Optimization of design and operating parameters in a pilot scale Jameson cell for slime coal cleaning

The Jameson flotation cell has been commonly used to treat a variety of ores (lead, zinc, copper etc.), coal and industrial minerals at commercial scale since 1989. It is especially known to be highly efficient at fine and ultrafine coal recovery. However, although the Jameson cell has quite a simple structure, it may be largely inefficient if the design and operating parameters chosen are not appropriate. In this study, the design and operating parameters of a pilot scale Jameson cell were optimized to obtain a desired metallurgical performance in the slime coal flotation. The optimized design parameters are the nozzle type, the height of the nozzle above the pulp level, the downcomer diameter and the immersion depth of the downcomer. Among the operating parameters optimized are the collector dosage, the frother dosage, the percentage of solids and the froth height. In the optimum conditions, a clean coal with an ash content of 14.90% was obtained from the sample slime having 45.30% ash with a combustible recovery of 74.20%. In addition, a new type nozzle was developed for the Jameson cell, which led to an increase of about 9% in the combustible recovery value.     

Fire detection in video sequences using a generic color model

In this paper, a rule-based generic color model for flame pixel classification is proposed. The proposed algorithm uses YCbCr color space to separate the luminance from the chrominance more effectively than color spaces such as RGB or rgb. The performance of the proposed algorithm is tested on two sets of images, one of which contains fire, the other containing fire-like regions. The proposed method achieves up to 99% fire detection rate. The results are compared with two other methods in the literature and the proposed method is shown to have both a higher detection rate and a lower false alarm rate. Furthermore the proposed color model can be used for real-time fire detection in color video sequences, and we also present results for segmentation of fire in video using only the color model proposed in this paper.     

Current status of kinematically complete studies of basic fragmentation processes in atomic systems

Recent developments on kinematically complete experiments on basic atomic fragmentation processes are reviewed. Comparisons between theoretical and experimental fully differential cross sections for single ionization of light atoms by charged particle impact are analyzed. Furthermore, a method developed very recently, four-particle Dalitz plots, is discussed in context of double ionization. The extraordinary power of these plots is their capability to provide a comprehensive picture of the momentum exchange between all four final-state particles in a single spectrum.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Physicochemical,mineralogy,and thermo-kinetic characterisation of newly discovered Nigerian coals under pyrolysis and combustion conditions

In this study,the physicochemical,microstructural,mineralogical,thermal,and kinetic properties of three newly discovered coals from Akunza (AKZ),Ome (OME),and S...     

A new process for the production of medium quality fuels from coal washing plant coarse tailings

Turkey’s proven bituminous coal reserve is very low, and it is about 1.3 billion tons. The annual bituminous coal production is 2 million tons, and the annual import amount is 30 million tons. Turkey is a foreign-dependent country in its bituminous coal requirement. In this respect, the highest recycling of coarse and fine plant tailings is important in respect of the efficient use of limited natural resources. In this study, a novel process was developed for medium quality fuel production from coarse plant tailings. By the developed process, from coarse plant tailings with an ash content of 78.21%, medium quality fuel was produced which has ash content between 29.20 and 44.38% and which has economic value in the current market. The upper calorific values of these fuels change between 5620 and 4350 kcal/kg. The developed process basically includes the stages of micronized grinding and then froth flotation applied to the obtained powder tailing material.     

Multi carrier energy systems and energy hubs: Comprehensive review,survey and recommendations

In this paper, the multi carrier energy (MCE) systems are reviewed from different point of views including mathematical models, integrated components and technologies, uncertainty management, planning objectives, environmental pollution, resilience, and robustness. The basic of MCE systems is formed by combination of cooling, heating and power (CCHP). The natural gas and electricity are the main inputs to MCE systems and the cooling, heating, and electricity are the common outputs. The regular energy converters in the MCE systems are combined heat and power (CHP), gas boiler, absorption-electrical chillers, power to gas (P2G) and fuel-cell. The generic energy storages are electrical, heating, cooling, hydrogen, carbon dioxide (CO₂) and hydro systems.     

Static and dynamic wind turbine simulator using a converter controlled dc motor

This paper describes a new wind turbine simulator for dynamic conditions. The authors have developed an experimental platform to simulate the static and dynamic characteristics of real wind energy conversion system. This system consists of a 3 kW dc motor, which drives a synchronous generator. The converter is a 3 kW single-phase half-controlled converter. MATLAB/Simulink real time control software interfaced to I/O board and a converter controlled dc motor are used instead of a real wind turbine. A MATLAB/Simulink model is developed that obtains wind profiles and, by applying real wind turbine characteristics in dynamics and rotational speed of dc motor, calculates the command shaft torque of a real wind turbine. Based on the comparison between calculated torques with command one, the shaft torque of dc motor is regulated accordingly by controlling armature current demand of a single-phase half-controlled ac–dc converter. Simulation and experimental results confirm the effectiveness of proposed wind turbine simulator in emulating and therefore evaluating various turbines under a wide variety of wind conditions.     

Incremental gravitational search algorithm for high-dimensional benchmark functions

Neural Computing and Applications - In this study, gravitational search algorithm (GSA), which is a powerful optimization algorithm developed in recent years and based on physics, is improved by...