Numerical simulation of separated flow transition and heat transfer around a two‐dimensional rib

Numerical simulations of separated flow transition and heat transfer around a two‐dimensional rib mounted in a laminar boundary layer were performed. The separated shear layer becomes unstable due to the Kelvin–Helmholtz instability and generates a two‐dimensional vortex. This vortex becomes three‐dimensional and collapses in the downstream part of the separation bubble. As a result, transition from laminar to turbulent flow occurs in the separated shear layer. Streamwise vortices exist downstream of the reattachment flow region. The low‐frequency flapping motion and transition of the separated shear layer are influenced by three‐dimensional dynamics upstream of the separation bubble. Large‐scale vortices around the reattachment flow region have substantial effects on heat transfer. Downstream of the reattachment point, the surface friction coefficient and Nusselt number are different from their profiles in the laminar boundary layer and approach the distributions seen in the turbulent boundary layer. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(8): 513–528, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20177     

燃料挥发性对柴油机性能及排放的影响

针对不同的发动机热状态及压缩比，试验研究了燃料物化特性对柴油机稳态及过渡工况下性能、排放的影响规律。应用自行开发的柴油机过渡工况控制系统及排气采集装置，模拟车用柴油机实际工作时的加速状态，对具有相同十六烷值但有不同挥发性能燃料的HC排放特性进行了研究，利用气相色谱仪对HC排放成分进行了分析。研究结果表明，采用挥发性好的燃料，可有效降低排气烟度，提高有效热效率，在发动机热状态不好及压缩比较低等燃烧条件恶劣、HC排放高的情况下，可有效地降低HC排放。     

Risk hedging against the fuel price fluctuation in energy service business

Energy service business, or energy service company (ESCO), is expanding among industrial users as a means of energy saving. The ESCO business normally tends to become a long-term operation. During the operation, fluctuations of fuel and electricity costs significantly impact on the stability of the profit from ESCO business. Therefore, it is essential to reduce the risk of fuel and electricity cost fluctuations. Generally, a transaction called “financial derivative” is used as a measure of hedging against the fuel price fluctuation. In the case of ESCO business, it is necessary to manage the risk of both electricity and fuel price fluctuations because the variation in electricity price strongly affects the profit from ESCO as that in fuel price does.     

Measurements, analyses and evaluation of residential PV systems by Japanese monitoring program

This paper is about measurements, analyses and evaluation of residential PV systems in the Japanese Monitoring Program, on which JQA was subsidized by NEDO (New Energy Development and Industrial Technology Organization) that is currently proceeding [NSS R&D] from FY1997 to FY 2000.The aim of this investigation refers, through the data evaluation and analyses, to obtain knowledge required for optimizing design of PV systems, such as system performance, characteristics and regional dependency under practical operation and to develop the system evaluation technology on the design parameter method.     

Environmental ecological modeling of human blood lead levels in East Asia

Environmental ecological modeling (EEM), which unifies models simulating transport of chemicals and exposure of humans to chemicals, was used to simulate long-term trends of female adult human blood lead levels (BLLs) and historical exposure to the atmospheric lead in four East Asian countries: Japan, Korea, China, and Vietnam. Anthropogenic lead emissions to the atmosphere in Vietnam were estimated from energy statistics to be 1931 t yr(-1). Calculated BLLs generally agreed with those observed in samples collected in these countries as the error factors were less than 2. The model results revealed that BLLs decreased significantly in Tokyo (by 58%) and Seoul (by 45%) in recent decades and confirmed the effects of efforts to reduce environmental lead in Japan and Korea. The model results also revealed that BLLs in Beijing did not decrease in this decade as much as in Tokyo and Seoul, despite the phasing out of leaded gasoline, and that the contribution from the atmospheric component was increasing (43% in 2009). Finally, we applied EEM to simulate BLLs of children in Hanoi. The probability of children having BLLs greater than 50 μg L(-1) was 7.5%, which was greater than those observed in developed countries.     

Computational Fluid Dynamics Benchmark of an Impulse Turbine with Fixed Guide Vanes

This paper presents the comparison of a three dimensional Computational Fluid Dynamics (CFD) analysis with empirical performance data of a 0.6 m impulse turbine with fixed guide vanes used for wave energy power conversion. Pro-Engineer, Gambit and Fluent 6 were used to create a 3-D model of the turbine. A hybrid meshing scheme was used with hexahedral cells in the near blade region and tetrahedral and pyramid cells in the rest of the domain. The turbine has a hub-to-tip ratio of 0.6 and results were obtained over a wide range of flow coefficients. The model yielded a maximum efficiency of approximately 54% as compared to a maximum efficiency of around 49% from experiment. A degree of insight into flow behaviour, not possible with experiment, was obtained.     

Reaction Sintering of Cubic Boron Nitride Using Volatile Catalysts

Reaction sintering behavior of cBN, which is accompanied by the transformation from hBN to cBN in the presence of 30 wt% diamond seed grains, was investigated under high pressure conditions (6.0–7.5 GPa, 1400–1700°C, 0–30 min) using volatile catalysts such as NH₄NO₃, NH₄Cl, and NH₂NH₂. Fully dense sintered compacts having a Vickers microhardness of more than 5000 kg/mm² were prepared with no residual catalytic solid components. The activation energy for the conversion from hBN to cBN was 200–230 kJ/mol. Adsorbed N₂, H₂, and/or NH _x components which were formed by decomposition of these catalysts during high pressure and temperature treatments, would have a favorable kinetic effect on cBN formation from hBN and its simultaneous sintering.     

Dynamics of Hollow and Solid Alumina Particle Formation in Spray Flames

Thermophoretic sampling (TS) of the aerosol was conducted to manifest the formation of hollow and solid alumina particles in spray flames. The collected particles were investigated by transmission electron microscopy. Hollow particles with a thin shell (e.g., 10 nm) were formed from the aluminum nitrate precursor emulsion at less than 4-cm flame height. Hollow particles maintained their shapes in the flame using air as dispersion/oxidant gas, whereas hollow-to-solid restructuring of the particles took place in the flame using oxygen. With oxygen, nanoparticles were formed in the gas phase from the aluminum butoxide/2-propanol precursor solution only, whereas gas-phase reaction was hindered, forming large particles from the aluminum nitrate/2-propanol precursor solution.