MobileNAT: A New Technique for Mobility Across Heterogeneous Address Spaces

We propose a new network layer mobility architecture called Mobile NAT to efficiently support micro and macro-mobility in and across heterogeneous address spaces common in emerging public networks. The key ideas in this architecture are as follows: (1) Use of two IP addresses – an invariant virtual IP address for host identification at the application layer and an actual routable address at the network layer that changes due to mobility. Since physical address has routing significance only within a domain, it can be a private address and therefore, does not deplete the public IP address resource. (2) New DHCP enhancements to distribute the two addresses. (3) A new signaling element called Mobility Manager (MM) that uses Middlebox Communication (MIDCOM) framework to signal the changes in packet processing rules to the Network Address Translators (NATs) in the event of node mobility. Our proposal does not require any modifications to the access networks and can seamlessly co-exist with the existing Mobile IP mechanisms and therefore, can be used to provide seamless mobility across heterogeneous wireline and wireless networks. We report implementation details of a subset of our ideas in a testbed with Windows XP clients and Linux based NATs. Milind M. Buddhikot is a Member of Technical Staff in the Center for Networking Research at Lucent Bell Labs, Holmdel, NJ. Milind holds a Doctor of Science (D. Sc.) in computer science (July 1998) from Washington University in St. Louis, and a Master of Technology (M.Tech.) in communication engineering (December 1988) from the Indian Institute of Technology (I.I.T), Bombay. His current research interests are in the areas of systems and protocols for integrated public wireless networks, authentication and dynamic key exchange protocols, Voice-over-IP (VOIP) networks, and sensor and ad-hoc networks. He has authored over 26 research papers and 9 patent submissions in the areas of design of multimedia systems and protocols, layer-4 packet classification, MPLS path routing, authentication and dynamic key exchange, and 802.11/3G integration. Milind currently serves as the Associate Editor of the IEEE/ACM Transactions on Networking. He also served as a co-guest-editor of IEEE Network magazine’s March 2001 Special issue on Fast IP Packet forwarding and Classification for Next Generation Internet Services. He has served in the capacity of a tutorial chair for IEEE LCN 94, 95, as a publicity chair for NOSSDAV97, and as a program committee member for MMCN 2001, 2003, IEEE ICNP2002, 2003 and IEEE LCN 93-2000 conferences. Adiseshu Hari received a Doctorate in Computer Science from Washington University in St. Louis in 1999, and has since been at Bell Labs, Lucent Technologies, where he’s worked on projects related to network design and optimization. He’s currently looking at design issues in large scale SIP based VoIP networks. Kundan N. Singh received a B.E.(Hons) degree in Computer Science from Birla Institute of Technology and Science in India, M.S. in Computer Science from Columbia University, and is continuing his studies towards Ph.D. degree in the same field at Columbia University in New York City. As a research assistant in the Internet Real-Time Lab at Columbia University, he is doing research on Internet telephony, SIP-H.323 signaling gateway, unified messaging systems and multimedia conferencing. Scott Miller is the Director of the High Speed Mobile Data Research department at Bell Labs in Holmdel, New Jersey. He has B.S. and M.S. degrees in electrical engineering from Cooper Union in New York City. His current research involves the integration of 802.11 and 3G wireless data service and the related mobile networking issues concerning seamless mobility, authentication, security, roaming, and accounting. Prior to his work on 802.11/3G integration, Scott has led several systems research efforts in wireless applications, implementing novel systems for wireless messaging, speech-driven directory services, wireless instant messaging, carrier-based content billing, and multi-media content adaptation.This revised version was published online in August 2005 with a corrected cover date.     

The kinetics of the gaseous extraction of gallium from mica

The gaseous reduction of gallium in white mica has been studied using natural gas as the reducing gas. From a study at three temperatures, the initial extraction was observed to be linear with time and independent of particle size. The results suggest that delamination of the mica lattice is important. The measured activation energy for the loss of gallium from the white mica is 184 × 21 kJ mol^?1.     

Regression analysis of surface roughness and micro-structural study in rotary ultrasonic drilling of BK7

Ceramic materials have tremendous demand in manufacturing sectors. However, poor machinability impedes their widespread applications on an industrial scale. BK-7 falls in the same category and is normally processed by ultrasonic machining. But nowadays rotary ultrasonic machining is overtaking the ultrasonic machining for processing difficult to cut materials because of its superlative material removal mechanism. Current study aims to improve the surface quality of BK7 by studying the effect of input factors on surface roughness during rotary ultrasonic machining. Response surface methodology has been used to observe the effect of input variables ― spindle speed, feed rate and ultrasonic power ― on surface roughness (SR). Thereafter, central composite design was employed to estimate the regression coefficients of quadratic model for surface roughness. Fitness of developed quadratic model was checked by ANOVA test, which also revealed that all the model terms of input factors were significant except feed and speed interaction. Feed has the maximum impact over surface roughness descended by moderate impact of power and spindle speed. The study was further reinforced on observing the surface integrity of processed surfaces using scanning electron microscopic images. Mixed flow of material was observed to occur at lower feed rate and higher levels of rpm and ultrasonic power.     

Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications

In this work, the viability of producing biogenic hydroxyapatite from bio-waste animal bones, namely bovine (cow), caprine (goat) and galline (chicken), through a heat treatment process has been investigated. The animal bones were locally sourced, cleaned to remove collagen and subsequently heat treated in air atmosphere at different temperatures ranging from 600?°C to 1000?°C. From the range of sintering temperatures investigated, it was found that hydroxyapatite derived from bovine bone showed good thermal stability while those produced from caprine and galline bones exhibited phase instability with traces of tri-calcium phosphate (TCP) being detected after heat treatment beyond 700?°C. The porous nature of the bone samples can be observed from the microstructures obtained and supported by low relative density. Heating the bovine and caprine bones at selected temperatures yielded porous HA body, having hardness values that are comparable with human cortical bone. However, the sintered galline bone sample showed higher porosity levels and low hardness when compared to the other two bone types.     

Flow visualization of Rayleigh–Bénard convection for cubical cavity

Natural convective flow of air inside the cubical cavity is investigated numerically. The temperature of the bottom wall is kept higher than that of top cold wall, and other four walls are assumed to be adiabatic. Attention has been paid to the convective discretization schemes, like upwind, QUICK, total variation diminishing, normalized variable diagram (NVD) schemes that are compared with respect to accuracy. The output is validated with respect to the results available in the literature. A parallel computing message passing interface code is adapted to run the simulations. From the results, it is observed that the NVD scheme gives better results among all the employed convective discretization schemes irrespective of the mesh structure. Thus, in this article, self filtered central differencing which is a family of NVD, is used. From the enormous output data, along with the streamlines, contours of isotherms, the new technique of energy pathlines, and field synergy are used to visualize the fluid flow and heat transfer mechanism arising in the system in the range of Ra from 10³ to 10⁶. Free energy streamlines are observed with small Ra, whereas trapped energy streamlines are observed with high Ra. When Ra increases, synergy angle increases and implies that the synergy between the velocity vector and temperature gradient gets reduced and leads to increasing values of average Nusselt number (Nu).     

Anthocyanin-rich fruit vinegar from Grewia and Cantaloupe fruit blends

Grewia is a tropical berry rich in anthocyanins and antioxidants but highly perishable in nature. In this study, desirable composite blend of overripe Grewia (Phalsa) berries and cantaloupe was sought for conversion to acetic acid. Composition of raw macerate, and the alcoholic and acetic ferments was analysed for sugars, alcohol and acetic acid. The primary alcohol yield varied significantly (5.75–99.44%) with blend composition. Vinegar from select blend attained 4.98% acidity with 138.57 mg mL⁻¹ of phenols and high anthocyanins retention (74.77%). Gompertz model was used to fit the growth curves of S. cerevisiae and A. aceti (R²> 0.92) during fermentation. Presence of ethyl acetate, iso-pentyl alcohols explained pleasant sweet fruity aroma of resulting vinegar. Thus, high quality functional red fruit vinegar can be obtained to prevent spoilage and utilise the functional potential of this delicate and nutritious berry.     

Dark fermentative biohydrogen production by Acinetobacter junii-AH4 utilizing various industry wastewaters

Hydrogen (H₂) is one of the most promising renewable energy sources, anaerobic bacterial H₂ fermentation is considered as one of the most environmentally sustainable alternatives to meet the potential fossil fuel demand. Bio-H₂ is the cleanest and most effective source of energy provided by the dark fermentation utilizing organic substrates and different wastewaters. In this study, the bio-H₂ production was achieved by using the bacteria Acinetobacter junii-AH4. Further, optimization was carried out at different pH (5.0–8.0) in the presence of wastewaters as substrates (Rice mill wastewater (RMWW), Food wastewater (FWW) and Sugar wastewater (SWW). In this way, the optimized experiments excelled with the maximum cumulative H₂ production of 566.44 ± 3.5 mL/L (100% FWW at pH 7.5) in the presence of Acinetobacter junii-AH4. To achieve this, a bioreactor (3 L) was employed for the effective production of H₂ and Acinetobacter junii-AH4 has shown the highest cumulative H₂ of 613.2 ± 3.0 mL/L, HPR of 8.5 ± 0.4 mL/L/h, HY of 1.8 ± 0.09 mol H₂/mol glucose. Altogether, the present study showed a COD removal efficiency of 79.9 ± 3.5% by utilizing 100% food wastewater at pH 7.5. The modeled data established a batch fermentation system for sustainable H₂ production. This study has aided to achieve an ecofriendly approach using specific wastewaters for the production of bio-H₂.     

A novel hybrid hypervolume indicator and reference vector adaptation strategies based evolutionary algorithm for many-objective optimization

Engineering with Computers - A novel hybrid many-objective evolutionary algorithm called Reference Vector Guided Evolutionary Algorithm based on hypervolume indicator (H-RVEA) is proposed in this...