Preparation of flexible transparent acryl/alumina nano-hybrid materials exhibiting low thermal expansion coefficient

In this study, flexible transparent hybrid films with low thermal expansion coefficient were prepared by combination of alumina fillers and polymerizable/non-polymerizable surface modifiers with carboxyl group. Four types of alumina fillers with different shape and size were used in this study, and could modify with surface modifiers containing carboxyl groups by electrostatic interaction and disperse homogeneously in resulting hybrid films regardless of the shape and size. So the hybrid films obtained showed high transmittance around 90%T, and it was considered, from transmission electron microscopic analysis, alumina fillers were dispersed at near original filler size, without aggregation. Moreover, thermal mechanical analysis cleared that the use of pillar or fiber type filler is more effective to reduce CTE compared with plate type fillers, especially CTE of hybrid film prepared with fiber type filler was drastically decreased to 17 ppm/K, while the influence by the difference of filler shape/size was not observed on tensile properties, surface hardness. By use of fiber type alumina filler and combination of polymerizable surface modifier and non-polymerizable surface modifier which seems to interact with matrix, for optimizing of the crosslink density, it was possible to reduce CTE, while the good mechanical properties was kept. Finally, hybrid film indicating low CTE value as 19 ppm/K, high flexibility (windable against 0.4 mm radius steel bar), and good tensile properties and surface hardness which were equal to or higher than those of matrix could prepared.     

Identification of the Biosynthetic Gene Cluster for Himeic Acid A: A Ubiquitin‐Activating Enzyme (E1) Inhibitor in Aspergillus japonicus MF275

Himeic acid A, which is produced by the marine fungus Aspergillus japonicus MF275, is a specific inhibitor of the ubiquitin‐activating enzyme E1 in the ubiquitin–proteasome system. To elucidate the mechanism of himeic acid biosynthesis, feeding experiments with labeled precursors have been performed. The long fatty acyl side chain attached to the pyrone ring is of polyketide origin, whereas the amide substituent is derived from leucine. These results suggest that a polyketide synthase–nonribosomal peptide synthase (PKS‐NRPS) is involved in himeic acid biosynthesis. A candidate gene cluster was selected from the results of genome sequencing analysis. Disruption of the PKS‐NRPS gene by Agrobacterium‐mediated transformation confirms that HimA PKS‐NRPS is involved in himeic acid biosynthesis. Thus, the him biosynthetic gene cluster for himeic acid in A. japonicus MF275 has been identified.     

Effect of steric hindrance on hydrogen‐bonding interaction between polyesters and natural polyphenol catechin

The phase behaviors for the blends of poly(3‐hydroxypropionate) (PHP), poly(L ‐lactide) (PLLA), poly(D ‐lactide) (PDLA), and poly(D,L ‐lactide) (PDLLA) with catechin were investigated by differential scanning calorimetry. In PLLA/catechin, PDLA/catechin, and PDLLA/catechin blends, two glass transitions were detected when the catechin content was ≥40 wt %, whereas in PHP/catechin blends only one glass transition was observed over the whole range of blend compositions. The former and the latter results should reflect the inhomogeneous and the homogeneous nature of the blends, respectively, in the amorphous phase. These different phase behaviors should arise from the differences in the chemical structures between PHP and PLLA/PDLA/PDLLA, which dominates the strength and the number of intermolecular hydrogen‐bonding interactions between the ester carbonyl groups of polyesters and the phenol groups of catechin. As detected by FTIR spectroscopy, in comparison with PHP, the steric hindrance of side‐chain methyl groups of PLLA, PDLA, and PDLLA might restrain the formation of hydrogen bonds between their ester carbonyl groups and the phenol hydroxyl groups of catechin, even weakening the strength of such hydrogen bonds. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3565–3573, 2004     

Effect of acid treatment on thermal extraction yield in ashless coal production

Coals of different ranks were acid-treated in aqueous methoxyethoxy acetic acid (MEAA), acetic acid (AA), and HCl. The acid-treated coals were extracted with polar N-methyl-2-pyrrolidinone (NMP) and nonpolar 1-methylnaphthalene (1MN) solvents at temperatures from 200 to 360 °C for 10-60 min. The thermal extraction yields with NMP for some acid-treated low-rank coals increased greatly; for example, the extraction yield for Wyodak coal (%C; 75.0%) increased from 58.4% for the raw coal to 82.9% for coal treated in 1.0 M MEAA. Conversely, the extraction yields changed minimally for all the acid-treated coals extracted in 1-MN. The type and concentration of acid affected the extraction yield when NMP was used as the extraction solvent. With increasing MEAA concentration from 0.01 to 0.1 M, the extraction yield for Wyodak coal increased from 66.3 to 81.4%, and subsequently did not change clearly with concentration. Similar changes in the extraction yield with acid concentration were also observed with AA and HCl. The de-ashing ratio for coals acid-treated in MEAA, AA, and HCl also increased greatly with concentration from 0.01 to 0.1 M, which corresponded to the change in the thermal extraction yield in NMP. For the acid-treated coals, high extraction yields were obtained at lower extraction temperatures and shorter extraction times than for the raw coal. The mechanisms for the acid treatment and thermal extraction are discussed.     

Joining of SiC by Al infiltrated TiC tape: Effect of joining parameters on the microstructure and mechanical properties

SiC ceramics were successfully joined by Al infiltrated TiC tapes at 900-1100 °C for 0.5-2 h in vacuum. Phase constituents, microstructure and mechanical strength of the prepared SiC joints were characterized. The prepared SiC joints display dense interlayer and crack-free interface. The interlayer primarily consists of TiC and Al phases, together with small amount of TiAl₃ and trace of Al₄C₃. With increasing the joining temperature or time, the interface layer either thickens or grows to multiple layers. The bending strengths of the SiC joints are higher than 190 MPa as bonded at present conditions, and are closely related with the property of interface and interlayer.     

Effect of Al4SiC4 on the Al2O3SiCSiO2C refractory castables performance

Carbon-containing refractories are widely used in the steelmaking process due to their outstanding properties and, in order to improve their oxidation resistance, the so-called antioxidants have often been used. Al₄SiC₄ is pointed out as a novel additive that presents suitable properties such as Al, but without its drawbacks. Therefore, the effect of Al₄SiC₄ addition to Al₂O₃SiCSiO₂C castables designed for lining blast furnace troughs was investigated in this work. Apparent porosity, oxidation, thermogravimetric, X-ray diffraction, hot elastic modulus tests and thermodynamic calculations were carried out in order to better understand the antioxidant effects and reaction mechanisms. Additionally, the collected results were compared with those from the compositions containing other commonly used antioxidants (Si, B₄C and sodium borosilicate glass). The performance of the novel additive proved to be limited as most of the carbon source used reacted earlier than the Al₄SiC₄ action. As a consequence, intense carbon oxidation, along with the thermal expansion mismatch among the phases during the cooling step, intensified the deterioration of the evaluated refractory material.     

Novel Heneicosadienoic and Tricosadienoic Acid Isomers in Ovaries of Marine Archaeogastropods

To investigate unusual odd-chain fatty acids (FA) from gonads of archaeogastropods, limpets Cellana grata and Cellana toreuma, a subfraction enriched in FA with two double bonds extracted from the gonads was obtained by using argentation thin-layer chromatography. The resulting fraction was analyzed by using capillary gas chromatography-mass spectrometry of its methyl esters, 3-pyridylcarbinol esters and pyrrolidide derivatives. Six novel all-cis diene isomers were identified as 7,18-heneicosadienoic (21:2Δ7,18), 8,14-tricosadienoic (23:2Δ8,14), 9,15-tricosadienoic (23:2Δ9,15), 7,18-tricosadienoic (23:2Δ7,18), 9,18-tricosadienoic (23:2Δ9,18), and 9,20-tricosadienoic (23:2Δ9,20) acids. In the present study, the differences in the proportion of tricosadienoic acid isomers between the ovary lipids of C. grata and C. toreuma were recognized.     

Prediction of a New Ligand-Binding Site for Type 2 Motif based on the Crystal Structure of ALG-2 by Dry and Wet Approaches

ALG-2 is a penta-EF-hand Ca(2+)-binding protein and interacts with a variety of intracellular proteins. Two types of ALG-2-binding motifs have been determined: type 1, PXYPXnYP (X, variable; n = 4), in ALIX and PLSCR3; type 2, PXPGF, in Sec31A and PLSCR3. The previously solved X-ray crystal structure of the complex between ALG-2 and an ALIX peptide containing type 1 motif showed that the peptide binds to Pocket 1 and Pocket 2. Co-crystallization of ALG-2 and type 2 motif-containing peptides has not been successful. To gain insights into the molecular basis of type 2 motif recognition, we searched for a new hydrophobic cavity by computational algorithms using MetaPocket 2.0 based on 3D structures of ALG-2. The predicted hydrophobic pocket designated Pocket 3 fits with N-acetyl-ProAlaProGlyPhe-amide, a virtual penta-peptide derived from one of the two types of ALG-2-binding sites in PLSCR3 (type 2 motif), using the molecular docking software AutoDock Vina. We investigated effects of amino acid substitutions of the predicted binding sites on binding abilities by pulldown assays using glutathione-S-transferase -fused ALG-2 of wild-type and mutant proteins and lysates of cells expressing green fluorescent protein -fused PLSCR3 of wild-type and mutants. Substitution of either L52 with Ala or F148 with Ser of ALG-2 caused loss of binding abilities to PLSCR3 lacking type 1 motif but retained those to PLSCR3 lacking type 2 motif, strongly supporting the hypothesis that Pocket 3 is the binding site for type 2 motif.     

Progress in pressureless sintering of boron carbide ceramics – a review

ABSTRACT

Boron carbide (B₄C) ceramics has many outstanding performance, such as extremely high hardness, low density, high melting point, high elastic modulus, high thermoelectromotive force, high chemical resistance, high neutron absorption cross section, high impact and excellent wear resistance. Therefore, B₄C ceramics can be used in various industrial applications, such as lightweight ceramic armour, high temperature thermocouples, neutron absorber, reactor control rods in nuclear power engineering, polishing media for hard materials, abrasive media for lapping and grinding, and wear resistant components (blasting nozzles, die tips and grinding wheels). Pressureless sintering is the method with industrialised application value for B₄C ceramics, however, it is impossible to sinter pure B₄C ceramics to high densities without additives by pressureless sintering. So sintering additives must be used to promote the densification of B₄C ceramics. The different sintering additives used to promote the densification of boron carbide will be described in this review, including carbon additives, metallic additives, oxide additives, non-oxide additives, combined additives and rare earth oxide additives. Finally, the recent research trends for sintering methods and sintering additives of B₄C ceramics will also be proposed.