Application of K2CO3 catalysts in the coal gasification process using nuclear heat

Conventional gasification processes use coal not only as feedstock to be gasified but also for supply of energy for reaction heat, steam production, and other purposes. With a nuclear high temperature reactor (HTR) as a source for process heat, it is possible to transform the whole of the coal feed into gas. This concept offers advantages over existing gasification processes: saving of coal, as more gas can be produced from coal; less emission of pollutants, as the HTR is used for the production of steam and electricity instead of a coal-fired boiler; and a lower production cost for the gas. However, the process has the disadvantage that the temperature is limited to the outlet temperature (950 °C max) of the helium cooling gas of the HTR. Therefore the possibility of catalytic steam gasification was examined. Model calculations based on experimental results show that use of 3–4 wt% relative to coal of K²CO³ catalyst increases the throughput of a large scale nuclear gasification plant by ≈65%, while gas production costs decrease by ≈15%. Corrosion by catalysts is not significant at low concentration (< 5 wt%) and low temperature (< 900 °C).     

Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor

In the last years, a variety of processes respectively process steps have been investigated for the production of niobium powder. This is due to the fact that niobium capacitors could be a viable alternative to tantalum capacitors from a performance, availability, and price point of view. The reduction of niobium pentoxide by magnesium results in fine powders with high specific surface area but has the disadvantages of a very exothermic nature and the formation of magnesium niobate. It is shown in this work that the application of a continuously operating cyclone reactor and the use of niobium(IV) oxide as raw material solve these problems. A good control of the highly exothermic reaction within the cyclone reactor was achieved in the cyclone reactor by the ratio between gas flow rate and powder flow rate as well as by a proper preheating of the gas.     

Water quality in the southern Tibetan Plateau: chemical evaluation of the Yarlung Tsangpo (Brahmaputra)

Yarlung Tsangpo (Brahmaputra) is the largest river system draining the northern slopes of the Himalayan ranges on the southern Tibetan Plateau. It remains one of only two large non‐regulated rivers in China. In this paper the chemical composition of Yarlung Tsangpo and its major tributaries (Raga Tsangpo, Nyangchu and Lhasa River) are studied. Water samples (n = 55) were collected and measured for major ions, trace elements and nutrients in order to: (1) define the present chemical quality of this water course; (2) address possible mechanisms governing the water chemical compositions, and (3) identify potential sources for contaminants. Multivariable analysis shows that geology and climate are the major explanatory variables for the spatial variation in water chemistry in this river system. In general, water chemistry is mainly controlled by carbonate weathering, with Ca²⁺ and HCO being the dominant ions. In addition, runoff from brackish/saline lakes and geothermal waters, enriched in Na⁺, Cl^?, SO, Mg²⁺ and Li, are major contributors of elevated concentrations of these solutes in the headwater regions resulting in a relatively high loading of total dissolved solids (TDS, 146–397 mg L^?1). Levels of most heavy metals and total dissolved nutrients were generally found to be low. However, elevated As concentration (avg. 95 μg L^?1) in the headwaters and additions from untreated wastewater were evident at some locations. Copyright © 2009 John Wiley & Sons, Ltd.     

An Interoperable Grid Information System for Integrated Resource Monitoring Based on Virtual Organizations

In many Grid infrastructures different kinds of information services are in use, which utilize different incompatible data structures and interfaces to encode and provide their data. Homogeneous monitoring of these infrastructures with the monitoring data being accessible everywhere independently of the middleware which provided it, is the basis for a consistent status reporting on the Grids’ resources and services. Thus, interoperability or interoperation between the different information services in a heterogeneous Grid infrastructure is required. Monitoring data must contain the identity of the affected Virtual Organization (VO) so that it can be related to the resources and services the VO has allocated to enable VO-specific information provision. This paper describes a distributed architecture for an interoperable information service, which combines data unification and categorization with policies for VO membership, VO resource management and data transformations. This service builds the basis for an integrated and interoperating monitoring of Grids, which provide their data to more than one VO and utilize heterogeneous information services.     

DuD Report

DuD Report

DuD Report     

Quality management in service ecosystems

Service-oriented architectures and Web services mature and have become more widely accepted and used by industry. This growing adoption increased the demands for new ways of using Web service technology. Users start re-combining and mediating other providers’ services in ways that have not been anticipated by their original provider. Within organisations and cross-organisational communities, discoverable services are organised in repositories providing convenient access to adaptable end-to-end business processes. This idea is captured in the term Service Ecosystem. This paper addresses the question of how quality management can be performed in such service ecosystems. Service quality management is a key challenge when services are composed of a dynamic set of heterogeneous sub-services from different service providers. This paper contributes to this important area by developing a reference model of quality management in service ecosystems. We illustrate the application of the reference model in an exploratory case study. With this case study, we show how the reference model helps to derive requirements for the implementation and support of quality management in an exemplary service ecosystem in public administration.     

Structure and Magnetic Property Control of Copper Hydroxide Acetate by Non‐Classical Crystallization

Copper hydroxide acetate (CHA), one layered hydroxide compound with tunable magnetism, attracts great interest because of its potential applications in memory devices. However, ferromagnetism for CHA is only demonstrated by means of GPa pressure. Herein, a new method is reported, involving the combination of different crystallization pathways to control crystallization of amorphous CHA toward the formation of CHA/polymer composites with tunable magnetic properties and even a tunability that can be tested at room temperature. By using poly[(ethylene glycol)₆ methyl ether methacrylate]‐block‐poly[2‐(acetoacetoxy) ethyl methacrylate] (PEGMA‐b‐PAEMA) diblock copolymers as additives in combination with a post‐treatment process by ultracentrifugation, it is demonstrated that CHA and PEGMA‐b‐PAEMA form composites exhibiting different magnetic properties, depending on CHA in‐plane nanostructures. Analytical characterization reveals that crystallization of CHA is induced by ultracentrifugation, during which CHA nanostructures can be well controlled by changing the degrees of polymerization of the PEGMA and PAEMA blocks and their block length ratios. These findings not only present the first example of using crystallization from polymer stabilized amorphous precursors toward the generation of magnetic nanomaterials with tunable magnetism but also pave the way for the future design of functional composite materials.     

Reasoning about action and change

Reasoning about change is a central issue in research on human and robot planning. We study an approach to reasoning about action and change in a dynamic logic setting and provide a solution to problems which are related to the Frame problem. Unlike most work on the frame problem the logic described in this paper is monotonic. It (implicitly) allows for the occurrence of actions of multiple agents by introducing non-stationary notions of waiting and test. The need to state a large number of frame axioms is alleviated by introducing a concept of chronological preservation to dynamic logic. As a side effect, this concept permits the encoding of temporal properties in a natural way. We compare the relative merits of our approach and non-monotonic approaches as regards different aspects of the frame problem. Technically, we show that the resulting extended systems of propositional dynamic logic preserve (weak) completeness, finite model property and decidability.