Control of buoyancy-induced temperature and flow fields with an embedded adiabatic thin plate in porous triangular cavities

Natural convection has been performed in an insulated horizontally thin plate embedded in a triangular enclosure filled with fluid saturated porous medium, numerically. Bottom and inclined wall of triangular enclosure are isothermally heated and cooled, respectively. Vertical wall of enclosure is adiabatic. Steady, two-dimensional, laminar governing equations, which are written with Darcy model, were solved with finite-difference method. Calculations are conducted for different lengths and locations of thin plate, different aspect ratios, and Darcy-modified Rayleigh number. Prandtl number was chosen as 0.71. It is observed that the change on plate location in vertical and horizontal axes makes small effect on heat transfer; however flow field and temperature distribution strongly affected from these parameters.     

Experimental study of heat transfer of buried finned pipe for ground source heat pump applications

Ground heat exchangers have vital importance for ground source heat pump applications. Various configurations tried to improve heat transfer in the soil. A new kind of aluminium finned pipe buried in the soil for this aim. In order to compare effectiveness of the Al finned pipe over the traditional PPRC pipe an experimental study carried out. The experimental GSHP system was installed at Y?ld?z Technical University Davupasa Campus on 800 m² surface area with no special surface cover. Temperature data were collected using thermocouples buried in soil horizontally and vertically at various distances from the pipe center and at the inlet and the outlet of the ground heat exchanger. Experimental results were compared with results from analytical study. To compare effectiveness of the Al finned pipe and PPRC pipe a new parameter defined as transferred amount of heat per unit mass of working fluid per unit time for this aim. It is found that Al finned pipe has higher heat transfer values than the traditional PPRC pipe.     

Performance assessment of an internal combustion engine at varying dead (reference) state temperatures

This study deals with investigating the effect of varying dead state temperatures on exergy efficiency of a high-oleic methyl ester (HOME) fueled internal combustion engine (ICE). This engine is a 4.5L, four-stroke, four-cylinder, turbocharged, 66.5 kW maximum power capacity John Deere 4045T diesel engine run with HOME, which is genetically modified with a high-oleic soybean oil methyl ester. The test speed is 1400 min⁻¹ at a full load. In the analysis, actual operational data obtained from a study conducted by one of the co-authors at Iowa State University, USA are used. Exergy efficiency values at various dead state temperatures are calculated for comparison purposes since these types of engines may be operated under different outdoor air conditions. The results obtained are discussed from the exergetic point of view. It was found that exergetic efficiency increased as dead state temperature decreased. As a result, exergy efficiency values ranged from 29.78% to 34.93% based on dead state temperatures between −5 °C and 30 °C.     

MHD mixed convection of a Cu–water nanofluid flow through a channel with an open trapezoidal cavity and an elliptical obstacle

In the current work, numerical simulations are achieved to study the properties and the characteristics of fluid flow and heat transfer of (Cu–water) nanofluid under the magnetohydrodynamic effects in a horizontal rectangular canal with an open trapezoidal enclosure and an elliptical obstacle. The cavity lower wall is grooved and represents the heat source while the obstacle represents a stationary cold wall. On the other hand, the rest of the walls are considered adiabatic. The governing equations for this investigation are formulated, nondimensionalized, and then solved by Galerkin finite element approach. The numerical findings were examined across a wide range of Richardson number (0.1 ≤ Ri ≤ 10), Reynolds number (1 ≤ Re ≤ 125), Hartmann number (0 ≤ Ha ≤ 100), and volume fraction of nanofluid (0 ≤ φ ≤ 0.05). The current study's findings demonstrate that the flow strength increases inversely as the Reynolds number rises, which pushes the isotherms down to the lower part of the trapezoidal cavity. The Nu_avg rises as the Ri rise, the maximum Nu_avg = 10.345 at Ri = 10, Re = 50, ϕ = 0.05, and Ha = 0; however, it reduces with increasing Hartmann number. Also, it increase by increasing ϕ, at Ri = 10, the Nu_avg increased by 8.44% when the volume fraction of nanofluid increased from (ϕ = 0–0.05).     

Detection of the frequency, antimicrobial susceptibility, and genotypic discrimination of Aeromonas strains isolated from municipally treated tap water samples by cultivation and AP-PCR

The frequency, antibiotic susceptibility, and genotypic discrimination of Aeromonas strains isolated from municipally treated drinking tap water distribution systems were investigated in this study. We have analyzed 148 tap water samples collected from 8 different locations by bacterial cultivation and arbitrarily primed polymerase chain reaction (AP-PCR). Gram negative, hemolytic, oxidase (+) and catalase (+) bacterial colonies were applied to the study. Identification of bacterial colonies was done by conventional biochemical method and API ID 20E panel (BioMerieux-France). Molecular epidemiological discrimination of the isolates was done by AP-PCR. Aeromonas spp. was detected in 6 of 148 (4%) tap water samples from 8 different locations. Five isolates were identified as Aeromonas hydrophila and one isolate was identified as Vibrio fluvialis by conventional biochemical method. These data were also confirmed by API 20E panel. One of 6 isolates was resistant to gentamicin, 2 of 6 isolates were resistant to trimethoprim/sulfamethoxazole, 4 of 6 isolates were resistant to ampicillin and ampicillin-sulbactam and all of 6 isolates were resistant to cephalothin. All isolates were found to be susceptible to amikacin, aztreonam, ceftazidime, ceftriaxone, ciprofloxacin. All 6 strains of Aeromonas were discriminated by AP-PCR and were determined that all isolates were from different genotypic sources. Although the frequency of the isolates was under the standard limits, the results indicate that hemolytic A. hydrophila are present in municipally treated tap water samples in Mersin City. While all strains were genotypically distinct, all of them were resistant to first generation beta lactam antibiotics tested in this study.     

A heatline analysis of natural convection in a square inclined enclosure filled with a CuO nanofluid under non-uniform wall heating condition

Heatline visualization technique is used to understand heat transport path in an inclined non-uniformly heated enclosure filled with water based CuO nanofluid. The cavity has square cross-section and it is non-uniformly heated from a wall and cooled from opposite wall while other walls are adiabatic. The governing equations which are continuity, momentum and energy equations are solved using finite volume method. The dimensionless heatfunction for nanofluid heat flow is defined and solved to determine heatline patterns. Calculations were performed for Rayleigh numbers of 10³, 10⁴ and 10⁵, inclination angle of 0°, 30°, 60° and 90°, and nanoparticle fraction of 0, 0.02, 0.04, 0.06, 0.08 and 0.1. It is observed that heat transfer in the cavity increases by adding nanoparticles. The rate of increase is greater for the enclosures with low Rayleigh number. Visualization of heatline is successfully applied to nanoparticle convective flows. Based on the heatline patterns, three heat transfer regions are observed and discussed in details.     

Numerical analysis of heat transfer due to slot jets impingement onto two cylinders with different diameters

A numerical investigation has been performed two-dimensional slot impingement onto two heated cylinders with different diameters turbulent flow conditions. Height of slot jet is taken as constant for all cases. The study is performed to see the effects of effective parameters on heat and fluid flow as jet Reynolds number (11,000 ≤ Re ≤ 20,000), diameter ratio of cylinders (0.5 ≤ D₁/D₂ ≤ 1.5) and ratio of distance between cylinders to slot jet high (L/S). Streamlines, isotherms, local and mean Nusselt numbers and Cd coefficient were obtained. These results were compared with earlier experimental and numerical works and good agreement was obtained. It is found that diameter ratios of cylinders can be a control element for heat and fluid flow.     

Effect of reuterin produced by Lactobacillus reuteri on the surface of sausages to inhibit the growth of Listeria monocytogenes and Salmonella spp

Reuterin is a bacteriocin produced by some strains of Lactobacillus reuteri. The strain used in this study was isolated from raw milk from a dairy farm nearby Ankara. Beef sausage is a long years produced bratwurst style meat product in Turkey, as well as in some other countries in the Mediterranean region. Sausages are produced by raw meat; sometimes lactic starter cultures are added or spontaneous fermentation is employed. The production and storage conditions of the product promotes the growth of Listeria monocytogenes and Salmonella spp. Although nitrate is added as an antimicrobial substance against many pathogens, sometimes however nitrate application is not preventive enough on the surface because of the natural film around the sausages. Since most of the contaminations take place at post production steps, pathogenic growth is more effective on the surface of the sausages in refrigerated conditions. In this study, reuterin was applied to the surface of the sausages in order to prevent the growth of these two pathogens along with nitrate used as an additive in the product. Reuterin has inhibited the growth of L. monocytogenes considerably but not of Salmonella spp. on the surface of the sausages.     

Adaptive control of let-off system in weaving

In this study, semi-positive let-off system in a conventional weaving loom was controlled using conventional, PID (Proportional Integral Derivative) and fuzzy logic based control systems. To do this, servomotor was installed into the let-off unit of the loom using PID controller, additionally fuzzy logic based let-off control was realised. Experimentally obtained warp tension values for each control methods were compared. According to the results, maximal tension values for the conventional, PID and fuzzy logic controlled systems were found to be 53, 45 and 35 cN, respectively. As a result, it is determined that the least warp tension interval and mean warp tension value are in let-off system controlled by fuzzy logic.     

Heat pipes thermoelectric solar collectors for energy applications

This study investigates the load characteristics of heat pipe thermoelectric solar collector (HPTSC) in practice. Heat pipe thermoelectric solar collector converts the heat generated by the Sun directly into electrical energy and produces hot water as well. The maximum power in HPTSC is obtained when the internal resistance of the thermoelectric module is equal to the load resistance. It has been observed to be possible to produce both hot water and electricity by improving available solar collectors or producing new generation HPTSC. While it is possible to generate an electrical power of 160 W from a HPTSC of one square meter using the thermoelectric method, the power produced with an average photovoltaic panel with the same area is only 132 W. Accordingly, HPTSC is a superior alternative not only to available solar collectors, but also to available PV panels. HPTSC, involving three different technologies, is environmentally friendly and certainly a product that allows for more efficient use of solar energy.