Isolation and characterization of poly(butylene succinate-co-butylene adipate)-degrading microorganism

Poly(butylene succinate-co-butylene adipate) (PBSA)-degrading bacterium, strain 1-A, was isolated from soil. Strain 1-A was identified as Bacillus pumilus on the basis of its physiological properties and partial 16S rRNA gene sequence. Strain 1-A also degraded poly(butylene succinate) (PBS) and poly(epsilon-caprolactone). On the other hand, poly(butylene adipate terephthalate) and poly(lactic acid) were minimally degraded by strain 1-A. The NMR spectra of degradation products from PBSA indicated that the adipate units were more rapidly degraded than 1,4-butanediol and succinate units. This seems to be one of the reasons why strain 1-A degraded PBSA faster than PBS.     

A unified adaptive oculomotor control model

In order to understand mechanisms of oculomotor control systems, an oculomotor model based on eye's anatomical structure and physiological mechanism is developed. In this model, various types of eye movements are considered, and two learning systems, one based on adaptive characteristics of flocculus and the other on vestibular nuclei's are developed. The role of neural paths from ocular muscle stretch receptors into flocculus, which were thought to not contribute in eye movement, is discussed in detail from the viewpoint of system control engineering. The experimental results through simulation show good control performance of the proposed model. Copyright © 2001 John Wiley & Sons, Ltd.     

The use of indoline dyes in a zinc oxide dye-sensitized solar cell

The effects of the position and the type of carboxyl anchor group in double rhodanine-type indoline dyes on the performance of a zinc oxide dye-sensitized solar cell were examined. The optimum position for the carboxymethyl group was on the inner rhodanine moiety; a carboxymethyl group gave optimum results among carboxymethyl, -ethyl, and -propyl derivatives.     

Overcharge protection effect and reaction mechanism of cyclohexylbenzene for lithium ion batteries

We studied the relationship between the structure of aromatic compounds and the overcharge protection effect, using cyclohexylbenzene, isopropylbenzene, and toluene as the overcharge protection agents. Cyclohexylbenzene proved to be the most effective overcharge protection agent among these aromatic compounds. The effect is enhanced using a higher concentration of cyclohexylbenzene and elevated temperatures. The reaction product of cyclohexylbenzene was analyzed using field desorption mass spectrometry to elucidate its reaction mechanism. The results suggested that some of the overcharge reaction products of CHB were more reactive than that of IPB, which is consistent with the better suppressing effect on overcharging of the active material in the positive electrode.     

Deformation Mechanism in the Crack-Tip Region of Fine-Grained Magnesium Alloy

The deformation mechanism in the crack-tip region of a fine-grained Mg-2.4 at. pct Zn binary alloy was investigated by focused ion beam (FIB) and transmission electron microscopy (TEM) observation and finite element analysis (FEA) at the beginning of the fracture toughness test. The deformed microstructure observations showed the formation of subgrains instead of deformation twins in the fracture toughness tested sample, which was performed at a conventional crosshead speed of 1 mm/min. By preventing the formation of deformation twins at the beginning of the test, the crack tip of the fine-grained magnesium alloys became blunted, and thus, the alloys obtained high fracture toughness. Finite element results showed that the temperature increased 50 to 110 K, and the strain rate became two orders of magnitude higher; however, this temperature increment was not sufficient to form high-angle grain boundaries, i.e., a complete occurrence of dynamic recrystallization. On the other hand, the deformed microstructure observations in the sample, which was tested at a crosshead speed of 50 mm/min, showed the formation of nano-order {10-12} deformation twins and subgrains. The formation of deformation twins was caused, in part, by the severe strain from the operation of a high strain rate in the crack-tip region.     

Arraying needle-like TiO2 particles in a composite film by applying ac bias and its transmittance anisotropy

In an effort to improve energy-efficient windows, we experimented with a precursor slurry composite by using needle-like TiO₂ particles as the filler in a urethane matrix. Applying dc bias to the slurry failed to array the needle-like particles in the composite and to deposit on the film surface because of electrophoretic movement. However, applying ac bias of ±5 V to the precursor slurry composite for 12 h resulted in the needle-like TiO₂ particles being arrayed in the composite in a direction normal to the film surface. This resulted in an improvement in the energy efficiency of the material through an angular dependence of transmittance in the visible–near-infrared range.     

Noninvasive subsurface analysis using multiple miniaturized Raman probes, part I: basic study of thin-layered transparent models of biomedical tissues

This study describes a basic theory for reconstructing pure Raman signals of materials composing a multilayer sample from Raman spectra obtained using two types of miniaturized Raman probes. An illustrative example is demonstrated using a multilayer system of samples composed of the transparent plastics polymethylmethacrylate (PMMA) and polyethylene (PE) as a model of thin-layered biomedical tissues. When the same region of an object is measured using Raman probes with different focal properties, the Raman spectra provide different depth profile information depending on the level of light penetration. Thus, a detailed comparison of the spectra can provide an interesting opportunity to probe the differences between the layers. A simple analytic form is presented for reconstructing the pure Raman spectra of the embedded layer. The method applies an understanding of the Raman sampling volume in layered transparent materials to the interpretation of Raman spectra experimentally measured by multiple probes. The basic theory described here is necessary for the expansion of the technique to turbid media, such as biological samples, where light-scattering effects must be considered. The potential applications of the proposed method include material and catalyst subsurface probing through different embedded materials, such as assessment of silicon wafers, effective noninvasive screening for catalyst synthesis, and biomedical tissue research.     

Crosslinking of PVC and NBR blends

The purpose of our work is to control the interfacial bonds between PVC and NBR using the ammonium salts of triazine thiols and dithiodimorpholine (DTDM) and thereby reveal the relation between the interfacial bonds and the final mechanical properties of products. In the experimental work a two-stage process was used. At first, an NBR/PVC blend was mixed with a mono-tetra-n-butylammonium salt of triazine trithiol at a temperature of 100°C on a two-roll mill to give the branching structure of triazine thiols into PVC. In the second stage branched NBR/PVC reacted with DTDM to afford the branched PVC containing trithiomorphonyl groups. In the presence of ZnO at 160°C trithiomorphonyl groups react with NBR to form a crosslinking structure between NBR and PVC. The mechanical properties of cured NBR/PVC blends were markedly improved by the treatment process and after addition of tetramethylthiuram monosulphide also. The mechanical properties were not improved by increasing the concentration of TT-TBA (tetrabutylammonium salt of 1,3,5-triazine-2,4,6-trithiol) over 4.2 phr.