Lubricating behavior of iron rhenate and its relation to matching pairs

The iron rhenate was compounded by chemical method, which may be generated during wear process of Fe-Re alloys at elevated temperature. The friction coefficient of iron rhenate has been determined by a pin-on-disc device. The results show that iron rhenate plays role of lubricating at RT-600 °C. The lubricating behavior is related to the matching pairs. The hardness of the materials of matching pairs, compatibility of iron rhenate with materials of matching pairs and surface roughness of disc affect the lubricating behavior of iron rhenate mostly. The principle of matching pairs is proposed. Project supported by the National Natural Science Foundation of China Synopsis of the first author Xiong Dangsheng. associated professor, born in 1960. Current research fields include high-temperature self-lubricating alloys and tribological properties of material.     

创新铁路运输方式实现750m^3高炉富余铁水分流

针对750m^3高炉铁水生产富余状况，制订了富余铁水向铸铁机铸铁的调送方案，通过创新思维、系统挖潜、优化资源配置等措施的实施，保证了750m^3高炉的正常生产，取得了良好效果。     

Author's reply to “Comments on ‘Performance evaluation of UKF-based nonlinear filtering”’

It is stated in the above-mentioned comment that the main result of the paper Xiong, Zhang, et al. [(2006). Performance evaluation of UKF-based nonlinear filtering. Automatica 42(2), 261-270] can be extended to a class of filters, such as the extended Kalman filter (EKF). As we show here, this belief can be justified in a rigorous way, even for the nonlinear stochastic system with a nonlinear measurement equation.     

Dielectric loaded HTS resonators as frequency standards andlow-phase noise oscillators

High-quality, high-temperature superconducting (HTS) thin-films exhibit very low losses at microwave frequencies and, as a result, allow very high Q resonators to be produced. The size of such resonators may be significantly reduced by loading with low-loss single crystal dielectric. The potential for HTS dielectric loaded resonators as practical frequency standards and reference elements for low-phase-noise oscillators is assessed, with emphasis on operation at 60 K, a temperature readily attainable with compact Stirling cycle coolers     

Scattering center parameterization of wide-angle backscattered datausing adaptive Gaussian representation

We present a scattering center extraction algorithm to parameterize the backscattered data from complex targets collected over large angular apertures. This parameterization is based on a scattering center model of the target, but includes an aspect-dependent amplitude function for each scattering center. A two-dimensional (2-D) adaptive Gaussian representation (AGR) algorithm is used to extract the position and the amplitude function associated with each scattering center. The algorithm is tested with data generated by the Xpatch radar simulation code as well as chamber measurement data. The results show that a very good compression ratio can be achieved, resulting in a compact scattering center model of the target. Once such model is available, we can easily reconstruct range profiles and ISAR images at any aspect on the same plane with good accuracy     

Dislocation configurations in highT c oxide BiSrCaCuO

A study of dislocation configurations in superconducting oxide BiSrCaCuO has been made by transmission electron microscopy. Evidence was found for the presence of dislocation pairs composed of two parallel single dislocations holding together with the same Burgers vectors. The pair can further dissociate into partials, giving rise to a four-fold ribbon. Networks consisting of dislocation pairs were also observed. These phenomena are attributed to the possible ordering of strontium and calcium ions and the existence of some oxygen sheet of the Aurivillius type in the oxide crystal. Schemes to illustrate the configurations are suggested and discussed.     

气流粉碎技术在氢氧化铝生产中的应用

论述了氢氧化铝粉体填料的用途、应用现状及加工现状,该产品目前在供应与需求方面显现出的矛盾.针对此项问题阐述了选用气流粉碎磨生产氢氧化铝粉体材料的目的、意义,充分对比了气流粉碎磨和普通万能粉碎磨的SiO2%,Fe2O3%,Na2O%,+320%、附水等产品质量指标,产能和电单耗等消耗指标.气流粉碎技术在氢氧化铝粉体生产中应用之后,氢氧化铝粉体填料的质量得到了比较大的提高,创造了可观的经济效益;同时,生产能力有较大幅度提高,且设备自动化程度高,有效减轻了职工的劳动强度.     

基于自组织神经网络的实时统计特征抽取方法

应用人工神经网络讨论统计了特征抽取的原理，提出了相应的抽取方法。该方法具有实时性，容错性，高数据压缩率和良好的特征分辨率。通过计算机仿真和桥梁索力状态的实例计算分析证实了该技术具有广泛的应用价值。     

Synthesis and characterization of block copolymers from D,L-lactide and poly(tetramethylene ether glycol)

The copolymer from D ,L -lactide and poly(tetramethyene ether glycol) (PTMG) was prepared in bulk with an isotributyl aluminum–water–phosphoric acid complex catalyst as the initiator and characterized by H-NMR, GPC, and DSC. The effects of the temperature and the amount of PTMG on the polymerization rate and the molecular weight of copolymers were studied. The behavior of the degradation and delivery rate of Levonorgestrel microspheres in vitro was observed. The results show that the degradation and the delivery rate can be controlled by adjusting the molar rate of hydrophilic and hydrophobic segments of the copolymer © 1995 John Wiley & Sons, Inc.