热扩散塔分离甲烷和氢的实验研究

引言用甲烷直接合成C_2以上的碳氢化合物非常困难,例如,由甲烷脱氢合成乙烯,按热力学计算在1000K下甲烷的平衡转化率只有4.8％,所以至今甲烷仍主要用作燃料．为了充分利用这一化工基础原料,作者利用热扩散塔进行了甲烷的催化脱氢反应,使反应与分离同时进行,大幅度提高了甲烷的转化率．为考察热扩散的分离效果,本文用甲烷脱氢反应的主要成分甲烷和氢混合物为原料,在热扩散塔中分别进行了空塔和填料塔的热扩散分离实验,考察了一些操作参数对分离效果的影响,以期对反应操作条件提供必要的参考．l原理所谓热扩散现象,就是在温度场…     

Reverse‐Offset Printed Ultrathin Ag Mesh for Robust Conformal Transparent Electrodes for High‐Performance Organic Photovoltaics

Mechanically durable transparent electrodes are needed in flexible optoelectronic devices to realize their long‐term stable functioning, for applications in various fields such as energy, healthcare, and soft robotics. Several promising transparent electrodes based on nanomaterials have been previously reported to replace the conventional and fragile indium‐tin oxide (ITO); however, obtaining feasible printed transparent electrodes for ultraflexible devices with a multistack structure is still a great challenge. Here, a printed ultrathin (uniform thickness of 100 nm) Ag mesh transparent electrode is demonstrated, simultaneously achieving high conductance, high transparency, and good mechanical properties. It shows a 17 Ω sq^?1 sheet resistance (R_sh) with 93.2% transmittance, which surpasses the performance of sputtered ITO electrodes and other ultrathin Ag mesh transparent electrodes. The conductance is stable after 500 cycles of 100% stretch/release deformation, with an insignificant increase (10.6%) in R_sh by adopting a buckling structure. Furthermore, organic photovoltaics (OPVs) using our Ag mesh transparent electrodes achieve a power conversion efficiency of 8.3%, which is comparable to the performance of ITO‐based OPVs.     

Calcium phosphates formation on CaTiO<Subscript>3</Subscript> coated titanium

In this study, performance of calcium phosphate formation of CaTiO₃ coating film on Ti in Hanks’ balanced saline solution (HBSS) was investigated. CaTiO₃ thin films with a thickness of 50 nm were deposited on Ti using radiofrequency (RF) magnetron sputtering. The temperature of Ti substrate was adjusted to room temperature (RT) and 873 K. Thereafter, the specimens deposited at RT were annealed at 873 K in air for 7.2 ks. The films were characterized by grazing incident angle X-ray diffractometry (GI-XRD) and X-ray photoelectron spectroscopy (XPS). After immersion in HBSS for 60 d, on CaTiO₃ coated Ti, the formation of hydroxyapatite (HAP) was observed. Furthermore, HAP layer formed was thicker on the specimen on which CaTiO₃ film was deposited at RT and annealed than that prepared at 873 K. The major difference between both specimens was the chemical properties of the outermost surface. In summary, CaTiO₃ thin film deposited at RT and followed by annealing at 873 K for 7.2 ks in air enhances calcium phosphate formation ability on Ti.     

Hypomagnesemia as a predictor of mortality in hemodialysis patients and the role of proton pump inhibitors: A cross‐sectional, 1‐year,retrospective cohort study

Introduction This study aimed to evaluate the association between proton pump inhibitor (PPI) use and serum magnesium levels, and the role of hypomagnesemia and PPI use as a risk factor for mortality in hemodialysis patients. Methods An observational study, including a cross‐sectional and 1‐year retrospective cohort study. The study comprised 399 hemodialysis patients at a single center, and was conducted from January to September 2014. Multiple linear regression analysis was used to investigate the independent relationship between serum magnesium levels and baseline demographic and clinical variables, including PPI and histamine‐2 receptor antagonist use. Cox regression model was used to identify lower serum magnesium level and PPI as a predictor of 1‐year mortality. Findings Serum magnesium levels were lower with PPI use than non‐PPI use (2.39 ± 0.36 vs. 2.56 ± 0.39 mg/dL, P < 0.001). Multiple linear regression analysis showed that PPI use, low serum albumin levels, and low serum potassium and high‐sensitivity C‐reactive protein (hs‐CRP) levels were significantly associated with low serum magnesium levels. A total of 29 deaths occurred during the follow‐up period. According to Cox regression analysis stratified by hs‐CRP, only high serum hs‐CRP levels (>4.04 mg/L) in association with low serum magnesium levels was an independent risk factor for 1‐year mortality (hazard ratio: 2.92; 95% CI: 1.53–6.40, P < 0.001). Discussion Serum magnesium levels are lower in PPI use. In the inflammatory state, a low serum magnesium level is a significant predictor of mortality in hemodialysis patients.     

Effect of oxygen on the wettability of sapphire by liquid palladium

The surface tension of liquid palladium and the contact angle between liquid palladium and sapphire have been measured at 1833 K as a function of oxygen pressure by the sessile drop method. Oxygen acted as a surface-active element on the surface of liquid palladium and at the interface between liquid palladium and sapphire, resulting in the decrease of the surface tension and the contact angle. The work of adhesion calculated from their values increased with increasing oxygen pressure, and had a constant value above 400 Pa. The maximum excess concentration of oxygen was estimated to be 7.3×10^–6 mol m^–2 for the surface and 6.9×10^–6 mol m^–2 for the interface.     

Mass recovery adsorption refrigeration cycle—improving cooling capacity

The study investigates the performance of two-bed, silica gel-water adsorption refrigeration cycle with mass recovery process. The cycle with mass recovery can be driven by the relatively low temperature heat source. In an adsorption refrigeration cycle, the pressures in adsorber and desorber are different. The chiller with mass recovery process utilizes the pressure difference to enhance the refrigerant mass circulation. Cooling capacity and coefficient of performance (COP) were calculated by cycle simulation computer program to analyze the influences of operating conditions. The mass recovery cycle was compared with conventional cycle such as the single stage adsorption cycle in terms of cooling capacity and COP. The results show that the cooling capacity of mass recovery cycle is superior to that of conventional cycle and the mass recovery process is more effective for low regenerating temperature.