The Role of Oncostatin M and Its Receptor Complexes in Cardiomyocyte Protection,Regeneration, and Failure

Oncostatin M (OSM), a member of the interleukin-6 family, functions as a major mediator of cardiomyocyte remodeling under pathological conditions. Its involvement in a variety of human cardiac diseases such as aortic stenosis, myocardial infarction, myocarditis, cardiac sarcoidosis, and various cardiomyopathies make the OSM receptor (OSMR) signaling cascades a promising therapeutic target. However, the development of pharmacological treatment strategies is highly challenging for many reasons. In mouse models of heart disease, OSM elicits opposing effects via activation of the type II receptor complex (OSMR/gp130). Short-term activation of OSMR/gp130 protects the heart after acute injury, whereas chronic activation promotes the development of heart failure. Furthermore, OSM has the ability to integrate signals from unrelated receptors that enhance fetal remodeling (dedifferentiation) of adult cardiomyocytes. Because OSM strongly stimulates the production and secretion of extracellular proteins, it is likely to exert systemic effects, which in turn, could influence cardiac remodeling. Compared with the mouse, the complexity of OSM signaling is even greater in humans because this cytokine also activates the type I leukemia inhibitory factor receptor complex (LIFR/gp130). In this article, we provide an overview of OSM-induced cardiomyocyte remodeling and discuss the consequences of OSMR/gp130 and LIFR/gp130 activation under acute and chronic conditions.     

Decreasing Filter Cake Resistance by Using Packing Structures

Packed beds used in absorption columns are evaluated to determine whether they can also be beneficial for cake‐forming filtrations. To assess this, model systems are characterized and separated by using a dead‐end filter cell. Filtrations are conducted with different packings; the filtrate amount over time and resulting turbidity are evaluated. Packings increase the filter cake resistance and the separation time of the cakes formed with approximately incompressible solids. However, they exhibit a positive effect on the filtration of a more complex, compressible substance; the process is not only accelerated, but also the quality of the obtained filtrate is not compromised. These results demonstrate potential in the use of packed beds for the filtration of complex biogenic suspensions.     

Notwendigkeit und Vermarktung von Flexibilitätsoptionen im Energiesystem der Zukunft

Demands on production, distribution and consumption of electrical energy change fundamentally with the energy revolution. Energy purchasing costs for inflexible consumers are rising and proceeds of inflexible producers are sinking. Companies are able to reduce costs by marketing operational flexibility options. This article sets out the need of flexibility in the energy system and the new marketing options. Flexibility potentials within infrastructure plants of a chemical park are analyzed, evaluated regarding marketing and activated in the presented research project FlexChemistry.     

Thermoplastic Starch Nanocomposites Reinforced with Cellulose Nanocrystal Suspensions Containing Residual Salt from Neutralization

Sulfuric acid-catalyzed hydrolysis of cellulose commonly isolates cellulose nanocrystals (CNCs). Neutralizing the reactant solution with sodium hydroxide facilitates efficient downstream processing, but residual salt remains in the product. This study examines the reinforcing effects of CNCs from suspensions that contain residual salt on the mechanical properties of thermoplastic starch nanocomposites. By reinforcing starch films with up to 5 wt% CNCs, stiffness and strength are improved by 118% and 79%, respectively, indicating a good dispersion of CNCs in the starch matrix. Compared to nanocomposites incorporating salt-free CNCs, the remaining salt has no significant impact on the material's mechanical performance. The results indicate great potential of CNCs containing residual salt as biobased, low-cost nanofiller in hydrophilic polymer matrices.     

Parameter Estimation for Incompressible Cake Filtration: Advantages of a Modified Fitting Method

There is a widely used linear strategy to determine the parameters specific cake resistance and filter medium resistance in incompressible cake filtration. In this article, it is intended to demonstrate that this strategy has some disadvantages and should be replaced by an alternative nonlinear approach which yields more exact results. Even though the gains in precision are small for most cases, the nonlinear strategy is favored because it involves no extra effort and is grounded in the same physical theory as the original approach. This claim is based on a broad simulation study using noisy data with known parameter values to compare both fitting strategies and judge their accuracies.     

Development of enhanced three-dimensional printed packings for scale-up of distillation columns: A successful case study

This publication presents a general approach for the enhancement of packings regarding scalability, separation efficiency, and fluid dynamic properties using three-dimensional (3D) printing. The methodology is used to develop miniaturized, scalable packings for process development, and scale-up applications. For this purpose, a 3D printable computer-aided design version of the Rombopak 9M industrial packing (RP9M-3D), which is known for its positive scalability properties, was created. An initial characterization by means of computational fluid dynamics simulations and mass transfer measurements reveals positive but also negative design properties. These findings are used to create a more advanced, miniaturized packing structure, the XW-Pak. The evolved structure is compared to the RP9M-3D. The simulation and experimental results show that the enhanced packing, which is still in the early stages of development, exhibits higher separation efficiencies with improved scalability properties at the same void fraction and surface area than the RP9M-3D.     

Interlaboratory study on lipid oxidation during accelerated storage trials with rapeseed and sunflower oil analyzed by conjugated dienes as primary oxidation products

Accelerated storage tests are frequently used to assess the oxidative stability of foods and related systems due to its reproducibility. Various methods and experimental conditions are used to measure lipid oxidation. Differences between laboratories make it necessary to determine the repeatability and reproducibility of oxidation tests performed under the same conditions. The objective of the present interlaboratory study was to evaluate the outcome of a storage test for two different bulk oils, sunflower oil (SFO) and rapeseed oil (RSO), during a period of 9 weeks at 20°C, 30°C, 40°C, and 60°C. Sixteen laboratories were provided with bottled oils and conducted the storage tests according to a detailed protocol. Lipid oxidation was monitored by the formation of conjugated dienes (CD) and the activation energy (E_a) was determined for comparative purposes and statistically evaluated. An increase in CD formation was observed for both oils when the storage temperature was increased in all laboratories. The E_a,1 ranged from 47.9 to 73.3 kJ mol⁻¹ in RSO and from 27.8 to 62.6 kJ mol⁻¹ in SFO, with average values of 58.2 and 46.8 kJ mol⁻¹, respectively. The reproducibility coefficients were 10.9% and 18.2% for RSO and SFO, respectively. Practical applications: In order to compare results on oxidative stability of foods derived from different studies, the reproducibility of storage tests and methods employed to evaluate the oxidation level should be considered. This study provides fundamental data on the reproducibility of lipid oxidation under accelerated storage conditions and defines important parameters to be considered for the conduction of experiments.     

Analyzing seed weight,fatty acid composition,oil, and protein contents in <Emphasis Type="Italic">Vernonia galamensis</Emphasis> germplasm by near-infrared reflectance spectroscopy

Vernonia galamensis is a potential new industrial oilseed crop from the Asteraceae family. The interest in this species is due to the presence of a high vernolic acid content of its seed oil, which is useful in the oleochemical industry for paints and coatings. The development of a rapid, precise, robust, nondestructive, and economical method to evaluate quality components is of major interest to growers, processors, and breeders. NIR reflectance spectroscopy (NIRS) is routinely used for the prediction of quality traits in many crops. This study was conducted to establish a rapid analytical method for determining the quality of intact seeds of V. galamensis. A total of 114 Vernonia accessions were scanned to determine seed weight, FA composition, oil, and protein contents using NIRS. Conventional chemical analysis for FA composition, total oil, and protein contents were performed by GC, Soxhlet extraction, and the Dumas combustion method, respectively. Calibration equations were developed and tested through cross-validation. The coefficient of determination in cross-validation for FA ranged from 0.47 (linoleic acid) to 0.55 (vernolic acid), and for oil, protein, and seed weight from 0.71 (oil) to 0.86 (seed protein). It was concluded that NIRS calibration equations developed for seed weight and seed quality traits can be satisfactorily used as early screening methods in V. galamensis breeding programs.     

Improving the design of depth filters: A model‐based method using optimal control theory

Because there is no general design method for depth filters, especially for layered configurations, this methodological gap is addressed here. Using optimal control theory, paths of the filter coefficient, a measure for local filtration performance, are determined along the filter depth. An analytical optimal control solution is derived and used to validate the numerical algorithm. Two optimal control scenarios are solved numerically: In the first scenario, the goal of constant deposition along the filter depth is addressed. The second scenario aims at maximizing the time until some maximal pressure drop is reached. Furthermore, a computational strategy is presented to derive discrete layers suitable for practical design from the continuous optimal control solutions. All optimized scenarios are compared to one‐layered filter designs and significant improvements are found. As this work is based on strongly validated and widely used filtration models, the presented methods are expected to have broad applicability. © 2017 American Institute of Chemical Engineers AIChE J, 63: 68–76, 2018