含V、N无缝钢管表面外折缺陷产生原因的分析

通过对鞍钢生产的部分批号V、N微合金强化无缝钢管及生产该钢管的原料连铸坯和连轧管坯的表面缺陷进行研究，分析了含V、N钢管表面外折缺陷的成因，提出了改善钢管表面质量的方法。采用改进后工艺生产的无缝管，其表面外折废品量大幅度降低。     

矿石中金的快速测定

研究了活性炭纤维滤布富集分离的条件和解脱方法,并利用微波溶样、液珠萃取比色法测定矿石中的金。该方法的测定范围为(0.5~xx)×10-6,相对标准偏差RSD为3.2%,可用于矿石中金的野外快速测定。     

Multimode parameter extraction for multiconductor transmissionlines via single-pass FDTD and signal-processing techniques

We present two approaches to extract the broadband multimode parameters of guided wave structures from a single-pass finite-difference time-domain (FDTD) simulation. They include a two-dimensional (2-D) Fourier transform (FT) algorithm and a super-resolution estimation of signal parameters via rotational invariance technique (ESPRIT) algorithm. Comparison is made to show the superiority of the super-resolution approach. As a typical application, a three-line coupled microstrip structure is studied. After a single-pass FDTD simulation, broadband multimode parameters such as propagation constants, modal-field templates, and modal impedances are extracted and verified against published data obtained by the spectral-domain method. The main feature of this parameter-extraction methodology is that it decouples the computational electromagnetics engine (in this case, the FDTD simulator) from the post-processing parameter-extraction algorithm, thus providing more flexibility and connectivity among the various simulation tools     

溅射——气体——聚集共沉积法制备金属／金属（介质）复合团簇镶嵌薄膜

提出了溅射－气体－聚集共沉积制备金属／金属（介质）复合团簇镶嵌薄膜的新方法，并利用该方法成功地在方华膜衬底上制备了系列Ｆｅ／Ａｇ及ＣａＦ２复合团簇镶嵌薄膜样品。透射电镜分析结果表明，样品中Ｆｅ（Ｃｕ）团簇都较好地镶嵌于Ａｇ（ＣａＦ２）基质中，其结构为两种材料的多晶共存形态。进一步分析发现，与块材相比，Ｆｅ／Ａｇ样品中Ｆｅ团簇晶格常数呈现出不同程度的收缩，而Ｃｕ／ＣａＦ２样品中Ｃｕ团簇晶格常数则呈现出不同程度的膨胀。运用附加压力的模型对该现象进行了解释。     

聚合物复合材料填充剂的改性

在前人研究的基础之上，归纳总结了聚合物复合材料填充剂的种类，综述了对其进行表面改性的目的、条件、方法、工艺以及对改性结果的表征等。文章还分析了影响填充聚合物复合材料性能的因素，指出了今后发展的方向。     

B－ISDN与现有网络互连的研究

本文主要围绕Ｂ－ＩＳＤＮ与现有各种网络（如ＰＳＰＤＮ、ＰＳＴＮ、ＬＡＮ等）的互连问题展开讨论，并针对不同的应用场合提出了相应的互连解决方案。     

非线性隔振理论初探

本文以线必阻尼，立方刚度非线性系统为例，对非线性隔振理论进行了初步探讨，导出了系统的无量纲运动响应和传递率，并与线性隔振系统进行了比较，着重讨论了非线性对它们的影响，获得了一些有用的结论。     

A Progressive Radiosity Algorithm for Scenes Containing Curved Surfaces

Based on the theory of light energy transfer between two differential diffuse surface areas, a generalized radiosity approach is presented. Unlike the conventional radiosity method, curved surfaces are subdivided into triangular surface patches, radiosity is assummed to be vary across each triangular surface patch. By adopting linear interpolation scheme over each triangular surface patch, we have established a complete set of approximated radiosity equations. Their unknowns are radiosities of differential surface areas located at all vertices of surface patches. The generalized radiosity equation has also been extended to non-diffuse environments. Theoretical analysis and experimental results demonstrate the great potential of this method,     

MIPS/W8位低功耗嵌入式RISC MCU核的设计

介绍了一种8位低功耗嵌入式RISC MSC核的设计.该核采用哈佛结构,三级流水线,单周期指令,指令集与PIC16C57相兼容.本文还对系统结构设计及各单元模块设计进行了分析.