Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing – A novel Rheo-process

Particulate metal matrix composites (PMMCs) have attracted interest for application in numerous fields. The current processing methods often produce agglomerated particles in the ductile matrix and as a result these composites exhibit extremely low ductility. The key idea to solve the current problem is to adopt a novel Rheo-process allowing the application of sufficient shear stress (τ) on particulate clusters embedded in liquid metal to overcome the average cohesive force or the tensile strength of the cluster. In this study, cast A356/SiC_p composites were produced using a conventional stir casting technique and a novel Rheo-process. The microstructure and properties were evaluated. The adopted Rheo-process significantly improved the distribution of the reinforcement in the matrix. A good combination of improved ultimate tensile strength (UTS) and tensile elongation (ε) is obtained.     

Adsorption of Cu, Cd, and Ni on goethite in the presence of natural groundwater ligands

The adsorption of copper, cadmium, and nickel on goethite was examined in natural groundwater samples from an infiltration site of the river Glatt at Glattfelden (Switzerland). Unfractionated dissolved organic matter was used at its natural concentrations. Metal concentrations were close to environmental conditions. Cu, Cd, and Ni presented the typical pH adsorption edge of cations. The major influence on metal adsorption was due to a strong organic ligand L(I), which inhibited adsorption of Cu, Cd, and Ni in the alkaline pH region. Complexation of Cu, Cd, and Ni by the natural organic ligands was described with a model defining a minimum number of discrete ligands: a strong ligand L(I) at low concentration and additional weaker ligands with higher concentrations. The adsorption of Cu, Cd, and Ni on the goethite surface in the presence of the natural organic ligands was adequately described by considering only surface complexation and complexation in solution by organic ligands. No ternary complexes had to be invoked in the model. The major effect was complexation by the strongest ligand, whereas interactions with other cations and anions had only a minor influence. Competition reactions between Cu and Ni for complexation with the same strong ligand L(I) were observed.     

Error resilient video over multimedia broadcast multicast services (MBMS)

With available data rates for mobile devices constantly increasing, services such as video broadcast and multicast are becoming feasible. A new standard called Multimedia Broadcast Multicast Services (MBMS) is being developed by 3GPP to enable new class of spectrum-efficient multimedia services. Multicast services are expected to serve a diverse user base with varying connectivity and capabilities. We analyze the problem of video error resilience in MBMS services that is critical to maintain consistent quality for end users. The existing error resilience techniques for IP multicasting are not applicable in the MBMS environment. In this paper, we present error resilience techniques that are applicable within the context of the MBMS standard. We propose an Intra Block Refresh method for MBMS services and the results show improved performance. We develop a methodology that can be applied to adapting traditional error resilience tools for the MBMS environment.     

Differential sensitivity of Desi (small‐seeded) and Kabuli (large‐seeded) chickpea genotypes to water stress during seed filling: effects on accumulation of seed reserves and yield

Water stress during the reproductive phase, especially during seed development, is considered detrimental for chickpea yield. In the present study, the relative sensitivity of Desi and Kabuli chickpea types to water stress during seed filling was assessed in terms of effects on quantitative and qualitative aspects of seed yield. Leaves of both types experienced stress injury (evaluated as electrolyte leakage) to the same extent and possessed almost similar values of water potential at the end of 14 days of water stress. The stressed plants of Kabuli type lost more chlorophyll and had less photosynthesis than Desi type. At maturity, Desi type showed more diminution of vegetative dry matter due to stress over control than Kabuli type. On the other hand, Kabuli type showed a proportionally greater reduction in seed weight per plant, average seed weight, average seed size, number of pods (single‐ and double‐seeded) and harvest index. The stressed seeds of Kabuli type showed 48 and 46% reduction over control in starch and protein content compared with 25 and 40%, respectively in Desi type. The accumulation of soluble sugars was relatively greater due to stress in Kabuli (47%) than Desi type (23%). Fat and fiber content declined by 39 and 35% over control in Desi seeds because of stress whereas Kabuli type showed 46 and 67% decreases, respectively. Protein fractions, namely albumins, globulins, glutelins and prolamins, decreased in stressed seeds of Kabuli by 32, 40, 16 and 15% over control relative to 40, 48, 30 and 28%, respectively, in Kabuli type. The activities of sucrose synthase, invertase and soluble starch synthase were inhibited to a higher extent in Kabuli seeds than Desi seeds under stress. Kabuli seeds showed significantly more reduction in the accumulation of amino acids such as phenylalanine + tyrosine, tryptophan, valine, alanine and histidine and minerals (Ca, P, Fe) due to stress compared with Desi type. Copyright © 2006 Society of Chemical Industry     

Decomposition of the metastable beta phase in the all-beta alloy Ti-13V-11Cr-3Al

The phase transformations which occur in the all-β titanium alloy Ti-13V-llCr-3Al at temperatures below ∼ 500°C have been studied by transmission electron microscopy, X-ray diffraction, and electrical resistivity techniques. The decomposition of the metastable β phase has been found to proceed through a transition reaction leading to the formation of two bcc phases rather than through the precipitation of the ω phase as has been previously reported. An interpretation of the observed decomposition sequence, based on thermodynamic reasoning, is presented. The decomposition characteristics of the Ti-13V-llCr-3Al alloy have been compared with those of a Ti-13V-llCr alloy to determine the influence of aluminum on the transformation behavior.     

Atmospheric deposition of polycyclic aromatic hydrocarbons to Atlantic Canada: geographic and temporal distributions and trends 1980-2001

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental contaminants. The semivolatile organic compounds may disperse into the atmosphere by direct input from several sources such as the burning of fossil fuels, from motor vehicle emissions, and forest fires. Once in the atmosphere, they may travel great distances before being deposited to the earth's surface by the scavenging action of rain and snow. Up to 14 PAHs were determined in wet precipitation samples collected monthly from five sites in the four Canadian Atlantic Provinces during 1980-2001. The relatively more volatile PAHs (phenanthrene, fluoranthene, naphthalene, and pyrene) were predominant in the samples. Significant (P < 0.05) spatial variations in the deposition of some PAHs were observed among sites, but there were no consistent geographic patterns. Seasonal patterns were discernible with peak deposition for sigma6&14 PAHs occurring during the colder months of the year (December to March) and coinciding with higher energy consumption for heating and transport. The monthly volume weighed mean concentration for sigma6 PAHs has declined steadily since the mid-1980s at Kejimkujik National Park in southwest Nova Scotia, with a calculated half-life of 6.4 +/- 0.3 years. The maximum annual deposition flux of 20 microg m(-2) yr(-1) reached in 1985 for sigma6 PAHs decreased approximately 1 order of magnitude by the year 2000. The decrease in sigma6&14 PAHs for the region was found to be correlated (P < 0.05) with decreasing sulfate ion concentrations in the precipitation. The implementation of air pollution abatement programs in Canada, the United States, and elsewhere, switching to cleaner sources of energy and improved technology during the pastfew decades is most likely responsible for the observed decline.     

Fetal MEG redistribution by projection operators

The fetal magnetoencephalogram (fMEG) is measured in the presence of large interference from the maternal and fetal magnetocardiograms. This interference can be efficiently attenuated by orthogonal projection of the corresponding spatial vectors. However, the projection operators redistribute the fMEG signal among sensors. Although redistribution can be readily accounted for in the forward solution, visual interpretation of the fMEG signal topography is made difficult. We have devised a general, model-independent method for correction of the redistribution effect that utilizes the assumption that we know in which channels the fMEG should be negligible (such channels are distant from the known fetal head position). In a simplified case where the fMEG can be explained by equivalent current dipoles, the correction can also be obtained from fitting the dipoles to the fMEG signal. The corrected fMEG signal topography then corresponds to the dipole forward solution, but without orthogonal projection. We illustrate the redistribution correction on an example of experimentally measured flash evoked fMEG.     

Open die hot pressing of yttrium iron garnet

A relatively simple and more economical process of open die hot pressing has been employed in preparing high density yttrium iron garnet samples of fine grain size (～ 1–2 μM). The samples have been investigated for the microstructure dependent spinwave line-width (ΔH_k) and FMR line-width (ΔH). The values of ΔH_k and ΔH are in fair agreement with the samples having the same grain size but prepared by the conventional hot pressing using refractory dies.