Improved method for HgI2 crystal growth and detector fabrication

Instead of the temperature oscillation method (TOM), a modified vapor growth method was applied in this paper to grow large HgI₂ crystals with fewer lattice defects by providing a relatively stable temperature field during growth. And a new processing technique of HgI₂ crystals was developed for detector fabrication by merging solution string-sawing and hand-cleaving. The lattice deformations caused during cleaving were reduced greatly by eliminating passivated layers on the sawed crystal platelets before cleaving.     

流延法制作AlN陶瓷基片工艺

研究出一种用流延法制作ＡＩＮ陶瓷基片的工艺。制备出性能优良的ＡＩＮ基片。经１６５０℃，保温２ｈ无压烧结制得的基片，其热导率达１３０Ｗ／（ｍ·Ｋ）、密度为３．３４ｇ／ｃｍ￣３，表面光滑平整，瓷体结构均匀，性能达到用干压法制备的同类基片的性能。     

聚吡咯导电材料合成方法的进展

本文对聚吡咯及聚吡咯导电复合物的合成方法进行了综述。     

ELNF演算的解释技术

ＥＬＮＦ演算是我们在ＬＮＦ演算的基础上扩充逻辑程序设计能力而得到的一种函数／逻辑演算系统，它构成了作者设计的函数／逻辑语言ＲＦＵＮＬＯＧ的基础．本文介绍ＥＬＮＦ演算的解释实现技术，包括数据结构、系统结构以及各个模块的设计思想．最后给出了在此解释系统下，几个典型程序的运行时间．     

A theory for the formation of tetrahedral amorphous carbon including deposition rate effects

A theoretical model is presented to describe the effect of ion beam bombardment rate on the formation of tetrahedral amorphous carbon (ta-C) films. The critical ion energy, E_c, corresponding to a 50% sp³ content in the films, is found to be dependent on both the effective thermal resistance and the ion beam bombardment rate. In the model, the ‘window’ width in the ion energy scale for the formation of ta-C material increases with decreasing deposition rate and with a reduction in the effective thermal resistance, until limited by lower and upper boundary thresholds. Experimental data are reproduced by the model. The plasmon energy, which correlates with sp³ fraction, is found experimentally of be higher for lower deposition rate and smaller effective thermal resistance. Data points for high sp³ content ta-C films deposited on silicon substrates at room temperature occupy a region in the ion energy-deposition rate (E-r) diagram similar to that predicated from the theory.     

关于最优等效替代法的实质及其应用条件的研究

本文研究了经济分析基本方法之一最优等效替代法的实质,系统地导出了被评价方案的绝对经济指标与相对经济指标的关系,并结合典型案例分析指出了该方法的应用条件,对正确进行建设项目的经济评价具有现实意义。     

含碳冷固结团矿还原性测定方法探讨

含碳冷固结团矿与天然铁矿石、烧结矿、氧化球团矿不同、其还原性不能用减量法直接测定，需要根据还原后试样的化学成分计算获得，或根据试样中碳量的变化和试样的减量计算获得，但还原速率指数无法得到，本文以沙城铁厂试样为例进行了说明。     

异步时序型PAL解析方法的研究及解析结果分析

本文就异步时序现ＰＡＬ的解析，提出了一种状态图遍历算法。     

一个全数字化交流永磁伺服系统

介绍了开发的全数字交流伺服系统的组成、基本原理及软、硬件结构。通过与模拟交流伺服系统的比较，说明了全数字交流伺服系统可编程能力强、系统稳定性好、系统性能提高等特点。     

铜蒸汽激光器双闸流管触发系统的研究

研制成用于钢蒸汽激光器的双间流管触发系统。用两个闸流管并联进行交替触发，总输入电功率达7．8kW。低功率运行时，激光器的效率为0．6％与单间流管激光器的效率一致。