Preparation of hydrophobic polymer particles by radical polymerization and subsequent modification into magnetically doped particles

The application potential of hydrophobic polymer is numerous. Lauryl methacrylate (LMA) having long alkyl chain is a commercially available hydrophobic monomer. In this investigation, poly‐LMA (PLMA) latex particles were prepared by suspension polymerization in aqueous media using 2,2′‐azobis(isobutyronitrile) (AIBN) in presence of poly(vinyl alcohol) (PVA) as steric stabilizer. The preparation kinetics was studied in detail in terms of percentage yield and particle size variation. Low glass transition temperature (～ ?65°C) associated with high flexibility did not allow electron micrographic observation though ¹H‐NMR and particle size measurement confirmed the formation of PLMA latex. To improve the glass transition temperature, aqueous emulsion copolymerization of LMA with methyl methacrylate (MMA) was carried out. The solubility of LMA was improved by adding ethanol to the aqueous phase. Two types of polymeric stabilizers, PVA and poly(vinyl pyrrolidone) (PVP) were used to stabilize the colloidal particles. The nature of the stabilizer affected both morphology and final rate of polymerization. The hydrophobic P(LMA‐MMA) copolymer particles were subsequently modified by nanosized magnetic (Fe₃O₄) particles by two different methods. The in situ formation of Fe₃O₄ particles in presence of P(LMA‐MMA) was found to be suitable for the preparation of magnetic latex particles. Scanning electron microscope (SEM), FTIR, transmission electron microscope (TEM), X‐ray diffraction (XRD) and energy‐dispersive X‐ray spectroscopy (EDX) were used for the characterization of magnetically doped particles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A Mathematical Model for Potassium Sorbate Diffusion Through Whey Protein Films

A mathematical model was constructed and solved to quantitatively describe the dynamic behavior of the potassium sorbate diffusion through whey protein films. The model results were compared with the experimental data of the potassium sorbate diffusion through whey protein films, and excellent agreements between the experimental data and the model results are observed. The experimental data for potassium sorbate diffusion through whey protein films were used for mathematical model of potassium sorbate diffusion through whey protein films and the determination of both potassium sorbate and solvent diffusion coefficients. The diffusivities of potassium sorbate at 25°C ranged from 4.12 to 9.34 × 10^?11 m²/s, while that of the solvent was between 1.38 and 8.74 × 10^?10 m²/s, depending on the film composition.     

Grain Drying in a Paraboloid-Based Spouted Bed with and without Draft Tube

In this study, grain drying in a spherical-based spouted bed (SBSB), a cone-based spouted bed (CBSB), and a paraboloid-based spouted bed (PBSB) with and without draft tube was investigated. Spouted-bed bases with the same volume in different shapes—spherical, cone, and paraboloid—were used for the drying experiments to investigate the effect of the spouted-bed base shape on drying. The drying experiments were carried out with perforated and solid draft tubes. The effects of the distance between the gas inlet nozzle and the bottom of the draft tube (entrainment zone height) and the draft tube diameter as geometric parameters on drying were also investigated. It was seen that the geometrical shape of the contactor base influenced the drying time. The highest drying rate was achieved for drying in a paraboloid-based spouted bed. The results also showed that using a draft tube caused a significant increase in drying time. Because the perforated draft tube allows a higher gas flow rate through the annulus, it decreases the drying time when compared with the solid draft tube. Drying time decreased slightly with the decreasing height of the entrainment zone but draft tube diameter did not have a considerable effect on drying.     

Origin of anomalous octahedral distortions and collapse of magnetic ordering in Nd1−xSrxFeO3 (0≤x≤0.5)

The effects of strontium doping on the structural properties and magnetic ordering of Nd_1?xSr_xFeO₃ orthoferrite system have been studied by employing macroscopic and microscopic structural techniques like X-ray diffraction, scanning electron microscopy and ⁵⁷Fe Mössbauer spectroscopy. X-ray diffraction confirmed that single phase materials have been synthesized. It has been observed that orthorhombic distortion, density and porosity have decreased; whereas, grain size, tolerance factor and symmetry have increased with increase in the strontium concentration. Mössbauer results showed an increase in the Fe⁴⁺/Fe³⁺ ratio, sagging and local octahedral distortions while decrease in the magnetic ordering with increase in the strontium content. The origin behind anomalous octahedral distortions in this system has been attributed to the decrease in the oxidation state and mismatch in the ionic radii of A-site cations and increase in the concentration of Fe⁴⁺, due to Sr²⁺ doping at Nd³⁺ sites. The collapse of magnetic ordering has been ascribed to the weakening of super-exchange interactions, dilution of strong long range magnetic sub-lattice of high spin Fe³⁺ (five unpaired electrons) by relatively lower spin of high spin Fe⁴⁺ (four unpaired electrons) and increase in the spin–spin relaxation frequency.     

Novel Green Liquor Pretreatment of Loblolly Pine Chips to Facilitate Enzymatic Hydrolysis into Fermentable Sugars for Ethanol Production

Abstract

Softwood species generally have been found very recalcitrant to enzymatic hydrolysis of the carbohydrate fractions to monomeric sugars. To solve this problem, loblolly pine chips were pretreated with green liquor at 12–20% Total Titratable Alkali (TTA) (as Na₂O on wood) at 170°C for 800 H-factor. The yield of resulting pulp was 76.5–78.6% and the lignin content decreased from 29.2 to 20.2–22.4% and the total polysaccharide decreased from 62.6 to 53.8–55.0%, all based on the weight of original wood. When the pulp was subjected to enzymatic hydrolysis using 40 Filter Paper Unit (FPU)/g pulp, only 41% of the polysaccharides in wood were converted to monomeric sugars. This conversion figure is much lower than that of mixed southern hardwoods (80%) treated under similar conditions. If the green liquor treated pulp was further subjected to either oxygen delignification or mechanical refining prior to the enzymatic hydrolysis, the conversion rate increased to around 55% and 60%, respectively. Furthermore, combination of oxygen delignification and refining further increased the total sugar conversion to 78% of the total sugar in wood, approximately equal to that of the mixed southern hardwoods.     

Improving the scalability of a symmetric iterative eigensolver for multi‐core platforms

We describe an efficient and scalable symmetric iterative eigensolver developed for distributed memory multi‐core platforms. We achieve over 80% parallel efficiency by major reductions in communication overheads for the sparse matrix‐vector multiplication and basis orthogonalization tasks. We show that the scalability of the solver is significantly improved compared to an earlier version, after we carefully reorganize the computational tasks and map them to processing units in a way that exploits the network topology. We discuss the advantage of using a hybrid OpenMP/MPI programming model to implement such a solver. We also present strategies for hiding communication on a multi‐core platform. We demonstrate the effectiveness of these techniques by reporting the performance improvements achieved when we apply our solver to large‐scale eigenvalue problems arising in nuclear structure calculations. Because sparse matrix‐vector multiplication and inner product computation constitute the main kernels in most iterative methods, our ideas are applicable in general to the solution of problems involving large‐scale symmetric sparse matrices with irregular sparsity patterns. Copyright © 2013 John Wiley & Sons, Ltd.     

Cost‐effective manufacturing process for the development of automotive from energy efficient composite materials and sandwich structures

The advanced composite materials are increasingly being used in the automotives for their ultralight physical properties and super strong mechanical properties. This research examines the cost‐effective single‐step liquid resin infusion manufacturing process for developing all composite car body as the generally used sheet molding compound manufacturing process is highly capital intensive. Three different scaled down models of the Eco car were developed focusing on minimal weight and air drag coupled with aesthetics. Structural design and analysis was carried out using the Pro/E and Ansys tools. The Pro‐E model was scaled up to generate computer‐aided drafting drawings for tool development. Different stations were marked on the model and sliced virtually for development of pattern. Moreover, the mold was manufactured from carbon and glass/polyester composites for prototype manufacturing of the car body. This involved manual placement of desired number of carbon layers as preform on female side of the mold. The vacuum sucked the resin through a number of carefully selected entry ports which ensured effective resin distribution and impregnation. Polycarbonate wind shield was thermoformed in the convection oven according to streamlined geometry of car body and hinged. The car body was integrated with the compatible floor panels and accessories. The crumble zone shock absorber in the bumper was manufactured using successive layers of nomax honeycomb and polyvinyl chloride rigid foam to dampen the accidental shock. The car performed remarkably well in the Eco marathon race held at Malaysia, 35:97–104, 2014. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Development of a New Extraction Method for Heterocyclic Aromatic Amines Determination in Cooked Meatballs

Heterocyclic aromatic amines (HCAs) are mutagenic and carcinogenic compounds that are produced in meats cooked at high temperature. In this study, 2-amino-3-methylimidazo[4,5-f]quinoline (IQ), 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx), 2-amino-3,4,8-trimethylimidazo[4,5-f]quinoxaline (4,8-DiMeIQx), 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP), 9H-pyrido[3,4-b]indole (norharman), and 1-methyl-9H-pyrido[3,4-b]indole (harman) were studied. A new extraction method was developed for the determination of heterocyclic amines with high-performance liquid chromatography (HPLC). Linearity for each HCA was observed with a high regression coefficient (r?=?0.9999, P?<?0.01 for IQ; r?=?0.9990, P?<?0.01 for MeIQx; r?=?0.9989, P?<?0.01 for 4,8-DiMeIQx; r?=?0.9934, P?<?0.05 for PhIP; r?=?1.000, P?<?0.01 for norharman; r?=?0.9991, P?<?0.01 for harman). Limits of detection for various HCAs were found between 0.04 and 1.40 ng/g. Limits of quantification were found in the range of 0.13–4.40 ng/g. Recovery rates varied from 68.9 % to 87.8 %. This method was compared with two different common HCA extraction methods in literature. The optimized new extraction method and the other two methods were used for the determination of HCAs in ten different cooked meatball samples. Sample extraction procedures of HCAs were investigated in more detail, and a rapid, accurate, precise, and reliable extraction method was developed.