Detection of Fouling in a Cross-Flow Heat Exchanger Using Wavelets

Detection of fouling in a heat exchanger experiencing perfect steady-state conditions is not very difficult. But the challenge is to detect fouling when all inputs (inlet temperature of the fluids and the mass flow rates) are simultaneously varying. In this paper it has been considered that the mass flow rates can vary in a ratio of 2, and that the inlet temperatures can vary by about ±20%. This first approach is dedicated to show the feasibility of using the wavelet transform. It has been considered that getting simulated data is the best way. In fact, it is then possible to introduce an arbitrary fouling factor. Thus, in the first part of the paper the model of the heat exchanger is presented. It is developed using Simulink. The validation is carried out on an electrical heater, for which it is possible to find an analytical solution for transient states. It is also shown that steady states are accurately computed over a large range of the number of transfer units and heat capacity rate ratios. Then a brief overview of the wavelet transform is given. Then basic examples show that the wavelet transform can help to find the trend of time series. It is then applied to the analysis of the “wavelet-transformed” effectiveness of the heat exchanger. This analysis is carried out on a sliding observation window (to be able to detect fouling on-line). It is shown that fouling is detected at a very early stage.     

Geometrical analysis of woven fabric microstructure based on micron-resolution computed tomography data

The global mechanical properties of textiles such as elasticity and strength, as well as transport properties such as permeability depend strongly on the microstructure of the textile. Textiles are heterogeneous structures with highly anisotropic material properties, including local fiber orientation and local fiber volume fraction. In this paper, an algorithm is presented to generate a virtual 3D–model of a woven fabric architecture with information about the local fiber orientation and the local fiber volume fraction. The geometric data of the woven fabric impregnated with resin was obtained by micron-resolution computed tomography (μCT). The volumetric μCT-scan was discretized into cells and the microstructure of each cell was analyzed and homogenized. Furthermore, the discretized data was used to calculate the local permeability tensors of each cell. An example application of the analyzed data is the simulation of the resin flow through a woven fabric based on the determined local permeability tensors and on Darcy’s law. The presented algorithm is an automated and robust method of going from μCT-scans to structural or flow models.     

2 GHz controlled current conveyor in standard 0.8 μm BiCMOStechnology

A new controlled current conveyor operating in class A and implemented using a low-cost industrial BiCMOS 0.8 μm process is described. Its electrical characteristics (voltage and current transfers, parasitic impedances) have been measured. With a bias current of 500 μA and supplied under ±2.2 V, the measurement results show that the circuit exhibits very large -3 dB bandwidths: from DC to 4.5 GHz for the voltage transfer (between Y and X) and from DC to 2 GHz for the current transfer (between X and Z)     

A temporal-based SVM approach for the detection and identification of pollutant gases in a gas mixture

Applied Intelligence - Air toxicity and pollution phenomena are on the rise across the planet. Thus, the detection and control of gas pollution are nowadays major economic and environmental...     

Advanced performance evaluation of a reverse osmosis treatment for oilfield produced water aiming reuse

Technology advancements and the increasing need for fresh water resources have created the potential for desalination of oil field brine (produced water) to be a cost-effective fresh water resource for beneficial reuse. At the mature oil and gas production areas in the northeast of Brazil, the majority of wells produce a substantial amount of water in comparison with oil production (more than 90%). At these fields, the produced water has to be treated on site only for oil and solids removal aiming re-injection. The aim of this work is to assess the quality of the produced water stream after a reverse osmosis desalination process in terms of physicochemical characteristics influencing reuse of the water for irrigation or other beneficial uses.     

Trans-Cinnamic Acid Increases Adiponectin and the Phosphorylation of AMP-Activated Protein Kinase through G-Protein-Coupled Receptor Signaling in 3T3-L1 Adipocytes

Adiponectin and intracellular 5′adenosine monophosphate-activated protein kinase (AMPK) are important modulators of glucose and fat metabolism. Cinnamon exerts beneficial effects by improving insulin sensitivity and blood lipids, e.g., through increasing adiponectin concentrations and AMPK activation. The underlying mechanism is unknown. The G_i/G_o-protein-coupled receptor (GPR) 109A stimulates adiponectin secretion after binding its ligand niacin. Trans-cinnamic acid (tCA), a compound of cinnamon is another ligand. We hypothesize whether AMPK activation and adiponectin secretion by tCA is transmitted by GPR signaling. Differentiated 3T3-L1 cells were incubated with pertussis toxin (PTX), an inhibitor of G_i/G_o-protein-coupling, and treated with different tCA concentrations. Treatment with tCA increased adiponectin and the pAMPK/AMPK ratio (p ≤ 0.001). PTX incubation abolished the increased pAMPK/AMPK ratio and adiponectin secretion. The latter remained increased compared to controls (p ≤ 0.002). tCA treatment stimulated adiponectin secretion and AMPK activation; the inhibitory effect of PTX suggests GPR is involved in tCA stimulated signaling.     

On the effect of molecular and hydrocarbon-bonded hydrogen on carbon particle formation in C3O2 pyrolysis behind shock waves

The effect of H₂ and C₂H₂ addition on particle formation in the pyrolysis of C₃O₂/Ar mixtures was studied behind reflected shock waves. An existing reaction mechanism for the pyrolysis of highly-diluted C₃O₂ in argon was expanded to conditions with higher C₃O₂ concentrations (up to 33 volume%) at elevated pressures and high temperatures and was validated against experimental data. The simulations for the gas-phase chemistry were performed with the program CHEMKIN. The heterogeneous particle formation was modeled by post-processing using the program PREDICI relying on the Galerkin method. It was found that in C₃O₂/H₂/Ar pyrolysis, the induction times and rate constants of particle formation do not differ significantly from those of pure C₃O₂/Ar pyrolysis. However, the presence of H₂ reduced the particle volume fraction, the mean diameter of particles, the particle number density, and the maximum temperature rise of the mixture. Hydrocarbon-bonded hydrogen in C₃O₂/C₂H₂/Ar pyrolysis caused significantly increased induction times for particle formation, decreased particle volume fractions, and decreased temperature rises. The different reaction channels for carbon particle formation were identified in view of the role of hydrogen. An alternating reaction channel including C₂ species played an important role in forming polycyclic aromatic hydrocarbons (PAH) in the mixtures.     

Fas-FasL interaction involved in pathogenesis of ocular toxoplasmosis in mice

Ocular toxoplasmosis is a potentially blinding intraocular inflammation. The intent of this study was to investigate the role of Fas-FasL interaction in a murine model of acquired ocular toxoplasmosis induced by intracameral inoculation of Toxoplasma gondii. Intraocular inflammation, Fas and FasL expression on lymphocytes and on ocular tissues, the occurrence of apoptosis, and the frequency of CD8(+) and CD4(+) T cells in the infected eyes were analyzed in C57BL/6 (B6) mice. Susceptibility to parasite-induced intraocular inflammation was observed in Fas-deficient (B6-lpr) and FasL-deficient (B6-gld) mice. Inoculation of 5,000 T. gondii tachyzoites induced significant intraocular inflammation associated with increase of Fas and FasL expression in the inoculated eyes of wild-type B6 mice. Flow cytometry demonstrated a significant increase of Fas and FasL expression on the splenocytes from naive mice incubated in vitro with the parasite and on the splenocytes harvested from the infected mice at day 8 after parasite inoculation. Apoptosis of inflammatory cells and cells in ocular tissues was seen, and a greater frequency of CD8(+) than CD4(+) T cells was observed in the infected eyes. The intensity of intraocular inflammation was greater in B6-lpr and B6-gld mice than in wild-type B6 mice (P < 0.05). The results suggest that Fas-FasL interaction associated with apoptosis is involved in the pathogenesis of acquired ocular toxoplasmosis in mice.     

The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting tools

Due to the recent developments of advanced cutting tool materials in the superbarasive family, such as cubic boron nitride (CBN) tools, the interest in cutting hardened steels has increased significantly. High flexibility and ability to manufacture complex workpiece geometry in one set up is the main advantage of hard turning compared to grinding. The focus of this study is to investigate the performance and wear behavior of CBN tools in finish, dry turning of four different hardened steels, treated to the same hardness R_c = 54. The following four materials were machined: X155CrMoV 12 cold work steel (AISI D2), X38CrMoV5 (AISI H11) hot work steel, 35NiCrMo16 hot work steel and 100Cr6 bearing steel (AISI 52100). A large variation in tool wear rate was observed in the machining of these steels. The tool flank grooves have been correlated to the microstructure of these steels, namely the presence of various carbides. The chip study reveals that there is presence of different amounts of white layers in machining these steels.