Isolation of some active compounds from Origanum vulgare L. ssp. vulgare and determination of their genotoxic potentials

Origanum vulgare L. (oregano) is a flavoring herb widely used around the world. In the present study, crude extract of O. vulgare L. (oregano) and its petroleum ether, chloroform, ethyl acetate, n-butanol, water fractions were prepared in order to isolate and investigate antimutagenic compounds from the active extract through the bacterial genotoxicity assay guided fractionation procedures. The methanol extract and its n-butanol fraction showed significant antimutagenic activity. In the end of sub-fractionation process of the n-butanol extract, luteolin 7-O-glucuronide and luteolin 7-O-xyloside were isolated. These compounds showed significant antimutagenic activity against 9-Aminoacridine and N-Methyl-N′-nitro-N-nitrosoguanidine mutagenicity. The inhibition rates ranged from 22.1% (luteolin 7-O-xyloside: Salmonella typhimurium TA1537 – 0.4 mM/plate) to 67.8% (luteolin 7-O-glucuronide: S. typhimurium TA1537 – 0.8 μM/plate). In conclusion, the results revealed that luteolin 7-O-glucuronide and luteolin 7-O-xyloside are two of the antimutagenic compounds of O. vulgare L. ssp. vulgare.     

An equivalent circuit approach to organic solar cell modelling

In this paper, we present a simulation study for a newly prepared organic solar cell, based on a composite of poly (2-methoxy-5-(2′-ethylhexyloxy)-1, 4-phenylenevinylene (MEH-PPV) with [6, 6]-phenyl C₆₀ butyric acid methyl ester (PCBM). Photo-current density vs. voltage (J–V) characteristics, for the cell, which were experimentally studied earlier, have been revisited here. The results indicated that the conduction mechanism in the organic solar cell is strongly influenced by the excitonic diffusion. Sound correlation, between theoretical and experimental photo-current density vs. voltage (J–V) plots, has been achieved. Moreover, the simulation clearly demonstrates that the performance of the tested device can be described, with sound accuracy, by a two-diode-equivalent model.     

Analysis of deposition mechanism during ultrafiltration of glycerin-rich solutions

Clarification of glycerin-rich solution is one of the potential applications of membrane within the oleochemical industry. However, one of the barriers in successfully utilizing the use of membranes such as ultrafiltration (UF) has been due to the fouling. In this work, flux decline during ultrafiltration of the glycerin-rich solutions was studied by using commercialized polymeric polyethersulphone (PES) membrane. Influence of fatty acids as foulants model (palmitic acid, stearic acid and oleic acid), pH of feed solution (3-10) and molecular weight cut-off (5 kDa, 20 kDa and 25 kDa) were analyzed. All the experiments were performed at constant pressure (2 bar) and temperature (40 °C). The Hermia's model was used to analyze the fouling mechanism during the flux decline which involve cake layer model due to adsorption of solute as well as pore blocking model. All the different types of flux decline kinetics were found to occur during the permeation of glycerin-rich solutions. However, the contribution of resistance due to cake layer formation was small for all the conditions studied. The fouling mechanisms were found to depend on the hydrophobicity of the PES membrane itself as well as the nature of foulants used in the study.     

Steam Assisted Hybrid Cooking Behavior of Semitendinosus Muscle: Heterocyclic Amines Formation,Soluble Protein Degradation,Fat Retention,Surface Color,and Cooking Value

Beef (Semitendinosus muscle) was cooked in natural convection, forced convection and steam assisted hybrid oven and saturated steam oven at different oven temperatures until the geometric center of samples reached different end temperatures. Heterocyclic amine (HCA) compounds formation, soluble protein degradation kinetics, cook value, changes in fat content, surface colour and overall acceptance of cooked beef were determined. Soluble protein degradation of beef was considered as first order reaction kinetics and the reaction rate constants, k, were determined in the range of 0.014-0.052 min^?1. In steam assisted hybrid oven had higher reaction rate constants compared to that of the convection ovens. The effect of cooking temperature on soluble protein degradation for natural convection, forced convection and steam assisted hybrid oven followed the Arrhenius type of equation with activation energies of 12.45, 14.57 and 60.16 kJ/mol, respectively. Lower HCAs contents, shorter cooking times, lower cook values and lower fat retention were obtained by steam assisted hybrid oven cooking. Steam assisted hybrid cooking could be considered as an alternative cooking method to obtain a healthier product without compromising the eating habits of conventional methods due to better appearance (moderate burned surface) than saturated steam oven samples and a product retaining the most of the nutritional values.     

In situ stabilization of chromium(VI) in polluted soils using organic ligands: the role of galacturonic, glucuronic and alginic acids

Laboratory batch sorption and column experiments were performed to investigate the role of organic ligands such as galacturonic, glucuronic and alginic acids (main constituents of bacterial exopolymeric substances (EPS)) on Cr(VI) uptake and transport in heterogeneous subsurface media. Our batch sorption experiments demonstrate the addition of galacturonic, glucuronic and alginic acids to soils enhances Cr(VI) uptake by soil at pH values <7.7 depending on the concentration of the ligand and pH used. The enhanced Cr(VI) uptake at pH values <7.7 may be explained through either the catalytic reduction of Cr(VI) to Cr(III) by the surface-bound organic matter/Fe oxides and/or the dissolved metal ions (e.g., Fe(III)) from the soil. On the other hand, organic ligands have no or little effect on Cr(VI) uptake under highly alkaline pH conditions since the catalytic Cr(VI) reduction decreases with increasing pH. Similarly, the results from column experiments show that, depending on the concentration of organic ligands, the Cr(VI) breakthrough curves were significantly retarded relative to the organic acid-free systems at pH 7.6. A significant portion of Cr(VI) initially added to the feed solution was not readily recoverable in the effluent, indicating Cr(VI) reduction in columns, most probably catalyzed by surface-bound metal-oxides (e.g., Fe oxides) or dissolved metal ions such as Fe(II; III). The overall results suggest that EPS constituents such as glucuronic, galacturonic and alginic acids may play a significant role on Cr(VI) stabilization in subsurface systems under acidic to slightly alkaline pH conditions.     

Characterizations of NiCu/Cu Multilayers: Dependence of Nonmagnetic Layer Thickness

A series of NiCu/Cu multilayers were grown on (110) textured polycrystalline Cu substrates from a single electrolyte under potentiostatic deposition conditions. Microstructure, magnetoresistance and magnetic properties of the multilayers were investigated as a function of the nonmagnetic layer thicknesses. The structural studies by X-ray diffraction revealed that the multilayers have face-centered-cubic structure with preferred (110) crystal orientation as their substrates. The composition of the deposits determined by energy dispersive X-ray spectroscopy showed that the Cu content of the films increased as the Cu layer thickness increased. The scanning electron microscope studies showed that samples have homogeneous and smooth surfaces. Multilayers exhibited either anisotropic magnetoresistance (AMR) or giant magnetoresistance (GMR) depending on the non-magnetic Cu layer thickness. The multilayers with Cu layer thickness thicker than 0.7 nm exhibited GMR, but the AMR effect was observed to be dominant for the Cu layer thickness less than 0.7 nm. The GMR curves are broad in shape and the nonsaturated curves indicated the predominance of a superparamagnetic contribution. The GMR magnitudes of NiCu/Cu multilayers are found to be about 1–1.5 %. The vibrating sample magnetometer measurements revealed that the saturation magnetization decrease with increasing nonmagnetic layer thickness. The changes in the magnetic and magnetotransport properties might arise from the change in the Ni and Cu content of the samples caused by the variation of Cu layer thicknesses.     

An Optimized Algorithm for CR-MIMO Wireless Networks

With the rapid development of wireless communication technology, the spectrum resources are increasingly strained which needs optimal solutions. Cognitive radio (CR) is one of the key technologies to solve this problem. Spectrum sensing not only includes the precise detection of the communication signal of the primary user (PU), but also the precise identification of its modulation type, which can then determine the a priori information such as the PU’ service category, so as to use this information to make the cognitive user (CU) aware to discover and use the idle spectrum more effectively, and improve the spectrum utilization. Spectrum sensing is the primary feature and core part of CR. Classical sensing algorithms includes energy detection, cyclostationary feature detection, matched filter detection, and so on. The energy detection algorithm has a simple structure and does not require prior knowledge of the PU transmitter signal, but it is easily affected by noise and the threshold is not easy to determine. The combination of multiple-input multiple-output (MIMO) with CR improves the spectral efficiency and multi-path fading utilization. To best utilize the PU spectrum while minimizing the overall transmit power, an iterative technique based on semidefinite programming (SDP) and minimum mean squared error (MMSE) is proposed. Also, this article proposed a new method for max-min fairness beamforming. When compared to existing algorithms, the simulation results show that the proposed algorithms perform better in terms of total transmitted power and signal-to-interference plus noise ratio (SINR). Furthermore, the proposed algorithm effectively improved the system performance in terms of number of iterations, interference temperature threshold and balance SINR level which makes it superior over the conventional schemes.     

Content authentication and tampering detection of Arabic text: an approach based on zero-watermarking and natural language processing

Pattern Analysis and Applications - Due to the rapid increase in exchange of text information via internet network, the security and the reliability of the digital content has become a major...     

PolyHIPE/pullulan composites derived from glycidyl methacrylate and 1,3‐butanediol dimethacrylate‐based high internal phase emulsions

Highly porous composites of poly(glycidyl methacrylate‐co‐1,3‐butanediol dimethacrylate) and pullulan were prepared as semi‐interpenetrating polymer networks by cross‐linking of high internal phase emulsions (HIPEs). HIPEs were prepared by using an aqueous phase made of pullulan dissolved in deionised water. Instead of conventional cross‐linkers such as divinyl benzene, 1,3‐butanediol dimethacrylate was used as a flexible co‐monomer. Morphological and mechanical properties of the porous composites with an initial pullulan loading ranging from 1 to 10 wt % have been investigated. Resulting composites were tested in terms of uniaxial compression stress and it was found out that the use of pullulan and flexible co‐monomer in the HIPE preparation increases the compression modulus from 13.53 to 30.8 MPa. Textural analyses of the resulting composites show that in all cases open cellular foams composed of primary cavities (～112–74 μm) connected with secondary interconnected pores were produced with a specific surface area in the range of 1.7–3.0 m² g^?1. In addition, the influence of using porogen in the oil phase was investigated. It was found that using a porogen reduces the cavity size diameter from ～112 to 20 µm and increases the compression modulus from 13.53 to 47.06 MPa. POLYM. ENG. SCI., 55:2636–2642, 2015. © 2015 Society of Plastics Engineers