Signaling and Control Procedures Using Generalized MPLS Protocol for IP over an Optical Network

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP‐centric signaling and control architecture based on the generalized multi‐protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross‐connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS‐based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user‐network interface and network‐network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to GMPLS signaling.     

A Liquid Metal Based Multimodal Sensor and Haptic Feedback Device for Thermal and Tactile Sensation Generation in Virtual Reality

Virtual reality (VR) has been widely used for training, gaming, and entertainment, and the value of VR is continually increasing as a contact-free technology. For an immersive VR experience, measuring finger movements and providing appropriate feedback to the hand are as important as visual information, given the necessity of the hands for activities in daily life. Thus, a hand-worn VR device with motion sensors and haptic feedback is desirable. In this paper, a multimodal sensing and feedback glove is developed with soft, stretchable, lightweight, and compact sensor and heater sheets manufactured by direct ink writing (DIW) of liquid metal, eutectic gallium-indium (eGaIn). In the sensor sheet, ten sensors and three vibrators are embedded to measure finger movements and provide vibro-haptic feedback. The other heater sheet provides thermo-haptic sensation in accurate and rapid manner via model-based feedback control even under stretched conditions. The multimodal sensing and feedback glove allows users to feel the contact status and discriminate materials with different temperature. Performance of the proposed multimodal glove is verified under VR environments including touching and pushing two blocks of different materials and grabbing a heated metal ball submerged in hot water.     

Variable length signal detection framework for cognitive radio systems

The cognitive radio (CR) system opportunistically utilizes the frequency bands temporally unoccupied by the primary user. In the CR system, the energy or cyclostationary detector is used to detect the primary user signal. For protecting the primary user tightly, the signal detection time can be very long, which leads to inefficiency in the CR system. Thus, we propose a novel signal detector that greatly reduces the average detection time. The proposed detector periodically decides whether it terminates the detection process or receives more input signal for more information. Therefore, the proposed detector has variable detection time. We will call the proposed detector the variable length signal detector (VLSD). The VLSD is designed by using a partially observable Markov decision process framework for optimal performance. We present the numerical results showing that the VLSD requires much smaller average detection time compared with the traditional fixed length signal detector to achieve a given detection error probability. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of large-signal dynamic characteristics of 10-Gb/s tunable distributed Bragg reflector lasers integrated with electroabsorption modulator and semiconductor optical amplifier based on the time-dependent transfer matrix method

We investigate large-signal dynamic characteristics of tunable distributed Bragg reflector (DBR) lasers with different structures. Because of high chirp and complex structures of tunable DBR lasers, it is difficult to accurately analyze large signal chirp and output pulse shapes with analytical models. Therefore, we apply a numerical model based on the time-dependent transfer matrix method to tunable DBR lasers integrated with electroabsorption modulator (EAM) and semiconductor optical amplifier (SOA). Using this model, we find a suitable /spl alpha/-parameter range in the Bragg grating section (/spl alpha//sub Bragg/-parameter) that produces the tolerable wavelength chirp while maintaining a proper tuning range. To employ the tunable lasers in wavelength division multiplexed networks and improve flexibility of the networks, the tunable lasers should have high output power and low wavelength chirp. According to our simulation results, the EAM section had better be located in between SOA and DBR laser sections to obtain high output power and low wavelength chirp.     

Experimental demonstration of enhancing pump absorption rate in cladding-pumped ytterbium-doped fiber lasers using pump-coupling long-period fiber gratings

A long-period fiber grating (LPFG) was inscribed in a single-mode fiber and was spliced with a ytterbium (Yb)-doped double-clad fiber in order to couple pump radiation of the inner cladding into the core in a cladding-pumped fiber laser. The use of an LPFG permits a partial core-pumping scheme in a cladding-pumping fiber laser because a portion of the pump radiation can be coupled to the core by LPFG. The enhancement of the pump absorption of a Yb-doped cladding-pumped fiber laser as the result of pump coupling by LPFG was 35%, and the maximal output power increased by up to 55% when a 20-W pump source is used.     

A 20-GHz phase-locked loop for 40-gb/s serializing transmitter in 0.13-/spl mu/m CMOS

A 20-GHz phase-locked loop with 4.9 ps/sub pp//0.65 ps/sub rms/ jitter and -113.5 dBc/Hz phase noise at 10-MHz offset is presented. A half-duty sampled-feedforward loop filter that simply replaces the resistor with a switch and an inverter suppresses the reference spur down to -44.0 dBc. A design iteration procedure is outlined that minimizes the phase noise of a negative-g/sub m/ oscillator with a coupled microstrip resonator. Static frequency dividers made of pulsed latches operate faster than those made of flip-flops and achieve near 2:1 frequency range. The phase-locked loop fabricated in a 0.13-/spl mu/m CMOS operates from 17.6 to 19.4GHz and dissipates 480mW.     

High average power, high repetition rate, picosecond pulsed fiber master oscillator power amplifier source seeded by a gain-switched laser diode at 1060 nm

We demonstrate a pulsed ytterbium-doped fiber master-oscillator power amplifier source at 1060 nm producing over 300 W of average power in 20-ps pulses at 1-GHz repetition rate. The pulses generated by a gain-switched diode were compressed by a chirped fiber Bragg grating and amplified without any distortion with excellent spectral quality. This fiber master oscillator power amplifier system offers versatility and potential for further power scaling.     

A 9‐Bit 80‐MS/s CMOS Pipelined Folding A/D Converter with an Offset Canceling Technique

A 9‐bit 80‐MS/s CMOS pipelined folding analog‐to‐digital converter employing offset‐canceled preamplifiers and a subranging scheme is proposed to extend the resolution of a folding architecture. A fully differential dc‐decoupled structure achieves high linearity in circuit design. The measured differential nonlinearity and integral nonlinearity of the prototype are ×0.6 LSB and ×1.6 LSB, respectively.     

Computation sharing programmable FIR filter for low-power and high-performance applications

This paper presents a programmable digital finite-impulse response (FIR) filter for high-performance and low-power applications. The architecture is based on a computation sharing multiplier (CSHM) which specifically targets computation re-use in vector-scalar products and can be effectively used in the low-complexity programmable FIR filter design. Efficient circuit-level techniques, namely a new carry-select adder and conditional capture flip-flop (CCFF), are also used to further improve power and performance. A 10-tap programmable FIR filter was implemented and fabricated in CMOS 0.25-/spl mu/m technology based on the proposed architectural and circuit-level techniques. The chip's core contains approximately 130 K transistors and occupies 9.93 mm/sup 2/ area.     

A 980-nm Yb-doped fiber MOPA source and its frequency doubling

A continuous-wave (CW) master oscillator-power amplifier (MOPA) fiber source, tunable around 978 nm, was frequency-doubled to 488.7 nm. Both the laser and the amplifier were made with cladding-pumped jacketed air-clad Yb-doped fibers. The MOPA generated up to 2.7 W of power in an output beam with an M/sup 2/ value of 1.8. This was frequency-doubled in a periodically poled potassium titanyl phosphate crystal at room temperature, in a single-pass configuration. The generated blue light had a CW power of 18.1 mW, a nearly Gaussian spatial intensity profile, and an M/sup 2/ value of 1.7.