Ambient‐light sensor system with wide dynamic range enhanced by adaptive sensitivity control

Abstract— A new digital ambient‐light sensor system is presented which employs two linear light sensors with different sensitivities and automatically adjusts the sensitivity based on the illumination condition. The adaptation mechanism allows a very wide range of light intensity to be detected, and the input dynamic range of the system is substantially improved from 22.5 to 45.1 dB. The proposed method does not require any additional precision bits for output data. Due to the small number of the output bits and the simple conversion process, the system can be easily integrated on the display panel.     

Touch‐screen panel integrated into 12.1‐in. a‐Si:H TFT‐LCD

Abstract— A touch‐screen‐panel (TSP) embedded 12.1‐in. LCD employing a standard existing a‐Si:H TFT‐LCD process has been successfully developed. Compared with conventional external touch‐screen panels, which use additional components to detect touch events, the new internal TSP exhibits a clearer image and improved touch feeling, as well as increased sensing speed using discrete sensing lines to enable higher‐speed sensing functions including handwriting. The new internal digital switching TSP can be fabricated with low cost because it does not require any additional process steps compared to a standard a‐Si:H TFT‐LCD.     

Electron‐beam deposition of MgO on plastic substrate and manufacturing flexible flat fluorescent lamp

Abstract— A flexible fluorescent lamp that utilizes the same plasma discharge mode as in PDPs has been manufactured. The structure of the flexible lamp is simple and easy to manufacture. All‐plastic materials including plastic substrates, barrier ribs (spacers), and sealants for low‐temperature manufacturing processing have been adopted except for the phosphor and MgO thin film. The MgO thin films were coated on the plastic substrates as a protection layer against the plasma discharge. The adhesion and biaxial texture of MgO thin film deposited on the plastic substrates, poly‐ethyle‐nenaphthalate (PEN) and polycarbonate (PC), at low temperature (100–180°C) has been characterized. The MgO film on PEN shows good adhesion under a repeated bending test. The manufactured flexible lamp consists of two plastic substrates of about 3 in. on the diagonal, barrier rib (spacer), and external ITO electrodes. The Ne‐Xe (5%) gas mixture at 100–200 Torr was used for the discharge gas. A maximum surface luminance of about 100 cd/m² was achieved for a 1 ‐kHz AC pulse.     

Thin‐film barriers using transparent conducting oxides for organic light‐emitting diodes

Abstract— This study covers thin‐film barriers using inorganic barriers of transparent conducting oxides (TCOs) such as zinc oxide (ZnO) and indium tin oxide (ITO). The TCOs were fabricated using a sputtering method with a process gas of pure argon at room temperature. ITO showed better properties as a barrier than the ZnO and exhibited the electronic performance necessary to perform additional functions. The ITO has superior barrier performance because it has a lower crack density due to its partial amorphous phase. For organic/inorganic multilayer barriers, the organic underlayer decreased the water‐vapor transmission rate (WVTR) more than the organic upper layer, indicating that the planarization effect was important in reducing the WVTRs. The results of this organic/ITO multilayer barrier study are expected to be useful in finding a practical solution to OLED encapsulation.     

Depth-Fused 3D Imagery on an Immaterial Display

We present an immaterial display that uses a generalized form of depth-fused 3D (DFD) rendering to create unencumbered 3D visuals. To accomplish this result, we demonstrate a DFD display simulator that extends the established depth-fused 3D principle by using screens in arbitrary configurations and from arbitrary viewpoints. The feasibility of the generalized DFD effect is established with a user study using the simulator. Based on these results, we developed a prototype display using one or two immaterial screens to create an unencumbered 3D visual that users can penetrate, examining the potential for direct walk-through and reach-through manipulation of the 3D scene. We evaluate the prototype system in formative and summative user studies and report the tolerance thresholds discovered for both tracking and projector errors.     

Multithreaded Hybrid Feature Tracking for Markerless Augmented Reality

We describe a novel markerless camera tracking approach and user interaction methodology for augmented reality (AR) on unprepared tabletop environments. We propose a real-time system architecture that combines two types of feature tracking. Distinctive image features of the scene are detected and tracked frame-to-frame by computing optical flow. In order to achieve real-time performance, multiple operations are processed in a synchronized multi-threaded manner: capturing a video frame, tracking features using optical flow, detecting distinctive invariant features, and rendering an output frame. We also introduce user interaction methodology for establishing a global coordinate system and for placing virtual objects in the AR environment by tracking a user's outstretched hand and estimating a camera pose relative to it. We evaluate the speed and accuracy of our hybrid feature tracking approach, and demonstrate a proof-of-concept application for enabling AR in unprepared tabletop environments, using bare hands for interaction.     

Random Accessible Mesh Compression Using Mesh Chartification

Previous mesh compression techniques provide decent properties such as high compression ratio, progressive decoding, and out-of-core processing. However, only a few of them supports the random accessibility in decoding, which enables the details of any specific part to be available without decoding other parts. This paper proposes an effective framework for the random accessibility of mesh compression. The key component of the framework is a wire-net mesh constructed from a chartification of the given mesh. Charts are compressed separately for random access to mesh parts and a wire-net mesh provides an indexing and stitching structure for the compressed charts. Experimental results show that random accessibility can be achieved with competent compression ratio, which is only a little worse than single-rate and comparable to progressive encoding. To demonstrate the merits of the framework, we apply it to process huge meshes in an out-of-core manner, such as out-of-core rendering and out-of-core editing.     

EvoOligo: Oligonucleotide Probe Design With Multiobjective Evolutionary Algorithms

Probe design is one of the most important tasks in successful deoxyribonucleic acid microarray experiments. We propose a multiobjective evolutionary optimization method for oligonucleotide probe design based on the multiobjective nature of the probe design problem. The proposed multiobjective evolutionary approach has several distinguished features, compared with previous methods. First, the evolutionary approach can find better probe sets than existing simple filtering methods with fixed threshold values. Second, the multiobjective approach can easily incorporate the user's custom criteria or change the existing criteria. Third, our approach tries to optimize the combination of probes for the given set of genes, in contrast to other tools that independently search each gene for qualifying probes. Lastly, the multiobjective optimization method provides various sets of probe combinations, among which the user can choose, depending on the target application. The proposed method is implemented as a platform called EvoOligo and is available for service on the Web. We test the performance of EvoOligo by designing probe sets for 19 types of Human Papillomavirus and 52 genes in the Arabidopsis Calmodulin multigene family. The design results from EvoOligo are proven to be superior to those from well-known existing probe design tools, such as OligoArray and OligoWiz.     

Incorporating affective customer needs for luxuriousness into product design attributes

In a highly competitive market, customers' product affection is a critical factor to product success. However, understanding customers' affective needs is difficult to grasp; product design practitioners often misunderstand what customers really want. In this study we report our experience in developing and using an affective design framework that identified critical affective features customers have on products and are systematically incorporated into product design attributes. To identify key affective features such as luxuriousness, we utilized the Kansei engineering methodology. This approach consists of three steps: (1) selecting related affective features and product design attributes through a comprehensive literature survey, expert panel opinion, and focus group interviews; (2) conducting evaluation experiments; and (3) developing Kansei models using multivariate statistical analysis and analyzing critical product design attributes. To demonstrate applicability of the proposed affective design framework, 30 customers and 30 product design practitioners participated in an evaluation experiment for car crash pads, and 44 customers and 20 designers participated in an evaluation experiment for two interior room products (wallpapers and flooring materials). The evaluation experiments were conducted via systematically developed questionnaires consisting of a 7‐point semantic differential scale and a 100‐point magnitude estimation scale. The results of the experiments were analyzed using principal component regression and quantification theory type I method. Using the analyzed survey data, the relationship between luxuriousness and related affective features and product design attributes were identified. This relationship indicated that there was a significant difference in the perception of luxuriousness between customers and designers. Consequently, it is expected that the results of this study could provide a foundation for developing affective products. © 2009 Wiley Periodicals, Inc.     

A multi-functional platform for implementing intelligent and ubiquitous functions of smart substations under SCADA

For more efficient and economical management of substations under SCADA (Supervisory Control and Data Acquisition) systems, the concept of a smart substation has been introduced using intelligent and ubiquitous IT (Information Technology) techniques. A multi-functional platform needs to perform more intelligent and ubiquitous functions of smart substation effectively. In this paper, we propose a multi-functional platform to implement smart substations effectively. A prototype hardware, functions and communication interfaces on an embedded platform are introduced. Also, we suggest operating system architecture for smart substations.