After spontaneous regression of transplanted tumours, marked reduction in number of tumours was found when challenged with isogenic tumour cells. The ALS abrogates this effect. Tumour removal by surgical excision of limb and subsequent time scheduled challenge by tumour cells maximally suppress on the 10th day and continues up to the 42nd day the tumorogenic effect. Splenectomy has no effect if done before a day or 3 days after challenge but marked decrease in tumour development was seen when challenged on the 8th day after splenectomy. Amputation and splenectomy together potentiates tumour formation. Only in tumour extrication, does resistance develop up to the 42nd day from surgery. Challenging at a different site in mice with tumours, resulted in prolongation of the intervals of tumour formation. Challenge after surgical removal of tumour after a time lapse, results in marked reduction in number and size of tumours. Surgical tumour extrication after splenectomy and subsequent challenge on 11th day inhibited tumour formation. Whereas splenectomized tumour bearing mice when challenged at a heterosite did not develop resistance.     

Multiresolution free-form deformation with subdivision surface of arbitrary topology

A new free-from deformation method is presented in this paper. Object deformation is controlled by a mesh of arbitrary topology, namely a control mesh. The subdivision surface determined by the control mesh spans an intermediate deformation space. The object is embedded into the space by the nearest point rule. When the shape of the control mesh is changed, the object embedded in the intermediate deformation space will be deformed accordingly. Since the subdivision surface has a multiresolution property, the proposed deformation method naturally has a multiresolution property. A technique for generating control meshes is also introduced in the paper. Compared with previous deformation methods with arbitrary topology control tools, the proposed method has the advantages of flexible control and computational efficiency.