Superconducting Magnetic Filter: Performance, Recovery, and Design

Due to the development of superconducting magnets, the magnetic filtration process is now undergoing its biggest evolution since its conception. In Japan, the first industrial superconducting magnetic filter has been successfully applied for factory wastewater treatment. Much effort in both theory and practice is needed to further contribute to the new developments of this high gradient magnetic filtration process. In this substantial review, we have collected the most important theoretical and practical data about magnetic filtration, its recovery and design to establish a good framework for further development of this amazing technology.     

Inhibition of rat platelet aggregation by mycalolide-B, a novel inhibitor of actin polymerization with a different mechanism of action from cytochalasin-D

In vitro effects of mycalolide-B (MB), isolated from marine sponge, were investigated with regard to the activation of rat platelets. Collagen-induced platelet aggregation in platelet-rich plasma (PRP) was slightly but significantly potentiated by lower concentrations of MB (0.3 and 1 microM) but was inhibited by higher concentrations (3 and 10 microM). ADP-induced platelet aggregation in PRP was also significantly prevented by MB (1-10 microM). Potentiation of ADP-induced aggregation by MB (0.3 microM) was hardly observed. G-actin contents, determined by DNase I inhibition assay, were increased in resting washed platelets incubated with MB (3 microM). In contrast, cytochalasin-D (CD) at 3 microM slightly reduced G-actin contents in resting platelets. After platelet aggregation with collagen (3 microg/ml) or ADP (10 microM), G-actin contents in platelets were reduced, indicating de novo actin polymerization. MB (3 microM) and CD (3 microM) abolished both ADP (10 microM)- and collagen (3 microg/ml)-induced platelet aggregation and actin polymerization in washed platelets. MB (1-10 microM) had no effects on intracellular Ca2+ concentrations in ADP (10 microM)-stimulated platelets. [125I]-fibrinogen binding to activated platelets with ADP (10 microM)(was inhibited by MB (0.3-3 microM) in a concentration-dependent manner. Thrombin-induced platelet-fibrin clot retraction was inhibited by MB (1 and 10 microM). These results suggest that MB inhibits platelet activation by interfering with actin polymerization through a different mechanism of action from CD. MB may be a useful tool for studying the role of actin polymerization in various cells.     

Transcriptional activation of the tobacco retrotransposon Tto1 by wounding and methyl jasmonate

Health visitors and Clinical Medical Officers (CMOs) were trained in parent counselling and worked at home in a highly deprived area with parents of pre-school children with multiple psychosocial problems. Their basic aims were to establish a mutually respectful partnership and to support parents in managing their diverse problems. Detailed evaluation indicated that the Service was highly valued by both parents and referrers, and suggested significant changes, including: improvements in the severity of problems; increased parental self-esteem; decreased levels of parental stress and emotional difficulties; more positive constructions of their children; improvements in the home environment; and decreased child behavioural problems.     

Growth characteristics of CdZnTe layers grown by metalorganic vapor phase epitaxy using dimethylzinc, dimethylcadmium, diethyltelluride, and dimethyltelluride as precursors

Growth characteristics of (100)-oriented CdZnTe layers grown by atmospheric-pressure metalorganic vapor phase epitaxy have been studied using dimethylzinc (DMZn), dimethylcadmium (DMCd), diethyltelluride (DETe), and dimethyltelluride (DMTe) as precursors. Variations of Zn composition and layer growth rate were examined by changing the DMZn supply ratio, defined as DMZn/(DMCd+DMZn), where the precursors are expressed in appropriate units of flow rate, from 0 (no DMZn) to 1.0 (no DMCd), while keeping the total group II supply rate constant. The growth rate of CdZnTe layers was found to decrease monotonically with increase of the DMZn supply ratio. On the other hand, the Zn composition x of grown layers increased gradually up to x=0.04 with increase of the DMZn supply ratio from 0 to 0.8, beyond which the Zn composition increased abruptly to ZnTe. The abrupt transition of Zn composition was suppressed by increasing the VI/II ratio. The growth mechanism of CdZnTe layers was studied based on the observed growth characteristics of CdTe and ZnTe. A higher desorption rate from the growth surface for Zn species than for Cd species, and a higher rate of CdTe formation than ZnTe formation are believed to cause the observed growth characteristics. CdZnTe layers with high crystal quality were grown in a wide range of Zn compositions. The full-width at half-maximum values for x-ray double-crystal rocking-curve measurements were lower than 320 arc-sec for x<0.3 and x>0.75.     

Modification of oxidized graphite edge surface with poly(vinyl chloride)

An oxidized edge surface of pyrolytic graphite (PG) has been prepared by electrochemical treatment. A thin layer of poly(vinyl chloride) (PVC) was coated on the oxidized edge surface, and the PVC-coated sample heat treated at 300, 400, and 500 °C, respectively. The influence of the PVC coating on the structural change of the oxidized edge surface of PG caused by the heat treatment was studied by laser Raman and Fourier transform-infrared attenuated total reflection spectroscopies. For the electrochemical treatment, the formation of oxygen-containing functional groups proceeds over the edge surface of PG. With increasing degree of oxidation, the functional groups are formed in the following order; hydroxyl groups, carboxyl groups, lactone groups, quinones, and acid anhydrides. Acid anhydrides are formed on the outermost surface and completely eliminated by heat treatment up to 300 °C. The other functional groups remain even after heat treatment up to 500 °C. However, the functional groups are eliminated by the PVC coating, the elimination temperature depending on the type of functional groups: quinones, lactone groups, and carboxyl groups are eliminated at 300, 400, and 500 °C, respectively. PVC coated on the edge surface is found to play an important role in the complete elimination of oxygen-containing functional groups with >C=O through heat treatment at 500 °C.     

Outcome of en bloc and single kidney transplantation from very young cadaveric donors

BACKGROUND: The optimal use of very young cadaveric kidneys (from donors less than 4 years old) remains controversial. High rates of technical complications and poor functional results compared with adult donor kidneys have been reported. The use of en bloc transplantation to overcome these problems has been advocated, although en bloc transplantation halves the number of potential transplants from very young donors. METHODS: We studied the technical and functional results of 91 transplants from very young donors performed at our institution between 1984 and 1995. This included 59 single and 22 en bloc procedures involving first transplants and 7 single and 3 en bloc procedures involving retransplantation. Individual surgeon preference dictated the use of either the single or en bloc technique. Kidneys smaller than 6 cm tended to be transplanted en bloc, and lighter patients were generally given preference for receiving pediatric kidneys. Patients received sequential cyclosporine-based quadruple immunosuppression. RESULTS: En bloc kidneys had a 1-year and 5-year graft survival of 82% and 70%, respectively. Single kidneys had a 1-year and 5-year graft survival of 64% and 40%. Kidneys that avoided acute rejection episodes and that were transplanted into heavier or male recipients had better long-term survival. Kidneys from donors less than 2 years old did poorly whether transplanted en bloc or singly. Better HLA matching improved short-term, but not long-term, graft survival, whereas cold ischemic time did not have statistically significant association with differences in graft survival. Eleven percent of the transplants had ureteral leaks, but only one kidney was lost. Ten transplants had vascular complications leading to graft loss, whereas two episodes of arterial stenosis were successfully treated with percutaneous angioplasty. CONCLUSIONS: En bloc transplantation optimizes the outcome of transplantation with very young kidneys. We recommend induction therapy and cyclosporine immunosuppression with cyclosporine levels similar to adult target levels to minimize rejection episodes and, thus, improve outcome. These kidneys should be distributed nationally, because better HLA matching is associated with improved short-term graft survival. Our high ureteral leak rate indicates that alternatives to unstented ureteroneocystostomy should be considered.     

Leaching kinetics of copper from natural chalcocite in alkaline Na4EDTA solutions

The leaching behavior of copper from natural chalcocite (Cu₂S) particles in alkaline Na₄EDTA solutions containing oxygen was examined at atmospheric pressure. The EDTA leaching process took place with consecutive reactions, where the solid product of the first reaction, covellite (CuS), became the reactant for the second. The copper leached into the alkaline solutions was immediately consumed by the chelation of copper (II) with EDTA, and the mineral sulfur was completely oxidized to sulfate ion. The experimental data for the leaching rate of copper were analyzed with a familiar shrinking-particle model for reaction control. The conversion rate of chalcocite to covellite was found to be about 10 times as high as the dissolution rate of covellite. The time required for complete dissolution of covellite was directly proportional to the initial particle size and was inversely proportional to the square root of the product of the hydroxide ion concentration and the oxygen partial pressure, but it was independent of the Na4EDTA concentration in the presence of excess Na₄EDTA. The observed effects of the relevant operating variables on the dissolution rate were consistent with a kinetic model for electrochemical reaction control. The kinetic model was developed by applying the Butler-Volmer equation to the electrochemical process, in which the anodic reaction involves the oxidation of covellite to copper (II) ion and sulfate ion and the cathodic reaction involves the reduction of oxygen in alkaline solution. The rate equation allowed us to predict the time required for the complete leaching of copper from chalcocite in the alkaline Na4EDTA solutions.     

Increased expression of 3-hydroxyanthranilate 3,4-dioxygenase gene in brain of epilepsy-prone El mice

The El mouse is an established animal model for human epilepsy. We previously reported that the level of quinolinic acid (QUIN), an excitotoxin, was high in the brain of epilepsy-prone El mice and that the increased production of QUIN was secondary to an increased activity of 3-hydroxyanthranilate 3,4-dioxygenase (3-HAO, EC 1.13.11. 6) in the brains of these mice. In this study, we cloned and sequenced the cDNA for 3-HAO and showed that its expression in the brain of El mice was higher than that of control ddY mice. These results suggest that a genetic defect leading to derepression of the 3-HAO gene expression in the brain may be involved in the pathogenesis for the epileptic diseases of El mice.