Different Directions of Switching of Chromium Oxide Thin Films

We have investigated the switching behavior of as-deposited CrO _x and post-annealed CrO _y films by use of a variety of electrodes (top electrode Ag, Ti; bottom electrode Pt, fluorine tin oxide (FTO)). Resistance switching is highly dependent on electrode material and post-annealing treatment. Among Pt devices, I–V hysteresis was observed for the Ag/CrO _x /Pt device only; no resistance switching was observed for Ag/CrO _y /Pt, Ti/CrO _x /Pt, and Ti/CrO _y /Pt devices. Among FTO devices, I–V hysteresis was observed for the Ag/CrO _x /FTO device whereas I–V hysteresis with the opposite switching direction was observed for Ag/CrO _y /FTO, Ti/CrO _x /FTO, and Ti/CrO _y /FTO devices. The direction of switching depends not only on electrode material but also on post-annealing treatment, which affects the density of grain boundaries. Thus, the density of grain boundaries determines the type of charge carrier involved in the switching process. For as-deposited CrO _x films with a high density of grain boundaries Ag filament paths mediated by electrochemical redox reaction were observed, irrespective of bottom electrode material (Pt or FTO). Post-annealed CrO _y films with a low density of grain boundaries suppressed electrochemical redox reaction in the Ag/CrO _y /Pt device but promoted short-range movement of O^2? ions through the bottom interface, resulting in resistance switching in the Ag/CrO _y /FTO device. Electrochemical redox reaction-controlled resistance switching occurred solely in oxides with a high density of grain boundaries or dislocations.     

Novel portable electrical detection system for DNA SENSOR application

A novel, portable, electrical detection system was constructed for DNA sensor application to detect DNA hybridisation. The read-out circuit consists of an analogue circuit and a digital circuit. The analogue circuit with an IC MAX038 generates a sine wave with a constant frequency (10?kHz), which serves as the input for the DNA sensor. The DNA sensor consists of active and reference sensors. DNA hybridisation between the DNA probe and the target sequences causes changes in the conductance of the conductive membrane (DNA/MWCNTs) on the sensor surface, which lead to changes in the amplitude of the sine wave from the sensor output compared with that of the reference signal output (input sine wave). We used a digital circuit with a microprocessor (PIC33FJ256MC710) to determine the change in the amplitude of the sine wave signal of the sensor. From these digital data, the difference in the amplitudes of the active and reference sensors was calculated and displayed on the liquid crystal display. Measurement results show that the portable electrical detection system can detect DNA target concentrations as low as 0.16?µM. The detection of the amplified polymerase chain reaction sample and the reproducibility of the DNA sensor results were also determined using the designed readout circuit. The proposed electrical detection system is suitable for DNA sensor application.     

Cross-Layer Design for MRT Systems with Channel Estimation Error and Feedback Delay

Multiple-input multiple-output (MIMO) beamforming is a joint spatial diversity scheme applied in frequency selective channels to enhance system performance. In uplink transmission, the impact of correlation of path gains and mutual coupling at transmitters cannot be ignored because of the size constraint on mobile terminals. In this paper, an iterative MIMO beamforming algorithm with maximal ratio transmit-maximal ratio combining (MRT-MRC) strategy is presented to improve the output signal-to-noise and interference ratio in the presence of spatial correlation and mutual coupling between transmit elements. To reduce the complexity of systems, we also propose an equal gain transmit-maximal ratio combining (EGT-MRC) scheme. In contrast to MRT-MRC scheme, this algorithm can provide better system performance. The results of numerical simulations verify the advantages of this scheme.     

Antibiotic contamination and occurrence of antibiotic-resistant bacteria in aquatic environments of northern Vietnam

The ubiquitous application and release of antibiotics to the environment can result in bacterial antibiotic resistance, which in turn can be a serious risk to humans and other animals. Southeast Asian countries commonly apply an integrated recycling farm system called VAC (Vegetable, Aquaculture and Caged animal). In the VAC environment, antibiotics are released from animal and human origins, which would cause antibiotic-resistant bacteria (ARB). This study evaluated occurrence of ARB in the VAC environment in northern Vietnam, with quantitative analysis of antibiotic pollution. We found that sulfonamides were commonly detected at all sites. In dry season, while sulfamethazine was a major contaminant in pig farm pond (475-6662 ng/l) and less common in city canal and aquaculture sites, sulfamethoxazole was a major one in city canal (612-4330 ng/l). Erythromycin (154-2246 ng/l) and clarithromycin (2.8-778 ng/ml) were the common macrolides in city canal, but very low concentrations in pig farm pond and aquaculture sites. High frequencies of sulfamethoxazole-resistant bacteria (2.14-94.44%) were found whereas the occurrence rates of erythromycin-resistant bacteria were lower (< 0.01-38.8%). A positive correlation was found between sulfamethoxazole concentration and occurrence of sulfamethoxazole-resistant bacteria in dry season. The sulfamethoxazole-resistant isolates were found to belong to 25 genera. Acinetobacter and Aeromonas were the major genera. Twenty three of 25 genera contained sul genes. This study showed specific contamination patterns in city and VAC environments and concluded that ARB occurred not only within contaminated sites but also those less contaminated. Various species can obtain resistance in VAC environment, which would be reservoir of drug resistance genes. Occurrence of ARB is suggested to relate with rainfall condition and horizontal gene transfer in diverse microbial community.     

Mechanism of Crystallization and Implications for Charge Transport in Poly(3‐ethylhexylthiophene) Thin Films

In this work, crystallization kinetics and aggregate growth of poly(3‐ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X‐ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time‐dependent, field‐effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter‐aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.     

Dimerization of native myosin LC2(RLC)-free subfragment 1 from adult rabbit skeletal muscle

We reinvestigated whether the native myosin LC2-free-subfragment 1 (S1) dimer exists by using viscometry, capillary electrophoresis, and laser light scattering. We found that the intrinsic viscosity of the monomer is [eta]m = 6.7 cm3/g and its translation diffusion coefficient is (c = 0) = 4.43 x 10(-)7 cm2/s. For the dimer, [eta]d = 19.8 cm3/g and (c = 0) = 2.54 x 10(-)7 cm2/s. Using the Svedberg equation and introducing the values of the sedimentation coefficients (5.05 S for the monomer and 6.05 S for the dimer), we find the following molecular weights: Mr,m = 108 000 Da and Mr,d = 213 000 Da, which agree well with previous determinations. Capillary electrophoresis successfully separated S1(A1) and S1(A2), in a monomer buffer, and S1(A1) and S1(A2) and a heterodimer S1(A1)-S1(A2), in a dimer buffer. An interesting feature of the monomer-dimer equilibrium is the presence of temperature transitions, whose positions and widths depend upon the buffer conditions. At low temperatures, a pure dimer was observed, whereas at high temperatures only the monomer was present. The dimerization site on both myosin and S1 is extremely labile.     

General orthogonality relation for waveguide containing bianisotropic materials

The orthogonality relationship for modes in waveguide containing inhomogeneous bianisotropic materials is derived using the concept of linear operators. The properties of the associated adjoint waveguide are explored. The results are restricted to cases where there exists axial independency of all parameters.