Evaporation from Lake Superior: 1. Physical controls and processes

The surface energy balance of Lake Superior was measured using the eddy covariance method at a remote, offshore site at 0.5-h intervals from June 2008 through November 2010. Pronounced seasonal patterns in the surface energy balance were observed, with a five-month delay between maximum summer net radiation and maximum winter latent and sensible heat fluxes. Late season (winter) evaporation and sensible heat losses from the lake typically occurred in two- to three-day-long events, and were associated with significant release of stored heat from the lake. The majority of the evaporative heat loss (70-88%) and sensible heat loss (97-99%) occurred between October and March, with 464 mm (2008-2009) and 645 mm (2009-2010) of evaporative water loss occurring over the water year starting October 1. Evaporation was proportional to the horizontal wind speed, inversely proportional to the ambient vapor pressure, and was well described by the ratio of wind speed to vapor pressure. This ratio remained relatively constant between the two water years, so the differences in evaporative water loss between years were largely associated with differences in lake surface conditions (e.g. water temperature, ice cover, and ice duration). Since late-season water temperature decline is driven by evaporative and sensible heat loss, the potential for a negative feedback mechanism between evaporation and ice cover is discussed.     

Topology and thickness optimization of laminated composites including manufacturing constraints

This paper presents a gradient based optimization method for large-scale topology and thickness optimization of fiber reinforced monolithic laminated composite structures including certain manufacturing constraints to attain industrial relevance. This facilitates application of predefined fiber mats and reduces the risk of failure such as delamination and matrix cracking problems. The method concerns simultaneous determination of the optimum thickness and fiber orientation throughout a laminated structure with fixed outer geometry. The laminate thickness may vary as an integer number of plies, and possible fiber orientations are limited to a finite set. The conceptual combinatorial problem is relaxed to a continuous problem and solved on basis of interpolation schemes with penalization through the so-called Discrete Material Optimization method, explicitly including manufacturing constraints as a large number of sparse linear constraints. The methodology is demonstrated on several numerical examples.     

Grid resource brokering algorithms enabling advance reservations and resource selection based on performance predictions

We present algorithms, methods, and software for a Grid resource manager, that performs resource brokering and job scheduling in production Grids. This decentralized broker selects computational resources based on actual job requirements, job characteristics, and information provided by the resources, with the aim to minimize the total time to delivery for the individual application. The total time to delivery includes the time for program execution, batch queue waiting, and transfer of executable and input/output data to and from the resource. The main features of the resource broker include two alternative approaches to advance reservations, resource selection algorithms based on computer benchmark results and network performance predictions, and a basic adaptation facility. The broker is implemented as a built-in component of a job submission client for the NorduGrid/ARC middleware.     

Optimally Adaptive Integration of Univariate Lipschitz Functions

We consider the problem of approximately integrating a Lipschitz function f (with a known Lipschitz constant) over an interval. The goal is to achieve an additive error of at most ε using as few samples of f as possible. We use the adaptive framework: on all problem instances an adaptive algorithm should perform almost as well as the best possible algorithm tuned for the particular problem instance. We distinguish between and , the performances of the best possible deterministic and randomized algorithms, respectively. We give a deterministic algorithm that uses samples and show that an asymptotically better algorithm is impossible. However, any deterministic algorithm requires samples on some problem instance. By combining a deterministic adaptive algorithm and Monte Carlo sampling with variance reduction, we give an algorithm that uses at most samples. We also show that any algorithm requires samples in expectation on some problem instance (f,ε), which proves that our algorithm is optimal.     

Subquadratic Algorithms for 3SUM

We obtain subquadratic algorithms for 3SUM on integers and rationals in several models. On a standard word RAM with w-bit words, we obtain a running time of . In the circuit RAM with one nonstandard AC ⁰ operation, we obtain . In external memory, we achieve O(n ²/(MB)), even under the standard assumption of data indivisibility. Cache-obliviously, we obtain a running time of . In all cases, our speedup is almost quadratic in the “parallelism” the model can afford, which may be the best possible. Our algorithms are Las Vegas randomized; time bounds hold in expectation, and in most cases, with high probability.     

Learning to Locate Informative Features for Visual Identification

Object identification is a specialized type of recognition in which the category (e.g. cars) is known and the goal is to recognize an object’s exact identity (e.g. Bob’s BMW). Two special challenges characterize object identification. First, inter-object variation is often small (many cars look alike) and may be dwarfed by illumination or pose changes. Second, there may be many different instances of the category but few or just one positive “training” examples per object instance. Because variation among object instances may be small, a solution must locate possibly subtle object-specific salient features, like a door handle, while avoiding distracting ones such as specular highlights. With just one training example per object instance, however, standard modeling and feature selection techniques cannot be used. We describe an on-line algorithm that takes one image from a known category and builds an efficient “same” versus “different” classification cascade by predicting the most discriminative features for that object instance. Our method not only estimates the saliency and scoring function for each candidate feature, but also models the dependency between features, building an ordered sequence of discriminative features specific to the given image. Learned stopping thresholds make the identifier very efficient. To make this possible, category-specific characteristics are learned automatically in an off-line training procedure from labeled image pairs of the category. Our method, using the same algorithm for both cars and faces, outperforms a wide variety of other methods.     

Neck postures in air traffic controllers with and without neck/shoulder disorders

Prolonged computer work with an extended neck is commonly believed to be associated with an increased risk of neck-shoulder disorders. The aim of this study was to compare neck postures during computer work between female cases with neck-shoulder disorders, and healthy referents. Based on physical examinations, 13 cases and 11 referents were selected among 70 female air traffic controllers with the same computer-based work tasks and identical workstations. Postures and movements were measured by inclinometers, placed on the forehead and upper back (C7/Th1) during authentic air traffic control. A recently developed method was applied to assess flexion/extension in the neck, calculated as the difference between head and upper back flexion/extension. Results: cases and referents did not differ significantly in neck posture (median neck flexion/extension: -10 degrees vs. -9 degrees ; p=0.9). Hence, the belief that neck extension posture is associated with neck-shoulder disorders in computer work is not supported by the present data.     

Web‐Like Interconnected Carbon Networks from NaCl‐Assisted Pyrolysis of ZIF‐8 for Highly Efficient Oxygen Reduction Catalysis

The oxygen reduction reaction (ORR) is under intense research due to its significance in energy storage and conversion processes. Recent studies show that interconnected and hierarchically porous structures can further enhance ORR kinetics as well as catalyst durability, but their preparation can be quite time and/or chemical consuming. Here, a simple approach is reported to prepare such complex structures by pyrolyzing composites containing NaCl and ZIF‐8. The templating effect of molten NaCl connects ZIF‐8 particles into web‐like carbon networks. During ORR activity measurements, it achieves a 0.964 V onset potential and a 38 mV dec^?1 Tafel slope, which are comparable to those of the benchmark Pt/C (0.979 V and 40 mV dec^?1). Due to the metal‐free feature, this catalyst exhibits a 16 mV shift in half‐wave potential after a 10 000‐cycle durability test, which is only 60% of that of Pt/C. The catalyst is also tested in Zn–air batteries and the assemblies are able to work at above 1.2 V for 140 h, which triples the life held by those with Pt/C. This study demonstrates a facile strategy to prepare metal‐free ORR catalysts with interconnectivity and hierarchical porosity, and proves their great potentials in ORR catalysis and Zn–air batteries.     

Quantum Inspired Broadband Photonic Absorber: Potential Application as Solar Sail along with Mobility Analysis

Electromagnetic wideband absorption is still perceived as a critical and formidable challenge to address with an unambiguous photonic absorber. Subwavelength metamaterial (MM) unit cells with unique and controlled features have recently gained considerable interest. However, meta-atoms, generated using a quantum-inspired pattern distribution, are underwhelming in existing literature to design photonic absorbers and their potential application to manufacture solar sails is still quite uncommon. In this article, to create a flexible, polarization-insensitive, ultrathin, and broadband MM absorber, quantum interference pattern-inspired design is utilized. Herein, a novel approach to fabricating solar sails for the space exploration incorporates the proposed broadband photonic absorber rather than conventional reflectors. The quantum-inspired meta-absorber (QIMA) exhibits an absorption of over 91% for the visible domain, i.e., 380–800 nm under a conventional plane-polarized source. It is shown in the study that broadband absorbers are almost equivalent to excellent reflectors to design the solar sails in terms of the time-averaged force calculated by utilizing the Maxwell stress tensor method. Thus, the QIMA has the potential to be a viable alternative to reflectors in the design of futuristic solar sails for space exploration. The interference theory model is also utilized to assure the dependability of calculated data, and additionally, the standard AM1.5 solar spectrum is utilized to demonstrate the QIMA's solar-harvesting potentiality.