断路器机械特性及参数检测装置

论文介绍了所研制的断路器三相同步性检测装置,以国产DBA、DBG、DBB等九种断路器为研究对象,选用工控机、伺服电机、力传感器和高速数据采集卡设计了一套数据采集、处理系统,完成对其分合闸机械特性参数、力变化曲线和过程曲线的自动测量、显示、存储查询及打印,检测功能全、速度快、精度高,可以将断路器诸多机械特性的测量集于一体,大大简化了测量过程,节省人力物力.最后对其测量结果及适用性作了分析和评议.     

EFFECT OF LASER SCANNING SPEED ON PHASE CONSTITUTION AND WEAR RESISTANCE OF LASER CLADDING HARD FACING ALLOY STELLITE 12

Effect of laser scanning speed on phase constitution,microstructure,microhardness and wearresistance of laser-cladding hard facing alloy Stellite 12 has been investigated by means of across-flow-type CO_2 laser of 1.5 kW.The laser-cladding layer on the alloy consists of ma-trix phase of suppersaturated solid solution γ(Co,Cr)and complex hexagonal carbideM_7C_3.Under certain condition,at higher laser scanning speed,the suppersaturated solubilityof elements increases in γ(Co,Cr),and the precipitation of the complex carbtde M_7C_3 de-creases,so the microhardness increases and the wear resistance decreases.But at slower laserscanning speed,more complex carbide M_7C_3 may precipitate,and the wear resistance may beimproved.Therefore,it is believed that the principal factor in improving wear resistance is theprecipitation of carbide M_7C_3,while increment of microhardness is the suppersaturated solu-bility of elements in matrix phase γ(Co,Cr).     

高速电喷镀制备纳米PTFE镍基复合镀层

研究了以Q235和65Mn钢为基底,经高速电喷镀形成的纳米PTFE镍基复合镀层,考察了喷射速度对镀层沉积速率、表面显微硬度、结晶组织形貌以及镀层结合力的影响,探讨了喷射速度影响镀层性能组织的原因机理。结果表明,喷射速度在4.2～6.3m/s时获得的镀层有较高的沉积速率和表面硬度,晶粒细小、组织致密,镀层结合力较高。     

基于VB的凸轮轮廓测量平台的研制

介绍了凸轮轮廓测量平台的组成、工作原理和实现方法。首先，设计出了下位机测量电路的硬件和软件流程；其次，给出了下位机与上位机之间传输数据格式；最后，基于VB6．0的环境设计出上、下位机通信和测量数据管理分析软件。该测量平台可以应用于凸轮机构的教学、设计和制造过程。     

自修复三氧化二铝涂层研究

结构材料表面涂层是解决聚变堆液态金属自冷却包层中的磁流体动力学压降(MHD)的主要方法之一.探讨了在包层结构材料表面直接形成电绝缘三氧化二铝涂层的液体渗铝法,并对渗层结构和表面三氧化二铝的形貌和成分分布进行了多种电子显微分析.研究结果表明:液体渗铝法是制作自修复三氧化二铝涂层的可靠方法,但渗铝和氧化工艺对涂层性能影响较大.     

800kN锻压机锻压力的标定

负载传感及指示装置（IMCO）作为锻压力指示和锻压机保护的装置，对它进行适时标定，尤为重要。在此对其标定原理作一介绍，为锻压机的安全运行及操作工在锻压机工作能力的范围内合理操作提供了可靠的保障。     

表面处理状态对Fecralloy合金氧化膜完整性的影响

研究了表面粗糙度对Fecralloy (Fe 2 2Cr 5Al 0 .3Y ,质量分数 ,% )合金在 12 0 0℃空气中循环氧化生成表面氧化膜完整性的影响。采用SEM技术着重研究了合金表面氧化膜的性质和特点。结果表明合金表面粗糙度对Fecralloy合金表面氧化膜的完整性有重要的影响 ,初始合金表面粗糙度越大 ,氧化膜越容易开裂。讨论了合金表面粗糙度对氧化膜开裂行为的影响。     

高强度螺栓断裂原因分析

对断裂的高强度螺栓进行了成分、性能及微观形貌结构等分析。结果表明，螺栓断裂为疲劳断裂及氢脆和应力腐蚀断裂．氢脆主要发生于裂纹形成初期。     

纳米热喷涂技术的研究现状与展望

介绍了纳米热喷涂结构涂层的组装、涂层结构与性能等方面的研究现状，并展望了纳米热喷涂技术的发展前景。     

Melting behavior of magnesium alloy chips in thixomolding process

The samples were fabricated by 220 t thixomolded machine made by Japan Steel Works. The microstructure from the AZ91D magnesium alloy chips to the thixomolded products was investigated. Melting behavior of the chips in thixomolding process was analyzed. The evolution processing of solid phase morphology was studied, and evolution model was put forward. The results show that microstructures in outer zone of a chip and the inner zone are obviously different, and the severe distortion takes place in the brim of the chip, where the grains are observed to be bent, distorted, even broken. The severe plastic deformation region is firstly molten, then segregation area in the inner of the chip continues to melt. The liquid phase in solid phase does not formed by liquid entrapped during shearing process, but primarily induced by internal composition segregation.