Future prospect of remote Cat-CVD on the basis of the production, transportation and detection of H atoms

The future prospect of remote Cat-CVD, in which the decomposition and the deposition chambers are separated, is discussed on the basis of the absolute density measurements of H atoms. It is now well recognized that uniform deposition is possible on a large area without plasma damages by Cat-CVD. However, we may not overlook the demerits in Cat-CVD. One of the demerits is the poisoning of the catalyzer surfaces by the material gases, both temporary and permanent. One technique to overcome this problem is remote Cat-CVD. The question is how to separate the decomposition and deposition areas. If the separation is not enough, there should be back diffusion of the material gases, which will poison the catalyzers. If the separation is too tight, radicals may not effuse out from the decomposition chamber. These problems are discussed and it is shown that SiO₂ coating to reduce the radical recombination rates on walls is promising. The possibility of the polytetrafluoroethene coating by Cat-CVD is also discussed.     

Recent situation of industrial implementation of Cat-CVD technology in Japan

Efforts of industrial application of Cat-CVD technology are surveyed. Recent movement of industrial implementation is also reviewed by showing examples in Japanese industry. Cat-CVD technology is originally developed as a new tool for fabricating semiconductor devices, however, recently, use of the technology is attempted in various fields such as chemical, mechanical and bio-technical engineering. It is shown that Cat-CVD has high feasibility as a fundamental technology of modern industries.     

Crystal structure and physical properties of a magnetic molecular conductor (EDO-TTFVODS)2FeCl4

Crystal structure, and electrical conducting and magnetic properties of a radical cation salt of EDO-TTFVODS with magnetic FeCl₄^? ion, (EDO-TTFVODS)₂FeCl₄ (EDO-TTFVODS = ethylenedioxytetrathiafulvalenoquinone-1,3-diselenolemethide) are reported. In this salt, there are two independent donor molecules formed two different layers A and B, and the counter FeCl₄^? ions layer is sandwiched between two donor layers A and B along the b-axis. The donor molecules form the one-dimensional columns along the a-axis in both donor layers. This salt shows high conductivity at room temperature (σ_RT = 25 S cm^?1) and a metallic behavior down to ca. 80 K, where a metal–insulator transition however occurs. The magnetic susceptibility obeys a Curie–Weiss law (Curie constant C = 4.42 emu K mol^?1 and Weiss temperature Θ = ?1.5 K), without any magnetic ordering down to 1.8 K. This result suggests the weak antiferromagnetic interaction between the d spins of FeCl₄^? ions.     

An enumeration scheme to generate constrained exact checkerboard patterns

Checkerboard patterns belong to a special class of 2-stage guillotine patterns that require less machine time to be cut. In this paper we propose an enumerative algorithm to generate exact constrained checkerboard patterns. At each node of the enumeration tree a constructive procedure is used to generate a feasible pattern. In addition, an upper bound on the objective function value is calculated to decide whether further branching from the node is worth. The algorithm was implemented and computational tests were performed. The test results indicate that the proposed scheme outperforms previous methods of the literature in terms of execution times.     

Use of pepsin for collagen extraction from the skin of bigeye snapper (Priacanthus tayenus)

Extraction and some properties of pepsin-solubilised collagens from the skin of bigeye snapper (Priacanthus tayenus) were investigated. Addition of bigeye snapper pepsin (BSP) at a level of 20 kUnits/g of defatted skin resulted in an increased content of collagen extracted from bigeye snapper skin. The yields of collagen from bigeye snapper skin extracted for 48 h with acid and with BSP were 5.31% and 18.74% (dry basis), respectively. With pre-swelling in acid for 24 h, collagen extracted with BSP at a level of 20 kUnits/g of defatted skin for 48 h had a yield of 19.79%, which was greater than that of collagen extracted using porcine pepsin at the same level (13.03%). The skin collagen was characterised to be type I with no disulfide bond. Electrophoretic study revealed slight differences in molecular weight between acid-solubilised collagen and all pepsin-solubilised collagens. The molecular weights of α1 and α2 chains in acid-solubilised collagen were estimated to be 120 and 112 kDa, respectively, whereas α1 and α2 chains of pepsin-solubilised collagens had molecular weights of 118 and 111 kDa, respectively. The result suggested that these pepsin-solubilised collagens might undergo partial cleavage in the telopeptide region by pepsin treatment. The maximum transition temperature (T_max) of acid-solubilised collagen was observed at 32.5 °C, which was slightly higher than that of pepsin-solubilised collagens (by about 1 °C). Generally, all collagens were highly solubilised in the pH range of 2–5 and sharply decreased at the neutral pH. No changes in solubility were observed in the presence of NaCl up to 3% (w/v) and the decrease was more pronounced with increasing NaCl concentration.     

Methane Oxidation on Perovskite-Type Ca(Mn1−xTix)O3−δ

X-ray photoelectron spectroscopy was performed to elucidate the catalytic activity of CH₄ oxidation on perovskite-type Ca(Mn_{1− x} Ti _x )O_3−δ synthesized at 1173 K in a flow of oxygen from a gel with citric acid and ethylene glycol. The Mn ion content decreases and the ratio of the Mn³⁺ ion in the Mn ion increases with increases in x . Ca(Mn_{1− x} Ti _x )O_3−δ has a high catalytic activity of CH₄ oxidation at x =0.4. These results indicate that the catalytic activity strongly depends on the Mn³⁺ ion content of the surface.     

An experimental study on aerodynamic sound generated from wake interaction of circular cylinder and airfoil with attack angle in tandem

In our previous study, the effects of the interval between the cylinder and the airfoil on the aerodynamic sound were investigated and compared with the cases of single circular and single airfoil. In this study, the effects of the attack angle of the airfoil located downstream on the characteristics of aerodynamic sound and the wake structure are investigated at a given interval between the cylinder and the airfoil. It is found that the sound pressure level of DFN and the peak frequency decrease with increasing attack angle of airfoil because of the diffusive wake structure due to the increased back pressure of circular cylinder, which is caused by the blocking effect of airfoil. It is shown that the sound sources are corresponded to the attack points of shedding vortex form the upstream circular cylinder to the downstream airfoil. We conclude that the pressure fluctuation at the airfoil surface effects on the sound pressure level, from the flow visualizations and the exploration test of sound source.     

Output power leveling of wind turbine generators using pitch angle control for all operating regions in wind farm

Effective utilization of renewable energies such as wind energy instead of fossil fuels is desirable. Wind energy is not constant and windmill output is proportional to the cube of the wind speed, which causes the generated power of wind turbine generators (WTGs) to fluctuate. In order to reduce the output power fluctuation of wind farms, this paper presents an output power leveling control strategy for a wind farm based on both the average wind farm output power and the standard deviation of the wind farm output power, a cooperative control strategy for WTGs, and pitch angle control using a generalized predictive controller (GPC) in all WTG operating regions. Simulation results using an actual detailed model for wind farm systems show the effectiveness of the proposed method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 158(4): 31– 41, 2007; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20448     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Roughness of amorphous/crystalline interface in pre-amorphization implantation: Molecular dynamic simulation and modeling

Pre-amorphization implantation has been applied as a shallow junction technology. Roughness at amorphous/crystalline (a/c) interface should be controlled to improve junction characteristics. To understand and model a/c interface roughness, molecular dynamic method is applied in simulating pre-amorphization implantation. A method to reproduce roughness at a/c interface by molecular dynamic simulation is presented. A model of interface roughness is presented. Si and Ge implantation from 2-20 keV at a dose of 1 × 10¹⁵ cm⁻² is simulated. The depth of a/c interface is reproduced. Experimental results of a/c interface roughness are successfully simulated. The interface roughness is well reproduced and interpreted by the model presented.