Deep-submicrometer MOS device fabrication using aphotoresist-ashing technique

A photoresist-ashing process has been developed which, when used in conjunction with conventional g-line optical lithography, permits the controlled definition of deep-submicrometer features. The ultrafine lines were obtained by calibrated ashing of the lithographically defined features in oxygen plasma. The technique has been successfully used to fabricate MOSFETs with effective channel length as small as 0.15 μm that show excellent characteristics. An NMOS ring oscillator with 0.2-μm devices has been fabricated with a room-temperature propagation delay of 22 ps/stage. Studies indicate that the thinning is both reproducible and uniform so that it should be usable in circuit as well as device fabrication. Since most polymer-based resist materials are etchable with an oxygen plasma, the basic technique could be extended to supplement other lithographic processes, including e-beam and X-ray processes, for fabricating both silicon and nonsilicon devices and circuits     

Fatigue behavior of niobium-hydrogen alloys

The effects of hydrogen on room temperature fatigue behavior of niobium were investi-gated under both high frequency stress control and low frequency strain control condi-tions, in air. Hydrogen markedly improved the fatigue life in high frequency tests, while low frequency tests resulted in decreased fatigue life with increasing hydrogen content. Notches in hydrogen-charged alloys reduced high cycle life significantly but had little ef-fect on low cycle tests. Fracture surfaces of annealed niobium mainly exhibited striations, with numerous cracks originating at troughs of striated bands in both stress and strain control tests. The fracture mode for alloys with hydrogen in solution was mixed, with striations interspersed with cleavage facets at high frequencies but generally cleavage steps at low frequencies. For the hydrided alloys, distinctive steps of mixed ductile-brit-tle appearance were revealed under high frequency conditions, but large cleavage facets only were observed for low frequency tests. The results are discussed in terms of the effects of hydrogen on the cyclic strain hardening rate, as well as on fatigue strength and ductility of niobium.     

Linkage analysis of infantile pyloric stenosis and markers from chromosome 9q11-q33: no evidence for a major gene in this candidate region

In order to investigate useful indicators of lead contamination, 108 Japanese Black calves from a lead-contaminated farm were used. The lead concentrations in blood (Ph-B), delta-aminolevulinic acid dehydratase (ALA-D) activities, and free erythrocyte protoporphyrin (FEP) concentrations were examined. A significant negative correlation was obtained between Pb-B concentrations and ALA-D activities (r = -0.621, p < 0.01). A significant positive correlation was obtained between Ph-B concentrations and FEP concentrations (r = 0.850, p < 0.01). The calves were divided by Pb-B concentrations (micrograms/100 ml) into 5 groups (A = < or = 30, B = 31 approximately 90, C = 91 approximately 150, D = 151 approximately 210, E = > or = 211) to observe the relation of ALA-D activities, FEP concentrations and ALA-D activities in group B (r = -0.706, p < 0.05). A significant positive correlation was obtained between Pb-B concentrations and FEP concentrations in groups A, B and D (A = r = 0.496, p < 0.01; B = r = 0.686, p < 0.01; D = r = 0.529, p < 0.05). These results indicate that FEP concentrations were good indicators of lead contamination.     

Effect of frusemide on cough responses to chloride-deficient solution in normal and mild asthmatic subjects

We studied the tussive effects of a chloride-deficient solution (1.26% sodium bicarbonate). Nine normal volunteers and 10 mild asthmatic subjects were studied. In two double-blind, placebo-controlled, cross-over studies, we assessed the profile of any inhibitory effects that inhaled frusemide had over these responses. Baseline cough challenge was followed by inhalation of either frusemide (40 mg), or 0.15 M NaCl control. Cough was then induced at 0.5, 2, 4 and 6 h after treatment. Forced expiratory volume in one second (FEV1) was measured before and after each challenge. Changes from the baseline cough response due to drug or control were compared nonparametrically at each time point. There was no difference in the sensitivity of normal and asthmatic subjects to the cough challenge (median cough response 15 and 14.5 on control day, 12 and 15 on frusemide day). Frusemide caused sustained inhibition of the cough response in normal subjects (p < 0.05 at 2 h, p < 0.01 at 4 h), but had only a small, nonsignificant effect in asthmatic subjects at 30 min. Falls in FEV1 of asthmatic subjects due to the chloride-deficient solution were not significant, and did not correlate with number of coughs. We conclude that mild asthmatic subjects are less sensitive than normal subjects to the influence of frusemide against low chloride challenge. This observation is not explained by bronchoconstrictor effects of the cough challenge in asthmatic subjects.     

Continuous variable structure controller for BLDDSM positioncontrol with prescribed tracking performance

The continuous, accurate, and robust sliding mode tracking controller based on a disturbance observer for a brushless direct drive servo motor (BLDDSM) is presented. Although the conventional sliding mode control (SMC) or variable structure control (VSC) can give the desired tracking performance, there exists an inevitable chattering problem in control which is undesirable for a direct drive system. With the proposed algorithm, not only are the chattering problems removed, but also the prescribed tracking performance can be obtained by using the efficient compensation of the disturbance observer. The design of the sliding mode tracking controller for the prescribed, accurate, and robust tracking performance without the chattering problem is given based on the results of the detailed stability analysis. The usefulness of the proposed algorithm is demonstrated through the computer simulations for a BLDDSM under load variations     

A k-out-of-N:G redundant system with dependent failure rates and common-cause failures

This paper presents a k-out-of-N: G redundant system with dependent failure rates, common-cause failures and r repair facilities. The failure rates of the components increase as the number of components failed increases, while the repair rates are constant. Common-cause failure is not considered in Model I. In Model II the common-cause failures are involved. Steady-state probabilities and steady-state availability are derived.     

Intestinal leakage of technetium-99m-MDP in primary intestinal lymphangiectasia

We present a case in which a patient with primary intestinal lymphangiectasia demonstrated abnormal intestinal accumulation of tracer during 99mTc-methylene diphosphonate (MDP) skeletal scintigraphy. Early intestinal leakage with gradual colonic migration and concentration was confirmed by repeat bone scan with serial acquisitions. The mechanism for the intestinal localization of 99mTc-MDP seen in this patient is not clear. Thus, intestinal lymphangiectasia can be a cause for extra-osseous localization of bone scan agents in the intestine.     

CO2 and Nd:YAG laser-induced pulmonary parenchymal lung injury in a rabbit model

Laser exposure of the pulmonary parenchyma during treatment of emphysema and other clinical indications causes acute lung injury. Animal investigations are needed to understand and control laser-induced lung injury. We hypothesized that lung injury is deeper from Nd:YAG laser exposures than CO2 exposures because of deeper penetration of Nd:YAG wavelength light. We compared the temporal evolution of histologic injury in rabbits resulting from continuous mode shallow CO2 and Nd:YAG laser pulmonary parenchymal exposures applied in rabbits. Forty-six New Zealand white (NZW) rabbits underwent treatment with CO2 laser (n=18), Nd:YAG laser (n=18), or sham thoracotomy control (n=10) to the visceral pleural surface using 1 min of exposure (5 watts, defocused to 70 W/cm2 power density for both lasers). Animals were killed at 0, 4, 7, 21, and 49 d after exposure. Lung injury, similar to that seen clinically in humans, developed in all laser-treated animals. Injury progressed from ischemia and vascular congestion, to edema and necrosis, followed by pleural and parenchymal fibrosis. The acute injury was qualitatively distinct and slightly deeper in CO2 than Nd:YAG-treated animals (p<0.02) despite the shallower depth of penetration of the CO2 laser. These findings may imply that higher absorption coefficient for CO2 laser energy results in greater focal temperatures and injury in the areas of direct exposure, and suggest that Nd:YAG laser exposure at these settings may cause shallower injury than CO2 lasers in humans undergoing clinical treatment.