Pep19 Has a Positive Effect on Insulin Sensitivity and Ameliorates Both Hepatic and Adipose Tissue Phenotype of Diet-Induced Obese Mice

Peptide DIIADDEPLT (Pep19) has been previously suggested to improve metabolic parameters, without adverse central nervous system effects, in a murine model of diet-induced obesity. Here, we aimed to further evaluate whether Pep19 oral administration has anti-obesogenic effects, in a well-established high-fat diet-induced obesity model. Male Swiss mice, fed either a standard diet (SD) or high-fat diet (HFD), were orally administrated for 30 consecutive days, once a day, with saline vehicle or Pep19 (1 mg/kg). Next, several metabolic, morphological, and behavioral parameters were evaluated. Oral administration of Pep19 attenuated HFD body-weight gain, reduced in approximately 40% the absolute mass of the endocrine pancreas, and improved the relationship between circulating insulin and peripheral insulin sensitivity. Pep19 treatment of HFD-fed mice attenuated liver inflammation, hepatic fat distribution and accumulation, and lowered plasma alanine aminotransferase activity. The inguinal fat depot from the SD group treated with Pep19 showed multilocular brown-fat-like cells and increased mRNA expression of uncoupling protein 1 (UCP1), suggesting browning on inguinal white adipose cells. Morphological analysis of brown adipose tissue (BAT) from HFD mice showed the presence of larger white-like unilocular cells, compared to BAT from SD, Pep19-treated SD or HFD mice. Pep19 treatment produced no alterations in mice behavior. Oral administration of Pep19 ameliorates some metabolic traits altered by diet-induced obesity in a Swiss mice model.     

Microstructure-Mechanical Property Relationships in Hot Isostatically Pressed Alumina and Zirconia-Toughened Alumina

The rates of densification and the mechanical properties of pure Al₂O₃ and ZrO₂-toughened Al₂O₃ (ZTA) have been investigated as a function of the temperatures and time schedules used for hot isostatic pressing (HIP) as a postsintering heat treatment for samples which had already been pressureless sintered in air at 1460°C for 45 min. ZTA hot isostatically presed at 1400°C had a finer grain size and a narrower grain size distribution than ZTA hot isostatically pressed at 1600°C. At both HIP conditions, the density which could be obtained was almost the maximum theoretical density. The amount of grinding-induced and fracture-induced monoclinic ZrO₂ formed as a result of the tetragonal → monoclinic martensitic transformation in ZTA was higher in the samples hot isostatically pressed at 1400°C. ZTA hot isostatically pressed at 1600°C and 100 MPa had fewer flaws and higher strengths than ZTA hot isostatically pressed at 1400°C for the same time, with a gradual improvement in mechanical properties with increasing HIP time at each of these two temperatures. The best mechanical properties were obtained from ZTA hot isostatically pressed at 100 MPa and 1600°C for 1 h: these specimens had a four-point bend strength of 940 ± 15 MPa at room temperature and 540 ± 15 MPa at 1000°C and an indentation fracture toughness at room temperature of 9.4 ± 0.2 MPa·m^1/2.     

The Role of Cytochrome P450 1B1 in Dibenzo[ a,l ]pyrene-induced Carcinogenesis

In human cells, the most carcinogenic polycyclic aromatic hydrocarbon dibenzo[ a,l ]pyrene (DB[ a,l ]P) forms high levels of DNA adducts through formation of the ( m )- anti -(11 R ,12 S )-diol (13 S ,14 R )-epoxide (DB[ a,l ]PDE) and its metabolic precursor, the ( m )-(11 R ,12 R )-diol. Generation of these adducts results from the catalytic activity of cytochrome P450 (P450) 1A1 and 1B1. Additional adducts such as (+)- syn -DB[ a,l ]PDE-DNA or more polar DNA adducts were detected only after increasing exposure doses of the parent compound or in cells that express P450 1A1. At low concentrations (·;100 nM) exclusively ( m )- anti -DB[ a,l ]PDE-DNA adducts were formed by P450 1B1, which is constitutively expressed in many mammalian tissues. Measurement of DNA binding and mutagenicity of DB[ a,l ]P in V79 cells expressing human P450 enzymes revealed a higher activity of P450 1B1 compared to 1A1 at low concentrations. Treatment of P450 1B1 knockout mice and DNA binding studies with fibroblasts isolated from these animals provided further evidence for the central role of P450 1B1-catalyzed formation of ( m )- anti -DB[ a,l ]PDE-DNA adducts in DB[ a,l ]P-induced carcinogenesis.     

厌氧氨氧化技术用于高氨废水脱氮

在简要介绍厌氧氨氧化菌生理生化特性的基础上,总结了目前应用厌氧氨氧化的主要工艺及其工程实例,重点分析了厌氧氨氧化技术在处理高氨废水实际工程应用过程中需要解决的关键技术,为厌氧氨氧化技术在污水处理工程中的推广提供技术借鉴.     

N-Aminierung von Isochinolinbasen

N-Amination of Isoquinoline Bases 3, 3-Pentamethylene oxaziridine 1 forms an N N-bond with secondary isoquinoline bases 2a – f to give the cyclohexylidene hydrazines 3a – f . In some cases nitrogen elimination yielding indane derivatives 13b, 13e competes with hydrazone formation. The cyclic Schiff'base 14 and the β-carboline derivative 16 can also be aminated.     

Untersuchungen an Caramel Curiepunkt-Pyrolyse von Caramelzuckersirupen und andere strukturspezifische Untersuchungen

Zusammenfassung Es wird über die Curiepunkt-Pyrolyse handelsüblicher Caramelzuckersirup-Proben und die Identifizerung von über 80 Pyrolysefragmenten durch kombinierte Capillargaschromatographie/ Massenspektrometrie berichtet. Mit dieser Methode sind die Proben untereinander and gegenüber Couleuren differenzierbar. Mittels Ultrafiltration wurden die Komponenten einer intensiv braunen Probe in Fraktionen unterschiedlicher Molekülmasse getrennt and nach Pyrolyse miteinander verglichen. In einer niedermolekularen Fraktion wurden nach Permethylierung Laevoglucosan, 1,6-Anhydro--d-glucofuranose, Trehalose, Cellobiose, Maltose, Isomaltose und Gentiobiose Bowie einige Difructosedianhydride nachgewiesen.

---

Investigations of caramel. Curiepoint pyrolysis of caramel syrups and other investigations of structure

Summary A report is given on the investigation of commercial caramel syrups by Curiepoint pyrolysis and the identification of more than 80 pyrolysis products by capillary gas chromatography mass spectrometry. This method enables the differentiation between different caramel syrups and, additionally, between caramel syrups and caramel colours. Compounds of different molecular masses have been examined in the same manner after they have been isolated from an intense brown caramel sample by ultrafiltration. In a fraction consisting of compounds with low molecular masses laevoglucosan, 1,6-anhydro--d-glucofuranose, trehalose, cellobiose, maltose, isomaltose, gentiobiose and some difructosedianhydrides were identified by GC/MS after permethylation.

     

Oxidation resistant ceramic foam from a silicone preceramic polymer/polyurethane blend

Silicon oxycarbide (SiOC) ceramic foams, produced by the pyrolysis of a foamed blend of a methylsilicone preceramic polymer and polyurethane (PU) in a 1/1 wt.% ratio, exhibit excellent physical and mechanical properties. The proposed process allows to easily modify the density and morphology of the foams, making them suitable for several engineering applications. However, it has been shown that, due to residual carbon present in the oxycarbide phase after pyrolysis, the foams are subjected to an oxidation process that reduces their strength after high temperature exposure to air (12 h 1200°C). A modified process, employing the same silicone resin preceramic polymer but a much lower PU content (silicone resin/PU=5.25/1 wt.% ratio), has been developed and is reported in this paper. Microstructural investigations showed that carbon rich regions deriving from the decomposition of the polyurethane template are still present in the SiOC foam, but have a much smaller dimension than those found in foams with a higher PU content. Thermal gravimetric studies performed in air or oxygen showed that the low-PU containing ceramic foams display an excellent oxidation resistance, because the carbon-rich areas are embedded inside the struts or cell walls and are thus protected by the dense silicon oxycarbide matrix surrounding them. SiOC foams obtained with the novel process are capable to maintain their mechanical strength after oxidation treatments at 800 and 1200°C (12 h), while SiOC foams obtained with a higher amount of PU show about a 30% strength decrease after oxidation at 1200°C (12 h).