Generic model control — A case study revisited

The application of the Generic Model Control (GMC) algorithm to the control of an evaporator has been reported recently by Lee et al. (1989). The results of their case study are claimed to demonstrate the superiority of the nonlinear GMC algorithm over conventional techniques including Dynamic Matrix Control. In this note it is shown that for the evaporator example the improved performance arises primarily from the full multivariable and feedforward nature of the control law, rather than from the nonlinear nature of GMC.     

Towards an Environmentally Acceptable Heterogeneous Catalytic Method of Producing Adipic Acid by the Oxidation of Hydrocarbons in Air

A survey is given of the catalytic methods potentially available for the production of adipic acid by the oxidation of readily available hydrocarbon precursors under environmentally benign conditions. Encouraging results are reported using H₂O₂ as oxidant and microporous FeAlPO-5 as catalyst at moderate temperatures.     

Reactions of polyunsaturated fatty alcohols. IX. Molecular-weight distribution of some conjugated soybean vinyl ether homopolymers

The molecular-weight distributions of several conjugated soybean vinyl ether homopolymers were studied by means of the integral fractionation technique. Polymers having number average molecular weights of 2,200, 4,800 and 10,000 prepared with stannic chloride as catalyst as well as a polymer having a molecular weight of 3,400 prepared with boron trifluoride as catalyst were included in the study. The observed distributions for all the polymers were found to approximate the socalled “most probable” distributions expected theoretically for polymers obtained by simple difunctional polymerization. Presented at annual meeting. American Oil Chemists' Society, New Orleans, La., April 20–22, 1959. This is a laboratory of the Northern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Gaseous ammonia as a refining agent for cottonseed oils

In this investigation the application of gaseous ammonia to cottonseed oil refining was explored. The ammonia reacted quantitatively with the free fatty acids in the oil; its solubility in coftonseed oil was determined as a function of pressure. In “degumming” it was more efficient in removing phosphatides than other agents. A reduction in refining loss resulted for oils refined with gaseous ammonia as outlined and compared with the standard AOCS cup loss analysis. However, the oil colors were substantially higher even though the ammonia treated oils were re-refined with caustic solution. Results using cottonseed oil-hexane “miscellas” containing less than 70% oil showed low refining losses, but the colors were estremely high. Above 70% oil content the losses were higher, but the colors were lower. The colors never equalled “standard cup” results. This study was sponsored by the Texas Engineering Experiment Station and the Cotton Research Committee of Texas.     

Removal of fatty soil from glass by surfactants and surfactant-builder compositions

Previous papers have reported radiotagged fatty soil removal from glass either by solvents or by aqueous solutions of sodium tripolyphosphate and other builders. This paper provies soil-removal data for aqueous systems of both pure and built surfactant compositions of the nonionic and alkylbenzene sulfonate types. In general, nonionics are the most effective detergents for the system fatty soil/glass; the 10-mole ethylene oxide adduct products show peak soil-removal. Nonionic surfactants appear most effective for soil removal when used in baths closely approaching their cloud-points. Though modification of hydrophobe by EO addition can affect cloud point, peak soil-removal effectiveness seems to be controlled by hydrophobe selection. Highest soil removal for the alkylbenzene series occurred with the longer alkyl chain (pentadecyl). Admixture of surfactant and sodium tripolyphosphate provided synergistic compositions with certain 10-EO surfactants. Building of anionics markedly improved soil removal over the pure material but seldom exceeded the removal by STP alone. Presented at 34th fall meeting, American Oil Chemists' Society, New York, October 17–19, 1960.     

Water as a Promoter of the Complete Oxidation of Volatile Organic Compounds over Uranium Oxide Catalysts

The effect of water addition on the complete oxidation of benzene and propane VOCs by uranium oxide catalysts has been investigated. Benzene oxidation was studied using a silica supported U₃O₈ catalyst. Complete oxidation is promoted by the addition of 2.6% water compared with the reactivity when no water is added to the reactant feed. Increasing the water concentration to 12.1% resulted in a suppression of oxidation activity. Investigation of propane oxidation using U₃O₈ shows a dramatic promotion of activity. Propane conversion was ca. 50% at 600 °C without added water, whilst it increased to 100% at 400 °C with the addition of 2.6% water. A comparison of oxidation activity has been made with Mn₂O₃, an oxide recognised for complete oxidation. In contrast to the U₃O₈ catalysts the addition of 2.6% water suppresses the activity of Mn₂O₃. In situ powder X-ray diffraction studies showed that the bulk U₃O₈ structure was stable under all the reaction conditions. The origin of the increased activity is not clear but may be due to modification of the catalyst surface and the contribution from new reaction pathways such as steam reforming.     

Reactions of glycerol with poly(ethylene ether carbonate) polyols

Poly(ethylene ether carbonate) polyols can be modified by chemical reactions with polyglycol modifiers under conditions of elevated temperatures and reduced pressures. The modifier becomes chemically incorporated into the modified polyol and is used to control properties such as moisture sensitivity, CO₂ content, T_g, density, etc. in the resultant polyol. However, glycerol cannot be used as a modifier for poly(ethylene ether carbonate) polyols under the same conditions since it reacts with poly(ethylene ether carbonate) polyols by a transesterification reaction sequence to form glyceryl carbonate. As the temperature is increased, the glyceryl carbonate decomposes to yield glycidol and carbon dioxide. These reactions are conveniently followed by ¹³C-NMR. The preparation of glyceryl carbonate by this process has not been previously reported.     

Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite

PMMA, poly(metheylmethacrylate), nanocomposites were made by in situ radical polymerization of MMA, methylmethacrylate, with colloidal silica (ca. 12 nm) to study the effects of nanoscale silica particles on the physical properties and flammability properties of PMMA. Transparent samples resulted and the dispersity of the particles was examined by transmission electron microscopy and atomic force microscopy. The addition of nanosilica particles (13% by mass) did not significantly change the thermal stability, but it made a small improvement in modulus, and it reduced the peak heat release rate roughly 50%. Last, the flame‐retardant mechanism provided by the addition of nanosilica particles in PMMA is discussed. Published 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2072–2078, 2003