Creation of Superhydrophobic Electrospun Nonwovens Fabricated from Naturally Occurring Poly(Amino Acid) Derivatives

Creation of superhydrophobic materials bio‐inspired by nature fascinates many scientists. One of the most intriguing challenges in this field is the fabrication of these materials using biopolymers from the viewpoint of green chemistry and environmental chemistry. Here, superhydrophobic and biodegradable nonwovens are constructed by electrospinning from a naturally occurring poly(amino acid), poly(γ‐glutamic acid) (γ‐PGA), modified with a hydrophobic α‐amino acid, l ‐phenylalanine. The contact angle of a water droplet on the materials is 154°, and the droplet remains stuck to the material surface even if it is inverted, clearly indicating a petal‐type superhydrophobic property. Biodegradability and post‐functionalization of the nonwovens as well as cell adhesion on the superhydrophobic materials are also evaluated. As far as we know, this is the first report on biodegradable materials exhibiting a petal‐type superhydrophobicity. The material design and processing shown here can be applied to various bioresources and such functional materials will become a new class of functional materials satisfying some of the requirements in green science.     

Effect of Vacancy Distribution on the Thermal Conductivity of Ga<Subscript>2</Subscript>Te<Subscript>3</Subscript> and Ga<Subscript>2</Subscript>Se<Subscript>3</Subscript>

Our group has focused attention on Ga₂Te₃ as a natural nanostructured thermoelectric material. Ga₂Te₃ has basically a zincblende structure, but one-third of the Ga sites are structural vacancies due to the valence mismatch between Ga and Te. It has been confirmed that (1) vacancies in Ga₂Te₃ exist as two-dimensional (2D) vacancy planes, and (2) Ga₂Te₃ exhibits an unexpectedly low thermal conductivity (κ), most likely due to highly effective phonon scattering by the 2D vacancy planes. However, the effect of the size and periodicity of the 2D vacancy planes on κ has been unclear. In addition, it has also been unclear whether only the 2D vacancy planes reduce κ or if point-type vacancies can also reduce κ. In the present study, we tried to prepare Ga₂Te₃ and Ga₂Se₃ with various vacancy distributions by controlling annealing conditions. The atomic structures of the samples were characterized by means of transmission electron microscopy, and κ was evaluated from the thermal diffusivity measured by the laser flash method. The effects of vacancy distributions on κ of Ga₂Te₃ and Ga₂Se₃ are discussed.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Extraction of lanthanide ions from aqueous solution by bis(2-ethylhexyl)phosphoric acid with room-temperature ionic liquids

Extractions of five kinds of lanthanide metal ions by bis(2-ethylhexyl)phosphoric acid (DEHPA) with [1-Cn-3-methylimidazolium][PF₆](Cn = C₂, C₄) or [1-butyl-4-methylpyridinium][PF₆] were carried out under various DEHPA and HNO₃ concentrations from 0 to 1 M and under different temperature conditions from 298 to 333 K. These results were compared with those using the conventional organic solvent, hexane, in terms of their distribution coefficient values. Under all of the conditions in this study, the ionic liquid system shows more than three times greater extractability for lanthanide compared to when hexane was used. The distribution coefficient of lanthanide ions decreased as the length of the alkyl chain increased from the ethyl to the butyl. In addition, the imidazolium cation generally shows a higher distribution coefficient compared to the pyridinium cation in an ionic liquid. The concentration ratio of lanthanides and DEHPA resulted in an extraction affinity transition for lanthanides. Also evaluated in this study were issues related to the selectivity associated with the lanthanide mixture and the dependency of the ionic radius during lanthanide extraction.     

Determination of dissolved natural thorium and uranium in Horonobe and Mizunami Underground Research Laboratory groundwater and its thermodynamic analysis

At two underground research laboratories situated at Horonobe and Mizunami, Japan, trace amounts of natural thorium and uranium dissolved in deep groundwater were investigated with the help of chemical pre-concentration method. The groundwater was sampled from underground boreholes under the geochemical condition of no atmospheric exposure, and the colloid contribution was checked by in situ two size-fractionated ultrafiltration systems. A rough decrease by half in the concentration after in situ filtration suggested the presence of natural colloids and suspended matter that were carriers of a portion of the elements. The Th and U concentrations in groundwater after 10 kDa filtration was evaluated as dissolved species, and was identified thermodynamically using existing hydrogeological and geochemical data, such as the mineral components in the groundwater at a given pH, ionic strength, concentration of co-existing ions, redox potential, and a hypothetical solubility-limiting solid phase. The crystalline solid phase of tetravalent thorium and uranium dioxides made the solubility very low compared with that of the amorphous phase.     

Method for altering deformational characteristics of controlled-clearance piston-cylinders

A new controlled-clearance pressure balance has been developed to improve the hydraulic pressure standard for pressures up to 1 GPa. For several controlled-clearance (CC) piston-cylinders, characterization experiments based on the Heydemann-Welch (H-W) model were performed to estimate the pressure dependence of the effective area. The results of the experiments, specifically, the changes in the piston fall-rate and the generated pressure in response to the applied jacket pressure, are summarized for CC piston-cylinders of different pressure ranges. At pressures higher than a few hundred MPa, the characteristics of some piston-cylinders differed from those predicted by the H-W model. In this paper, a method for altering the deformational characteristics of CC piston-cylinders is examined. It was found that adjusting the area of the outer surface of the cylinder to which the jacket pressure is applied is an effective method for obtaining deformational characteristics that satisfy the conditions of the H-W model.     

Effects of plating factors on morphology and appearance of electrogalvanized steel sheets

Because the lightness, the gloss and the press-formability of electrogalvanized steel sheets change depending on the morphology of deposited Zn, control of this factor is essential to improving these properties. The effects of plating factors on the morphology of deposited Zn were systematically discussed both from the crystallographic viewpoint of epitaxy between Zn and steel and from the electrochemical viewpoint of the overpotential for Zn deposition. Plating factors include crystal orientation of steel substrate, current density, flow rate, temperature, addition of inorganic compounds to the solution and pre-adsorption of organic compounds. These plating factors affect the overpotential for Zn deposition and epitaxy between Zn and steel. The crystal orientation index of the Zn basal plane and the platelet crystal size of Zn are decreased with increasing the overpotential for Zn deposition. They are also decreased with decreasing the epitaxy between Zn and steel, even when the overpotential is kept constant. When the overpotential for Zn deposition is increased, the surface roughness of deposited Zn increases because of an increase in the inclination of the Zn basal plane to the steel substrate. When the epitaxy between Zn and steel is decreased without changing the overpotential, the surface roughness is reduced due to the decrease in platelet crystal size of Zn, although the inclination of the Zn basal plane is somewhat increased. The lightness of deposited Zn is enhanced with decreasing the surface roughness of Zn.     

Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.