A phenolic antioxidant from the Pacific oyster (Crassostrea gigas) inhibits oxidation of cultured human hepatocytes mediated by diphenyl-1-pyrenylphosphine

3,5-Dihydroxy-4-methoxybenzyl alcohol (DHMBA), an antioxidant isolated from the Pacific oyster (Crassostrea gigas), was studied in a cell-based fluorometric antioxidant assay using human hepatocyte-derived cells (C3A) and diphenyl-1-pyrenylphosphine (DPPP) as a fluorescent probe. In comparison with two hydrophilic antioxidants, DHMBA showed the stronger inhibition of DPPP-mediated fluorescence than chlorogenic acid and l-ascorbic acid: at a concentration of 320 μM of DPPP, the inhibition was 26.4 ± 2.6%, 11.1 ± 1.2%, and 0 ± 2.0% for DHMBA, chlorogenic acid, and l-ascorbic acid, respectively (mean ± SD, n = 4). Their relative oxygen radical absorbance capacities (ORAC) were dissociated with their cell-based antioxidant activities: 1.47 ± 0.40, 4.57 ± 0.30, and 0.53 ± 0.13 μmol TE/μmol for DHMBA, chlorogenic acid, and l-ascorbic acid, respectively (mean ± SD, n = 4). The amphiphilicity of DHMBA was better than chlorogenic acid and l-ascorbic acid might underlie this dissociation. Since the C3A cells are human hepatoma-derived cells, DHMBA might be useful in the prevention and treatment of liver diseases by involving an oxidation process.     

Performance of an impulse turbine with fixed guide vanes for wave power conversion

A simple fixed geometry impulse turbine has been studied as a suitable power converter in Oscillating Water Column based wave power plants. Comparison with the Wells turbine, which is the commonly used self-rectifying turbine in such applications, shows it to be superior in performance under irregular flow conditions. Optimum guide vane angle for maximum efficiency has been arrived at based on the five angles tested.     

Rotating fullerene chains in carbon nanopeapods

The rotation of fullerene chains in SWNT peapods is studied using low-voltage high resolution transmission electron microscopy. Anisotropic fullerene chain structures (i.e., C300) are formed in situ in carbon nanopeapods via electron beam induced coalescence of individual fullerenes (i.e., C60). A low electron accelerating voltage of 80 kV is used to prevent damage to the SWNT. The large asymmetric C300 fullerene structure exhibits translational motion inside the SWNT and unique corkscrew like rotation motion. Another asymmetric fullerene chain containing mixed fullerene species is prepared by fusing smaller C60 fullerenes to a larger Sc@C82 fullerene, and this also exhibits corkscrew rotational motion. Chains of Sc3C2@C80 in SWNT peapods adopt a zigzag packing structure, and the entire zigzag chain rotates inside the SWNT to induce structural modifications to the SWNT diameter and cross-sectional shape of the SWNT. The expansion and contraction of the diameter of the SWNT is measured as 17%, demonstrating nanoactuation behavior in carbon nanopeapods.     

Preparation of poly(1,4‐cyclohexylenedimethylene phthalate)s and their use as modifiers for aromatic diamine‐cured epoxy resin

Poly(1,4‐cyclohexylenedimethylene phthalate) s, prepared by the reaction of phthalic anhydride and 1,4‐cyclohexane dimethanol (35/65 or 73/27 mol % cis/trans or trans alone), have been used to improve the toughness of bisphenol‐A diglycidyl ether epoxy resin cured with 4,4′‐diaminodiphenyl sulfone. The aromatic polyesters include poly(cis/trans‐1,4‐cyclohexylenedimethylene phthalate) (PCP) based on a commercial cyclohexanedimethanol, poly(trans‐1,4‐cyclohexylenedimethylene phthalate) (trans‐PCP) and poly(cis/trans‐1,4‐cyclohexylenedimethylene phthalate) (cis‐rich PCP) prepared from a cis‐rich diol. The polyesters used were soluble in the epoxy resin without solvents and were effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt% of PCP (MW 6400 g mol⁻¹) led to an 80% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of morphological and dynamic viscoelastic behaviours of the modified epoxy resin system. © 2000 Society of Chemical Industry     

Fabrication and properties of one-mask-patterned ferroelectric integrated capacitors

A one-mask-patterned ferroelectric capacitor test structure designed with a 0.5-μm feature size was fabricated. Oxygen plasma treatment after dry etching decreased the leakage current to as low as that of as-deposited film. These one-mask-patterned ferroelectric capacitors, with switching charge almost equal to as-deposited film, were successfully fabricated. Ferroelectric memories as dense as dynamic random access memories will become possible with this technology. However, the leakage current density for micron-sized capacitors is 2 to 10 times that of large capacitors. The leakage current in small capacitors is increased due to perimeter leakage that runs through the damaged region on the capacitor sidewall. © Scripta Technica, Inc. Electr Eng Jpn, 121(1): 43–50, 1997     

The effect of ZDDP in CVT fluid on increasing the traction capacity of belt-drive continuously variable transmissions

Belt-drive continuously variable transmissions are already being increasingly used in Europe and Japan for small vehicles, but midsize vehicles will require greater torque capacity. This paper discusses the effect of ZDDP as an additive on increasing the traction obtained at the sliding interfaces between the elements and pulleys of a belt-drive continuously variable transmission (B-CVT). This effect stems from the higher friction coefficient at the sliding interfaces. Friction coefficients were measured in rig tests in which test pieces cut from actual CVT elements were slid against a disc in different types of CVT fluid (CVTF). After the tests, the adsorbed films on the specimen surfaces were investigated with electron probe microanalysis (EPMA), and compared with pieces cut from elements subjected to a high torque test conducted with the B-CVT. The experimental results indicated that the higher friction coefficient at the sliding interfaces was due to the shearing of the tough adsorbed film. The film was blue in colour, and consisted mainly of zinc precipitated from the ZDDP additive.     

Glass capillary optics for producing nanometer sized beams and its applications

We have developed a method to produce micro/nano meter sized beams of keV energy highly charged ions (HCIs) and MeV energy protons/He ions with tapered glass capillary optics for application of surface modifications and a biological tool called “cell surgery”, respectively. The transmission through the tapered glass capillaries with inlet diameter of 0.8 mm?, outlet diameter from 900 nm? to several tens of microns and length of about 50 mm was performed using 8/64 keV Ar⁸⁺ beams. The transmitted beams had a density enhancement of about 10 and were guided through a capillary tilted by as large as ±100 mrad. The charge state of the beams was kept during the transmission. The combination of MeV proton/He ion beams and the capillary with a thin end window at its outlet can realize pinpoint energy deposition and three-dimensional selection of the bombarding point in an arbitrary position of a living cell or in any liquid object. We demonstrated that a real biological cell, HeLa cell with the nucleus labeled by green fluorescent protein (GFP), was irradiated with the microbeam, which was prepared by 4 MeV He²⁺ entering a capillary with an end window of 7.3 μm in thickness and outlet diameter of 9.6 μm?. The transmitted MeV ion beams had density enhancement up to 1000 according to the capillary outlet sizes, which are applicable to various material analyses employing microbeams.     

Developments in asymmetric hydrogenation from an industrial perspective

Examples of developments in asymmetric hydrogenation from various perspectives, in an effort to improve efficiency, are reported. Discussed in this Account are (1) the improved synthesis of BINAP ligands, (2) the design of SEGPHOS ligands for higher enantioselectivity, (3) a new protocol with fewer reaction steps to synthesize beta-aminoesters, and (4) a novel asymmetric hydrogenation mediated by a copper catalyst.