Thickness dependence of H2 gas sensor in amorphous SnQx films prepared by ion-beam sputtering

Amorphous SnO_x films were deposited by ion-beam sputtering on sintered alumina substrates. Amorphous film sensors were prepared by annealing the films at 300° C for 2 h in air. The thickness dependence of resistivity and hydrogen gas sensitivity were measured at 150° C over the thickness range 1 to 700 nm. A resistivity maximum was observed in ultrathin films. Resistivity increased by three orders of magnitude with increasing film thickness from 0.9 to 7.4 nm and then decreased by five orders of magnitude from 7.4 to 35 nm. Ultrathin film sensors showed sensitivity maxima around a thickness of 10 nm. Sensitivity and resistivity of ultrathin films were significantly influenced by the thermal expansion coefficient and the surface state of the substrate.     

Modification of mesophase pitch by blending Part 2 Modification of mesophase pitch fibre precursor with thermoresisting polyphenyleneoxide (PPO)

Polyphenyleneoxide was blended in amounts of 5 or 10 wt% into petroleum-derived mesophase pitch to reinforce the pitch fibre before the oxidative stabilization to achieve better handling properties. Although polyphenyleneoxide was fusible but hardly soluble in the mesophase pitch even at a spinning temperature of 350° C, blended pitch could be smoothly spun into pitch fibre 10m diameter, as could the parent pitch. Fibrous polyphenyleneoxide of less than 1m diameter was homogeneously dispersed in the pitch fibre, being arranged along the fibre axis. Such fibrous polyp henyleneoxide reinforced the pitch fibre considerably. The fibrous substances at the centre of the fibre disappeared in the carbonized fibre at 1300° C after oxidation at 250° C, although some short ones were observed in the skin region of the fibre, suggesting that polyphenyleneoxide was co-carbonized to be assimilated with mesophase pitch at the centre of the fibre, where the effects of oxidation may be rather limited. The oxidation reactivity and its mechanical strength after carbonization were slightly lower in comparison with those of the parent mesophase pitch.     

Collective modes and a theory of response ofd-wave superconductors

We present a theory of the response ofd-wave superconductors to weak applied fields, by taking account of the Coulomb interaction and all the collective degrees of freedom as well as crystal symmetry. We choose two representative phases: the d phase, which has point nodes in the energy gap, and theY _2–1 phase, which has line as well as point nodes. The former is a self-consistent solution for cubic as well as spherical symmetries and the latter is one for spherical, cubic, and hexagonal symmetries. We obtain obviously gauge-invariant expressions for the order-parameter fluctuations and the currents, having forms common not only to thed-wave states, but also to thep-wave states studied earlier. We also investigate the collective excitations; in the long-wavelength limit for spherically symmetric systems, there are, on the frequency-temperature plane, seven branches for eachd-wave phase considered, in addition to the common plasma mode and orbital Goldstone modes resulting from the spontaneous breakdown of the rotational invariance. In theY _2–1-phase two eigenmodes are found to become gapless at a finite temperature, below which they are purely imaginary. This implies instability of the phase. The effect of crystal anisotropy on the collective spectra is also studied.A preliminary report on the present work was published inJpn. J. Appl. Phys. Suppl. 26-3, 167 (1987).     

Activities of FexO in CaO + CaF2 + SiO2 + FexO quaternary slags by disposable electrochemical oxygen probes

The activities of Fe_xO in CaO + CaF₂ + SiO₂ + Fe_xO quaternary slags were measured by means of solid-oxide galvanic cell. The Fe_xO activities in the slags are influenced by CaF₂ as well as SiO₂. At constant Fe_xO mole fractions, e.g., , at low SiO₂ mole fractions i.e., , the substitution of CaF₂ for CaO has an effect of raising the Fe_xO activity. At higher SiO₂ mole fractions, e.g., , however, such an effect becomes insignificant.     

Physicochemical properties of rare earth perovskite oxides used as gas sensor material

The change of the conductivity in the rare earth perovskite oxide took place after the chemisorption of flammable gases. The sensitivity for methanol was highest. From the conductivity change of these perovskite oxides after the injection of methanol, the energy needed to promote an electron from a conducting to a nonconducting state, E=E _c-E _t, could be derived from the equation=A ₀ exp (–E/kT). LnCoO₃ had the smallest E and H (metal-O), which is the binding energy of oxygen coordinating to the metal ions, but exhibited the highest activity for gas sensing. The gas sensing mechanism was also considered.     

MiR-10a in Pancreatic Juice as a Biomarker for Invasive Intraductal Papillary Mucinous Neoplasm by miRNA Sequencing

New biomarkers are needed to further stratify the risk of malignancy in intraductal papillary mucinous neoplasm (IPMN). Although microRNAs (miRNAs) are expected to be stable biomarkers, they can vary owing to a lack of definite internal controls. To identify universal biomarkers for invasive IPMN, we performed miRNA sequencing using tumor-normal paired samples. A total of 19 resected tissues and 13 pancreatic juice samples from 32 IPMN patients were analyzed for miRNA expression by next-generation sequencing with a two-step normalization of miRNA sequence data. The miRNAs involved in IPMN associated with invasive carcinoma were identified from this tissue analysis and further verified with the pancreatic juice samples. From the tumor-normal paired tissue analysis of the expression levels of 2792 miRNAs, 20 upregulated and 17 downregulated miRNAs were identified. In IPMN associated with invasive carcinoma (INV), miR-10a-5p and miR-221-3p were upregulated and miR-148a-3p was downregulated when compared with noninvasive IPMN. When these findings were further validated with pancreatic juice samples, miR-10a-5p was found to be elevated in INV (p = 0.002). Therefore, three differentially expressed miRNAs were identified in tissues with INV, and the expression of miR-10a-5p was also elevated in pancreatic juice samples with INV. MiR-10a-5p is a promising additional biomarker for invasive IPMN.     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.     

Carbonization of coals to produce anisotropic cokes. 1. Modifying activities of some additives in the co-carbonization of low-rank coals

Using low-rank coals, the modifying activities of some petroleum, coal tar and aromatic hydrocarbon additives have been examined to find procedures for their utilization in the preparation of blast furnace coke. Petroleum pitch, especially after hydrogenation, exhibited excellent modifying activity even with non-fusible coals. In contrast, the activity of coal tar was very limited with such coals. The napththenic component, revealed by n.m.r. of the additives, appears to be important in the co-carbonization by inducing fusibility and anisotropic development in such coals. Co-carbonization to recover the dehydrogenated additives was attempted. However, there was no development of the anisotropy in the resultant coke by dissolution of the coal particles although the coal particles were firmly fixed in the matrix. Acid-refluxing treatment of non-fusible coals was found to enhance their modification susceptibility, indicating that some of the acid-soluble mineral matter is important in the thermal depolymerization or fusion process of the coal.     

Multi-dimensional transient mathematical simulator of blast furnace process based on multi-fluid and kinetic theories

The ironmaking blast furnace is regarded as one of the biggest and most complex industrial reactors, because it includes various materials like gas, lump granular materials, liquids and powders and more than 30 major reactions and phase changes in a single reaction vessel. The mathematical simulator of this process developed in this study used the multi-fluid treatment as its framework, since the motions of these materials were governed by different flow mechanisms. The rates of the interactions among the phases and the chemical reactions were evaluated based on kinetic theories. The model successfully reproduced the fields of velocity, temperature and reaction in the furnace and its validity was confirmed. The simulator was also applied to a novel operation, namely the top gas recycling combined with the carbon-composite iron-ore charging and the waste plastics injection, and the advantages in furnace efficiency and environmental load were quantitatively indicated.     

Synthesis of Thermally Stable χ-Alumina by Thermal Decomposition of Aluminum Isopropoxide in Toluene

Thermal decomposition of aluminum isopropoxide in toluene at 315°C resulted in χ-alumina that had high thermal stability, whereas the reaction at lower temperatures resulted in formation of an amorphous product. The χ-alumina thus obtained directly transformed to α-alumina at ∼1150°C, bypassing the other transition alumina phases, whereas the amorphous product transformed to γ-alumina and then to θ-alumina before final transformation to α-alumina. When the χ-alumina, solvothermally synthesized at 315°C, was recovered by the removal of the solvent at the reaction temperature, thermal stability of the product was improved further. This procedure is convenient because it avoids bothersome work-up processes that yield large-surface-area and large-pore-volume alumina.