Effects of energetic heavy ion irradiation on the structure and magnetic properties of FeRh thin films

Fe-54at.%Rh thin films were irradiated with 10 MeV iodine ions at room temperature. Before and after the irradiations, the changes in magnetic properties and the lattice structure of the samples were studied by means of a SQUID magnetometer and X-ray diffraction. For the low fluence irradiation, the SQUID measurement at 20 K shows that the anti-ferromagnetic region of the thin film is changed into ferromagnetic region by the irradiation. As the film thickness is much smaller than the ion range, we can discuss the relationship between the density of energy deposited by ions and the change in magnetization quantitatively. For the high fluence irradiation, the magnetization of the film is strongly decreased by the irradiation, which can be explained as due to the change in lattice structure from B2 into A1 structure by the irradiation.     

Cytoskeletal Protein 4.1G Is Essential for the Primary Ciliogenesis and Osteoblast Differentiation in Bone Formation

The primary cilium is a hair-like immotile organelle with specific membrane receptors, including the receptor of Hedgehog signaling, smoothened. The cilium organized in preosteoblasts promotes differentiation of the cells into osteoblasts (osteoblast differentiation) by mediating Hedgehog signaling to achieve bone formation. Notably, 4.1G is a plasma membrane-associated cytoskeletal protein that plays essential roles in various tissues, including the peripheral nervous system, testis, and retina. However, its function in the bone remains unexplored. In this study, we identified 4.1G expression in the bone. We found that, in the 4.1G-knockout mice, calcium deposits and primary cilium formation were suppressed in the trabecular bone, which is preosteoblast-rich region of the newborn tibia, indicating that 4.1G is a prerequisite for osteoblast differentiation by organizing the primary cilia in preosteoblasts. Next, we found that the primary cilium was elongated in the differentiating mouse preosteoblast cell line MC3T3-E1, whereas the knockdown of 4.1G suppressed its elongation. Moreover, 4.1G-knockdown suppressed the induction of the cilia-mediated Hedgehog signaling and subsequent osteoblast differentiation. These results demonstrate a new regulatory mechanism of 4.1G in bone formation that promotes the primary ciliogenesis in the differentiating preosteoblasts and induction of cilia-mediated osteoblast differentiation, resulting in bone formation at the newborn stage.     

A comparison between fission gas release data and FEMAXI-IV code calculations

The FEMAXI-IV code is an extension of the earlier version FEMAXI-III. The primary improvement in the new version is the provision for treating the fuel rod behavior during an operational transient. For this purpose, the time-dependent models are used for heat conduction, fission gas release, and mixing of the released gas with the plenum gas.In FEMAXI-IV, the fission gas release model was thoroughly revised from the previous version. It is based on the fission gas release model presented by White and Tucker. The model takes into account the following mechanisms:

• - diffusion of gas atoms to the grain boundary;

• - sweeping of gas atoms by grain growth;

• - precipitation of gas atoms into intragranular gas bubbles;

• - resolution of gas atoms from intragranular and grain boundary gas bubbles;

• - fission gas release due to bubble interconnection.

The model was incorporated into FEMAXI-IV and code calculations were compared with the fission gas release data obtained in the Inter-Ramp and Over-Ramp experiments.This paper describes the fission gas release model involved and results of calculations.     

Melting attack of solid plates by a high temperature liquid jet — effect of crust formation

When a molten UO₂ jet impinges on a steel structure in a reactor vessel during a severe accident, the erosion rate of the steel by the molten UO₂ jet is expected to be limited considerably by a UO₂ crust layer forming on a molten steel substrate at the jet/steel plate interface. A series of simulation experiments was performed to study the melting behavior of solid plates by high temperature liquid jets and the effects of crust forming at jet/structure interface. In the first series of experiments, salt (NaCl) was selected as the jet material and tin (Sn) as the solid structure. The experiments were conducted with varying the jet diameter (10 30 mm) and jet temperature (900 1100°C). The jets were accelerated to a range of 3 5 m/s at the nozzle outlet by gravitational force and impinged perpendicularly to the solid plate underneath. Furthermore, to check the effects of the thermo-physical properties on the erosion behaviors, preliminary experiments were performed by using a molten Al₂O₃ jet ( 2200°C) impinging on stainless steel plate at room temperature. The erosion rates obtained in the present experiments were far less than the values predicted by an analytical solution that neglects the existence of a crust layer and its thermal effects. With the inclusion of the crust behavior in the model, the experimental results were predicted fairly well. From the present experiments, a Nusselt number of the turbulent heat transfer, which takes into account simultaneous melting and freezing in the impingement region of a molten jet, is correlated by a Reynolds number and a Prandtl number as follows: Nu_m = 0.0033 Re---Pr.In conclusion, the existence of a crust layer plays an important role in the erosion process of a solid plate by the molten fuel jet with high melting point as in a reactor situation.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Ultrasonographic findings of diseases in peripheral lung fields using transtracheobronchial endoscopic ultrasonography (TUS)

Cystic neoplasms of the pancreas constitute about 9% of all cystic lesions of the pancreas and less than 1% of all pancreatic neoplasms. The case of a 70 years-old woman with microcystic cystadenoma is reported. CT-scan of the abdomen diagnosed a 5 cm multilocular septated cyst, with calcifications in the context, localized in the head-uncinate process of the pancreas. The mass was well separated by a sharp cleavage plane with portal vein and superior mesenteric vessels. An ERCP showed cephalic symmetrical stenosis (diameter 3 mm) of the main pancreatic duct (MPD), mildly dilated in the remaining tract (diameter 6 mm). An intraoperative biopsy of the cystic wall was performed. Therefore, it was decided to proceed with a duodenum-preserving resection of the head of the pancreas (DPPHR), including the stenosis tract of the MPD in the surgical specimen. The reconstructive procedure consisted, by i.v. jejunal loop transposition, in a side-to-side pancreatico-jejunostomy, including in the anastomosis both corpocaudal stump and the resection cavity of the pancreatic head, and an end-to-side Roux-en-Y jejuno-jejunostomy. With respect to long-lasting pain relief and preservation of the endocrine and exocrine functions of the pancreas, DPPHR is a highly effective surgical procedure with a low early and late morbidity and mortality due to limited surgical resection. This technique, introduced into surgical practice by Beger, is indicated in patients with chronic pancreatitis with an inflammatory mass in the head of the pancreas. The authors conclude that this procedure can be performed also in case of pancreatic benign tumors, as microcystic cystadenoma. Advantages of this technique makes DPPHR an attractive alternative to Pylorus-Preserving-Pancreatico-Duodenectomy (PPPD).     

Safety evaluation of rechargeable cells with lithium metal anodes and amorphous V2O5 cathodes

Rechargeable cells with lithium metal anodes have a very large theoretical energy density and are a promising cell system. However, rechargeable lithium metal cells are not yet currently commercially available. One of the biggest problems with the cells is the poor safety aspect resulting from the high chemical reactivity of lithium. We have been studying a cell system consisting of an amorphous (a-)V2O5P2O5 (95:5 in molar ratio) cathode, a lithium (Li) metal anode and an organic electrolyte in fabricating an AA-size prototype. In this paper, we report recent progress on our rechargeable lithium metal cell focusing on its safety.     

Reaction and diffusion of reactive disperse dye in nylon 6

The diffusion of a reactive disperse dye with a vinylsulfonyl group accompanied by simultaneous reaction with the amino end groups in nylon 6 was examined by the method of cylindrical film roll at 70°C and pH 2.2–8.0. The experimental diffusion profiles of the active and fixed species of the dye in nylon 6 were confirmed to be described by the diffusion equation accompanied by the chemical reaction with substrate taking the limited amount of the end groups into account, where the active species of dye were assumed to react only with the free base of amino end groups. The completion of the reaction with the amino end groups was observed in the first layer from the surface at pH 6.0–8.0. The value of diffusion coefficient was constant (8.0 × 10^?10 cm²/s) at all the pH's. The product of the second-order rate constant, k₂, of reaction of the dye and the dissociation constant, K_a, of the amino end groups was constant (k₂K_a = 4.0 × 10^?9 s^?1) at pH 2.2–8.0. The k₂ values of the reaction with various substrates for vinylsulfonyl and monochlorotriazinyl-reactive dyes were compared and the practical dyeing conditions were discussed.     

Mechanical properties of DLC films prepared inside of micro-holes by pulse plasma CVD

Diamond-like carbon (DLC) films are metastable amorphous carbon materials with superior tribological characteristics. In order to improve wear resistance of micro-extrusion dies with numerous imperceptible holes, DLC films were deposited on the inner wall surface of model dies with holes of 2 and 0.9 mm in diameter, and 20 mm in depth by using pulse plasma CVD method. This paper will discuss how argon gas, deposition pressure and time affect the characteristics of films deposited on the inner wall surface of dies. This micro-coating method can be applied widely for inner wall surface treatment of components with thin holes.