Promoting positive relations between parents and child--a counseling service for families with infants and young children in Sydney

The "Early Intervention Programme" (EIP) in Sydney, Australia, is a home-based service for distressed families with children 0-3 years of age. It is funded as a child abuse prevention unit. The concept is based on the work of Selma Fraiberg (1980), who developed the first infant mental health program in Michigan, USA. The goal of the EIP is to strengthen the relationship between parents and child through developmental guidance, psychotherapy and/or provision of active help. The child is seen as an important partner in the intervention process.     

Crystallographic and morphological characteristics of oxidation growth pits in wustite grown at 1200 °C

In situ oxidation of polycrystalline iron at 1200 °C and atm has revealed symmetrical square growth pits in the wustite scale. The pit walls are nominally oriented with the {110} planes of the wustite lattice but are dissociated into macro- and microledges consisting of {100}-type planes. Such growth pits intrude into the wustite scale at the gas/oxide interface, and at the oxide/metal interface small oxide nodules intrude into the metal. After sufficiently long oxidation times at 1200 °C, rate control should shift from oxidant arrival to cation volume diffusion, and pits are then destabilized and a planar morphology is achieved.     

Intercomparison of Thermophysical Property Measurements on an Austenitic Stainless Steel

The results of an inter laboratory comparison of thermal conductivity, thermal diffusivity, specific heat capacity, and thermal expansion measurements on austenitic stainless steel in the temperature range between 20 and 1000°C are presented here. Mean values are presented for the physical properties studied. Reliable relative expanded uncertainties can be stated for the properties determined, which were achieved by applying good measurement practice, i.e., 3% for thermal expansion, 5% for specific heat capacity and thermal diffusivity, and 6% for thermal conductivity. The mean values derived from this intercomparison agree well with the results of a previous intercomparison in 1990. An erratum to this article is availabale at .     

Physiological cost of energy-equivalent noise exposures with a rating level of 85 dB(A):: Hearing threshold shifts associated with energetically negligible continuous and impulse noise

In industry continuous or impulse noise does not occur exclusively; rather it is a combination of both. If low-level continuous noise or impulse noise (below 120 dB) is added to an already existing high-level continuous noise this often numerically causes no essential increase in the rating level. Yet, it cannot be expected that also aural strain of these exposures is always negligible. Therefore, in a cross-over test series, ten male subjects (Ss) were exposed to white noise of 94 dB(A) for 1 h (TS I), energy-equivalent to an 8 h-rating level L_Ard of 85 dB(A). In a second test series (TS II) the same exposure was combined with 900 energetically negligible 5-ms impulses with a noise level of 113 dB(A) which increased the rating level by only 0.4 dB. The noise exposure of TS I and TS II was followed by an idealized resting phase in a soundproof cabin. In a third test series (TS III) the continuous noise of 94 dB(A) / 1 h was followed by 3 h of white noise at 70 dB(A). Such an additional load increases the L_Ard by merely 0.1 dB to 85.1 dB(A). In all three test series, the noise-induced temporary threshold shift (TTS₂) and its restitution were measured. The continuous noise exposure of 94 dB(A) for 1 h was associated with a TTS₂ of around 20 dB which disappeared completely after about 2 h. The additional impulse noise caused a small increase in the TTS₂ and a prolongation of the restitution time. The maximum mean temporary threshold shift for the group increased only slightly (from 22.5 to 25.9 dB, which nevertheless can be statistically proven at a significance level of p 0.99). Yet, more importantly, the restitution time increased from 126 to 175 min, i. e. 3 h, which can be statistically proven at a significance level of p0.95. The TTS₂-values of TS III did not differ significantly from those resulting from TS I. That was expected as the conditions up to that point in time were identical. But due to the additional subsequent exposure, the mean restitution time increased considerably from 126 min up to 240 min (4 h). The mean total physiological cost represented by the integrated restitution temporary threshold shift (IRTTS) increased in TS II by approximately 40% and in TS III even by 140%.

Relevance to industry

The results of the study show that levels of noise which have no influence on the rating level which traditionally is calculated according to the energy-equivalence principle are often of great importance, as they can lead to considerably prolonged restitution times. Therefore, the purely energy-equivalent determination of the rating level of both impulse noise and low sound levels can lead to an underestimation of latent problems so that over time a reversible TTS can evolve into a permanent threshold shift. The results are also of importance for the acoustic design of break rooms for noise-exposed workers. There should be conditions that allow an undisturbed restitution of hearing.     

Evolution of Globular Microstructure in New Rheocasting and Super Rheocasting Semi‐Solid Slurries

Based on the solidification theory for metal alloys, a simple recipe for the controlled processing of globular microstructures without external stirring is presented: Firstly, small solidification nuclei must be distributed homogeneously throughout a melt. In New Rheocasting (NRC) these nuclei are formed by forced homogeneous nucleation due to partial quenching of the melt, while in Super Rheocasting (SRC) the nuclei are “second phase particles” in specially designed alloys, which are grown in a controlled fashion in a certain temperature range. Potential alloy compositions for SRC are provided. Secondly, given these melts with small particles in them, globular growth can be assured by utilizing the Gibbs‐Thomson “self healing effect” and slow further cooling to allow diffusion in the melt and to suppress constitutional supercooling. This simple recipe is applicable to various ferrous and non‐ferrous alloys. If an SRC alloy is cooled more rapidly than necessary for globular growth of the primary phase, but is held sufficiently long in the SRC range for dispersoid formation, these dispersoids can act as potent grain refiners and possibly enhance elevated temperature properties. A combination of both processes by using SRC alloys in the NRC equipment may lead to pressure tight castings with low porosity and finer grain structure than can be achieved with NRC on its own, and consequently, better mechanical properties.     

Light Microscopy 1981: The State of the Art

Melamine-formaldehyde, a universally used technical aminoplast, can be modified into a water-compatible electron microscopic embedding medium. The complete processing of tissues—from fixation to sectioning—is described in this paper. It produces stable sections showing remarkable ultrastructural detail.