智能打壳装置

在一台HAL 2 3 0电解槽上安装了 5个带有节能系统 (EnergySavingSystem)的汽缸和一个可用于快速测试寿命的“虚拟”ESS汽缸。测试的目的是使用ESS系统在正常操作中估计空气节省量和证明包括ESS系统在内的打壳装置的预期寿命周期能达到 8年。测试表明ESS系统的预期寿命超过 8年 ,与传统系统相比 ,可节省 5 9%的空气。如果全部使用该系统 ,可节省 65 %的能量。     

Defect classification using a new feature for pulsed eddy current sensors

The objective of this study is to identify defects such as surface cracks, subsurface defects and metal losses using feature based pulsed eddy current sensors. A new feature, termed as the rising point, related to the propagation time of electromagnetic waves in metallic targets is proposed for defect classification. Experimental studies of the validation, robustness of the new feature of rising time are reported. In addition to other features, defects can be detected and quantified robustly and lift-off can also be derived from the rising time. Conclusion and further work are derived on the basis of the findings.     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

On the role of hydrophilicity and hydrophobicity in aqueous heterophase polymerization

This paper reports on experimental results of aqueous heterophase polymerizations with monomers of quite different solubility in water ranging from the water-soluble 2-hydroxyethyl methacrylate to lauryl methacrylate with solubility in water of only about 10⁻⁴ mM. A calorimetric study revealed the strong influence of both the hydrophilicity of the monomer and the stirrer speed on the rate of polymerization in the absence of surfactants. In order to obtain maximum latex yield and high efficiency (which is a measure considering colloidal properties, polymerization recipe, and polymerization parameters) the initiator-surfactant combination must be properly chosen in dependence on the hydrophilicity of the monomer. Results are presented for sodium alkyl sulfates or disodium-N-stearoyl-l-glutamate as surfactant and potassium peroxodisulfate, or poly(ethylene glycol)-azo- compounds, or 2,2′-azobis(N-2′-methylpropanoyl-2-amino-alkyl-1)-sulfonates as initiators.     

Squaring down of general MIMO systems to invertible uniform rank systems via pre- and/or post-compensators

Pre- and/or post-compensators are designed to square down a general MIMO system to a uniform rank system, the structure of which is almost similar to a SISO system. The method of squaring down either does not change the finite zero structure of the given MIMO system or simply adds additional finite zeros in the left half s-plane. The significance of such a squaring down lies in the simplicity of the structure of a uniform rank system lending itself for easy analysis and control design.     

Single mask fabrication process for movable MEMS devices

The current work reports on the realization of movable micromachining devices using self-aligned single-mask fabrication process. Only dry etching process utilizing inductively coupled plasma reactive ion etching was used to release 3D micro structures from single crystal silicon substrate. No wet etching process is required to release the structures as is the case with silicon on insulator (SOI) wafers. Also the developed process does not require an SOI substrate and accordingly dispensing with the application of a wet etching step, thus yielding uniform structures without stiction. The optimized process was applied to realize thermally actuated microgrippers. The article presents the development of the fabrication process and demonstrates the operation of the fabricated device. The optimized process provides an avenue for low cost fabrication of movable micromachining devices without the use of complicated wet etching steps typically associated with SOI substrates.     

Towards a distributed multi-agent framework for shared resources scheduling

Nowadays, manufacturers have to share some of their resources with partners due to the competitive economic environment. The management of the availability periods of shared resources causes a problem because it is achieved by the scheduling systems, which assume a local environment where all resources are on the same site. Therefore, distributed scheduling with shared resources is an important research topic. In this communication, we introduce the architecture and behaviour of DSCEP framework (Distributed, Supervisor, Customer, Environment, and Producer) under shared resources situation with disturbances. We are using a simple example of manufacturing system to illustrate the ability of DSCEP framework to solve the shared resources scheduling problem in complex systems.     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

Polymer waste recycling over “used” catalysts

Catalytic degradation of high-density polyethylene (HDPE) was carried out under nitrogen using a laboratory fluidised bed reactor operating at 360 °C with catalyst to polymer feed ratio of 2:1 and at 450 °C with catalyst to polymer feed ratio of 6:1 under atmospheric pressure. The catalysts used in this study were ZSM-5, US-Y, ASA, fresh FCC (fluid catalytic cracking) commercial catalyst (Cat-A) and equilibrium FCC catalysts with different levels of metal poisoning were studied. The initial results for polymer degradation at 360 °C (catalyst to polymer ratio of 2:1) in a fluidised bed reactor in terms of the yield of volatile hydrocarbon products were: model catalysts>commercial FCC catalyst>E-Cats. However, when the process conditions more closely resembled to FCC conditions, the fresh commercial FCC catalyst was more favourable in terms of the yield of volatile hydrocarbon products. The degradation of HDPE over E-Cats although reduced was similar to ASA in product selectivity and yield, and the level of metal contamination did not affect the product stream generated. A simple economic evaluation of polymer recycling process is reported showing that a catalytic system based on E-Cats appears comparable in costs to a commercial thermal cracking plant.     

O3/H2O2 Treatment of Methyl-terf-Butyl Ether in Contaminated Waters: Effect of Background COD on the O3-Dose

The destruction of methyl-tert-butyl ether (MTBE) in contaminated waters by O₃/H₂0₂ process was studied and the influence background COD, alkalinity, and hydrogen peroxide and MTBE concentrations on process treatment efficiency and ozone dosage was investigated. The treatment efficiency was evaluated by an Efficiency Index, which is based on electrical energy requirement for ozone production. It was found that the treatment efficiency decreases linearly with increasing concentrations of MTBE at constant background COD and with background COD at constant MTBE concentration. A simplified kinetic scheme was presented to account for these observations.