Lower Irritation Potential of Laureth‐3 Carboxylate Amino Acid Salt

Sodium laureth sulfate and amino acid type surfactants have been categorized as low‐skin irritation chemicals based on results of previous skin irritation tests. However, detergent‐induced skin irritation still occurs. Detergents with a low‐skin irritation effect are required, since the number of cosmetics for sensitive skin has increased. Therefore, an in vitro method of testing the safety of cosmetics for sensitive skin is required. Skin irritation by anionic surfactants was investigated to determine the effect of laureth‐3 carboxylate (polyoxyethylene lauryl carboxymethyl ether) amino acid salt on skin irritation. In addition, sodium laureth sulfate and amino acid type surfactants, regarded as low‐irritation surfactants, were also tested for skin irritation. The skin irritation effect of laureth‐3 carboxylate lysine salt (Surfactant 1 ), sodium laureth sulfate (Surfactant 2 ), and sodium N‐lauroyl glutamate (Surfactant 3 ) were investigated using a reconstructed human cultured epidermal model, LabCyte EPI‐MODEL24 6D. Cell viabilities of cultured epidermal cells exposed to Surfactant 1 (5.0 % aq.), Surfactant 2 , and Surfactant 3 were 82.0, 45.0 and 19.1 %, respectively. There were significant differences in cell viability upon exposure to 5.0 % aqueous test solutions of the three test chemicals. The results of the current investigation indicate that Surfactant 1 has a low skin‐irritation effect.     

Development of a transparent single-grid-type micro-strip gas chamber based on LCD technology

The liquid crystal display (LCD) technology allows several simple circuits to be built using thin film transistors, thus making fabrication of compact, integrated, large-area, and low-cost micro-pattern gaseous detectors possible. In this work, a single-grid-type micro-strip gas chamber (S-MSGC) using transparent electrodes based on the LCD technology was fabricated and successfully operated in several gas mixtures. The detector was coupled with a multi-pixel photon counter to detect an optical signal through the transparent substrate in Ar/CF₄ gas. Both electrical and optical signals were measured and the light yield of the detector was acquired. Successful operation of the S-MSGC can be considered the very important first step for development of the next target of integrated devices.     

Self-Assembling Lectin Nano-Block Oligomers Enhance Binding Avidity to Glycans

Lectins, carbohydrate-binding proteins, are attractive biomolecules for medical and biotechnological applications. Many lectins have multiple carbohydrate recognition domains (CRDs) and strongly bind to specific glycans through multivalent binding effect. In our previous study, protein nano-building blocks (PN-blocks) were developed to construct self-assembling supramolecular nanostructures by linking two oligomeric proteins. A PN-block, WA20-foldon, constructed by fusing a dimeric four-helix bundle de novo protein WA20 to a trimeric foldon domain of T4 phage fibritin, self-assembled into several types of polyhedral nanoarchitectures in multiples of 6-mer. Another PN-block, the extender PN-block (ePN-block), constructed by tandemly joining two copies of WA20, self-assembled into cyclized and extended chain-type nanostructures. This study developed novel functional protein nano-building blocks (lectin nano-blocks) by fusing WA20 to a dimeric lectin, Agrocybe cylindracea galectin (ACG). The lectin nano-blocks self-assembled into various oligomers in multiples of 2-mer (dimer, tetramer, hexamer, octamer, etc.). The mass fractions of each oligomer were changed by the length of the linkers between WA20 and ACG. The binding avidity of the lectin nano-block oligomers to glycans was significantly increased through multivalent effects compared with that of the original ACG dimer. Lectin nano-blocks with high avidity will be useful for various applications, such as specific cell labeling.     

Reactive processing of thermoset/thermoplastic blends: A potential for injection molding

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) is an engineering plastic with high heat distortion temperature. Melt processing of neat PPE is usually accompanied with thermal degradation. The degradation problem is solved by blending with polystyrene to reduce the processing temperature. We propose an alternative using triallylisocyanurate (TAIC). TAIC is a low viscosity liquid that can be cured by peroxide, e.g. α,α′-bis(t-butylperoxy-m-isopropyl)benzene (PBP), to provide a thermoset. The PPE/TAIC mixture was shown to have the upper critical solution temperature (UCST) type phase behavior. At the single-phase regime above UCST and below the cure temperature (∼180°C for PBP), the mixture had a low viscosity, less viscous than a conventional thermoplastic such as PC and PP. That is, a nice window for injection molding was available, e.g., at 100°C to 160°C for a 50/50 blend. After injecting into a hot mold set at cure temperature, the blend cured in a short time (∼80% conversion in 5 min). Then the molded and partly cured material kept its shape and dimensions during post-cure in a hot chamber at higher temperature (e.g. 250°C). Using transmission electron microscopy and dynamic mechanical analyses, it was shown that the cured blend had a bicontinuous two-phase structure with periodic spacings of ∼30 nm, suggesting a structure formation via a spinodal decomposition driven by the increase in molecular weight of TAIC during cure. The cured material showed excellent flexural strength and high chemical resistance.     

Oncogenic Mutation BRAF V600E Changes Phenotypic Behavior of THLE-2 Liver Cells through Alteration of Gene Expression

The accumulation of mutations in cancer driver genes, such as tumor suppressors or proto-oncogenes, affects cellular homeostasis. Disturbances in the mechanism controlling proliferation cause significant augmentation of cell growth and division due to the loss of sensitivity to the regulatory signals. Nowadays, an increasing number of cases of liver cancer are observed worldwide. Data provided by the International Cancer Genome Consortium (ICGC) have indicated many alterations within gene sequences, whose roles in tumor development are not well understood. A comprehensive analysis of liver cancer (virus-associated hepatocellular carcinoma) samples has identified new and rare mutations in B-Raf proto-oncogene (BRAF) in Japanese HCC patients, as well as BRAF V600E mutations in French HCC patients. However, their function in liver cancer has never been investigated. Here, using functional analysis and next generation sequencing, we demonstrate the tumorigenic effect of BRAF V600E on hepatocytes (THLE-2 cell line). Moreover, we identified genes such as BMP6, CXCL11, IL1B, TBX21, RSAD2, MMP10, and SERPIND1, which are possibly regulated by the BRAF V600E-mediated, mitogen-activated protein kinases/extracellular signal-regulated kinases (MAPK/ERK) signaling pathway. Through several functional assays, we demonstrate that BRAF L537M, D594A, and E648G mutations alone are not pathogenic in liver cancer. The investigation of genome mutations and the determination of their impact on cellular processes and functions is crucial to unraveling the molecular mechanisms of liver cancer development.     

Formation Mechanism and Synthesis of Apatite-Type Structure Ba2+xLa8−x(SiO4)6O2−δ

The formation process of Ba₂La₈(SiO₄)₆O₂ was clarified using thermogravimetry–differential thermal analysis (TG-DTA) and a high-temperature powder X-ray diffraction (HT-XRD) method. Phase changes identified from the HT-XRD data surprisingly corresponded to the weight loss and/or endothermic peaks observed in the TG-DTA curves. Raw material with the composition Ba₂La₈(SiO₄)₆O₂ was completely reacted at 1400°C and produced only an apatite-type compound without a secondary phase. Moreover, the synthesis of Ba_{2+ x} La_{8− x} (SiO₄)₆O_2−δ crystals with x = 0–2 was attempted using a solid-state reaction.     

Thermophysical properties of (U,Y)O2

We prepared polycrystalline pellets of (U,Y)O₂, containing YO_1.5 up to 11 mol.%. We performed indentation tests on the pellets, and evaluated the Young’s modulus and hardness. We measured the heat capacity and the thermal diffusivity, and evaluated the thermal conductivity. We succeeded in evaluating the effect of Y content on the thermophysical properties of (U,Y)O₂. We revealed that the Young’s modulus, hardness, and thermal conductivity of (U,Y)O₂ decreased with increasing the Y content.     

Investigation of radiation-induced surface activation effect in austenitic stainless steel under ultraviolet and γ-ray irradiations

The radiation-induced surface activation (RISA) effect will be applied to the core design in supercritical light water reactor (SCWR) in order to achieve a high performance with excellent economy and safety. The purpose of the present study is to investigate the RISA effect in the candidate fuel cladding materials in SCWR such as PNC1520. The change of weldability due to RISA effect and the related microstructure analysis were performed in oxidized PNC1520 and 304 stainless steel with various oxidization periods. The phases contained in the surface oxide layer of the present specimen were identified as Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃. The lifetime of 13.8 days for wettability improving factor was confirmed in the ultraviolet (UV) irradiation. Meanwhile, the long life of 13.8 days and short life of 0.8 days for wettability improving factors were identified in the γ-ray irradiation. Based on the fact that the band gap energies of Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃ were, respectively, 2.1, 2.0, and 2.2 eV, and the photo energies of UV and γ-ray irradiation were 4.48 eV and 13.3 MeV, it is therefore clarified that the hydrophilization on the oxide layer is ascribed to the RISA effect.     

Processability and mechanical properties for binary blends of PP and LLDPE produced by metallocene catalyst

Processability at extrusion coating and mechanical properties of the films obtained are investigated by means of linear and nonlinear rheological measurements and tensile tests for blends of polypropylene (PP) and linear low‐density polyethylene (LLDPE). Both materials are produced by metallocene catalyst. The processability of PP is found to be improved by the addition of LLDPE; the blend shows low level of motor torque and head pressure in an extruder and small level of neck‐in as compared with pure PP. Further, the anisotropy of ultimate tensile strength, which is prominent for PP, is reduced by blending with LLDPE. As a result, the blend having 20 wt % of LLDPE shows appropriate properties in the molten state for extrusion coating and in the solid state as a film. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009