基于出风温湿度检测的冷却塔防白雾控制装置设计

设计一种基于出风温湿度检测的冷却塔防白雾控制装置,该装置可实现出风温湿度参数的实时采集,并进行相应计算,根据计算结果判断冷却塔是否处于雾区,从而实现防白雾水泵的自动变压控制,利用电动阀控制最大进水量,实现较小混水量的消雾,节约成本。     

基于分压配气和流量配气的隔爆型设备爆炸试验控制系统

综合分压配气和流量配气的特点和优势,设计了基于分压配气和流量配气原理的自动化配气控制系统,用于I类、II类隔爆型设备(d)和III类可燃性粉尘环境外壳保型设备(tD)的耐爆和传爆试验。经试验测试与比对:该系统可靠性、精确度、稳定性和重复性方面均满足GB 3836.2-2010防爆试验所规定的要求,并具有节省试验时间和试验气源的优点。     

铸铝合金在有机羧酸体系中电化学陶瓷成膜

利用电化学沉积陶瓷膜（EDCF）技术将铸铝ZL108合金置于有机羧酸复合体系，制得了具有较高硬度和良好外观的灰色类陶瓷膜。详细研究了各工艺参数对膜层性能的影响，结果表明，有机羧酸是主要成膜物质；金属硫酸盐是阳极反应的活化剂，但浓度过高会加快膜层溶解；方波脉冲电源有利于生成厚膜；峰值电流密度越大，成膜时间越短，但过大会使膜层减薄；溶液pH值、搅拌等对成膜过程有一定影响。     

Novel Fabrication Route to Al2O3–TiN Nanocomposites Via Spark Plasma Sintering

A novel method for the preparation of Al₂O₃–TiN nanocomposites was developed. A mixture of TiO₂, AlN, and Ti powder was used as the starting material to synthesize the Al₂O₃–TiN nanocomposite under 60 MPa at 1400°C for 6 min using spark plasma sintering. X-ray diffractometry, scanning electron microscopy, and transmission electron microscopy were used for detailed microstructural analysis. Dense (up to 99%) nanostructured Al₂O₃–TiN composites were successfully fabricated, the average grain size being less than 400 nm. The fracture toughness ( K _{I C} ) and bending strength (σ_b) of the nanostructured Al₂O₃–TiN composites reached 4.22±0.20 MPa·m^1/2 and 746±28 MPa, respectively.     

The effect of sulfur on the dissociative adsorption of methane on nickel

The dissociative adsorption of methane was carried out on a Ni(100) surface covered with various amounts of sulfur under the high incident flux conditions of 1 Torr methane. Auger electron spectroscopy was used to measure the rate of carbon buildup and thus to determine the initial methane decomposition rates on the surface. It was shown that the sulfur atoms poison this reaction by a simple site-blocking process. These results are consistent with the activated dissociative adsorption of methane on Ni(100) occurring via a direct adsorption process.     

气升式内环流反应器中油滴的分散特性

本文研究了气升式内环流反应器中油滴的分散特性。以对数正态分布密度函数为油滴尺寸的分散模型,导出了油滴的Sauter平均直径解析式。对模型作了实验验证,关联了模型参数。提出了油滴的尺寸分布密度函数和Sauter平均直径的半经验式。结果表明计算值与实验值吻合良好。     

Construction of highly nonlinear resilient Boolean functions satisfying strict avalanche criterion

Boolean functions with high nonlinearity, high resiliency and strict avalanche criterion （SAC） play an important role in the designs of conventional cryptographic systems. In this paper, a method is proposed to construct resilient Boolean functions on n variables （n even） satisfying SAC with nonlinearity 〉 2n-1 -2n/2. A large class of cryptographic Boolean functions that were not known earlier were obtained.     

色谱顶空法测活度系数及对三元极性体系液液平衡预测

用气相色谱顶空分析法测定 18组部分互溶三元极性体系在完全互溶区的 3个组分活度系数 ,由此拟合出 U NIQU AC过量自由焓模型参数 ,再用 U NIQUAC方程预测液液平衡。这一方法曾很好地用在水-正烷烃 -醇体系。将此法拓展到含醇、酮、酯 ,醚、卤烷烃和水等多种极性组分的三元体系液液平衡的预测 ,其结果与文献的液液平衡数据比较 ,平均均方根误差 1.4 1% ,表明本法对含极性组分的体系仍然可行     

丁二烯在Ni（naph）2—n—C4H9Li—BF3.OEt2催化体系中的引发聚合

本文报道Ni(naph)_2-n-C_4H_9Li-BF_3·OEt_2催化体系对丁二烯的聚合活性.发现.只有Ni(naph)_2与n-C_4H_9Li二元陈化方式有较好的聚合活性.聚合物的特性粘度[η]和5％苯乙烯的动力粘度(η_(c.p)均低.顺式-1,4结构含量约为94％.几乎不生成凝胶。     

定向井技术在白庙气田产能建设中的应用

东濮凹陷白庙气田构造破碎、储层相变快、储量分布不均匀。如何以较少的钻井投资，尽量多地钻遇气层层数，以较少的钻井数最大限度地控制气田地质储量，是高效开发白质气田的难点。通过气田地质研究及气藏工程论证，提出定向井设计思路，并根据不同的地质条件，研究设计出不同类型的定向井，应用于白庙气田产能建设中，效果显著。