Alignment of a nematic liquid crystal on nano‐grooved material

We demonstrate the alignment characteristics of a nematic liquid crystal on the surface of a nanoimprinted material that is a functionally graduated composite suitable for the alignment of a liquid crystal on a groove surface processed by nanoimprinting lithography. With the electro‐optic characteristics shown in twisted nematic and in‐plane switching modes, the potential liquid crystal applications are examined. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

In situ binary sol–gel reaction of various trifunctional alkoxysilane in the silane‐grafted polyolefin matrix and its effect upon the mechanical properties

The vinyltrimethoxysilane‐grafted ethylene‐propylene copolymer/trifunctional methoxysilane (EPR‐g‐VTMS/RTMS) composites were prepared via in situ silica sol–gel reactions. Five trifunctional methoxysilane compounds (n‐hexyltrimethoxysilane, n‐decyltrimethoxysilane, n‐tetradecyltrimethoxysilane, n‐octadecyltrimethoxysilane, and phenyltrimethoxysilane) have been selected for this study. The water‐cross‐linked EPR‐g‐VTMS/RTMS composites were characterized by attenuated total reflectance‐Fourier transform infrared spectroscopy, gel content, solid‐state ²⁹Si CP/MAS NMR, wide‐angle x‐ray scattering, tensile strength, and field emission scanning electron microscopy measurements. The type of RTMS additive has a substantial influence on the nature of siloxane band networks and eventually the mechanical tensile properties. This finding suggests that the interaction and/or entanglement between the EPR‐g‐VTMS matrix and the substituent of the RTMS additives are crucial for the modifying mechanical properties. Moreover, for the water‐cross‐linked EPR‐g‐VTMS/CnTMS (n = 6, 10, 14, and 18) composites, the joint evidence provided by attenuated total reflectance‐Fourier transform infrared spectroscopy, ²⁹Si CP/MAS NMR, and wide‐angle x‐ray scattering results suggested the formation of ladder‐type poly(n‐alkyl silsesquioxane)s and the presence of the highly ordered structure with a thickness equal to the length of two n‐alkyl groups in all‐trans conformation. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Fabrication of nanostructured polycarbonate/poly(methyl methacrylate) blends with improved optical and mechanical properties by high‐shear processing

The structure and properties of polycarbonate (PC)/poly(methyl methacrylate) (PMMA) blends fabricated using a high‐shear extruder at different shear rates were investigated. It was found that the morphologies of the blends were greatly dependent on the shear rate exerted during melt processing. High‐shear processing leads to a nanostructured PC/PMMA blend, in which PMMA domains with a size of less than 50 nm are homogeneously dispersed in the PC matrix. The prepared nanostructured blends exhibit not only excellent optical properties with a transmittance of more than 90% in the visible region but also a higher modulus than pure PC. In contrast, the PMMA domain size ranges from submicron to micrometer for the same blends processed at a low‐shear rate. These blends are opaque and display much lower elongation at break compared with the blends processed at a high‐shear rate. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

Rapid Desensitization of Lipolysis in the Visceral and Subcutaneous Adipocytes of Rats

In adipocytes, short and long term stimulation of β adrenergic receptors (βAR) induces the desensitization to catecholamines, leading to a decrease in the intracellular accumulation of cAMP, but the roles played by this in lipolysis is not clear. In this study, we assessed the catecholamine-induced desensitization of lipolysis and compared this in adipocytes isolated from visceral and subcutaneous fat tissues of rats. When adipocytes were pretreated with isoproterenol (ISO), the norepinephrine (NE)-induced lipolysis was significantly reduced dose- and time-dependently. A similar reduction of the lipolytic response was also found in NE-, dobutamine-, terbutaline- or BRL37344-induced lipolysis. The ISO- and each βAR agonist-induced lipolysis in the visceral fat was not only higher than in the subcutaneous fat, but also markedly reduced by ISO- or NE-pretreatment. These results showed that short-term treatment of three subtypes of βAR by each agonist induces a rapid reduction in the lipolytic response to βAR stimulation. This suggests some common mechanism for the rapid desensitization of βAR-agonist-induced lipolysis, in contrast with previous reports on the characteristics of βAR subtypes. In addition, the regional difference of adipose tissue not only in inducing lipolysis but also in rapid desensitization was also apparent.     

Fuel and emissions properties of Stirling engine operated with wood powder

From viewpoints of the environment and fuel cost reduction, small-scale biomass combined heat and power (CHP) plants are in demand, especially wood-waste fueled system, which are simple to operate and maintenance-free with high thermal efficiency similar to oil fired units. These are requested by wood and other industries located in mountainous region. To meet these requirements, a Stirling engine CHP system combined with simplified biomass combustion process with pulverized wood powder was developed.In an R&D project started in 2004 considering wood powder properties as a fuel, combustion performance and emissions in combustion flue gas were tested using combustion test apparatus with commercial size units. The wood powder combustion system was modified and optimized during the combustion test results, and the design of the demonstration plant combined with 55 kW_e Stirling engine power unit was considered. The demonstration plant was finally completed in March of 2006, and test operation has been progressed for the future commercial CHP system.In the wood powder combustion test, wood powder of less than 500 μm is mainly used, and a combustion chamber length of 3 m is applied. In these conditions, the air ratio can be reduced to 1.1 without increasing CO emission of less than 10 ppm and combustion efficiency of 99.9%. In the same conditions, NO_x emission is estimated to be less than 120 ppm (6% O₂ basis). Wood powder was confirmed to have excellent properties as a fuel for Stirling engine CHP system. This paper summarizes the wood powder combustion test, and presents the evaluation of the burner design parameters for the biomass Stirling engine system.     

Membranes prepared from keratin–polyacrylonitrile graft copolymers

Graft copolymerization of acrylonitrile onto a soluble wool keratin derivative was studied with the reduced and carboxymethylated low-sulfur protein fraction from wool. Copolymerization was carried out under a variety of conditions with a redox system of (NH₄)₂S₂O₈–Na₂SO₃ in 60% (w/w) aqueous ZnCl₂ solution at 10°C. Monomer conversions higher than 90% were obtained by the stepwise addition of initiator. The graft products were successfully separated into grafted copolymer and homopolyacrylonitrile (PAN) by fractional precipitation or solvent extraction with DMF. Grafted PAN were isolated by acid hydrolysis of the keratin backbone. Characterization of grafted and homo-PAN was carried out by IR spectroscopy, amino acid endgroup analysis, and viscometry. On the basis of the results, effects of polymerization conditions on grafting parameters were discussed. Membranes were prepared from 60% aqueous ZnCl₂ solution by using ice-cold water as the regenerating medium. All the membranes formed from the graft products were transparent. Observation by scanning electron microscopy showed that the surface consisted of rather spherical keratin domains regularly distributed in the PAN matrix. Selective hydrolysis of the keratin domains allowed a new type of porous PAN membrane to be obtained, with the inner walls of the pores being charged with amino acid residues attached to PAN chains as the endgroup.     

Multilayer‐coated NPK compound fertilizer hydrogel with controlled nutrient release and water absorbency

A novel trilayered controlled‐release nitrogen, phosphorous, and potassium (NPK) fertilizer hydrogel was prepared by dipping the NPK fertilizer granules sequentially in 7% w v^?1 poly(vinyl alcohol) (PVA) and 2% w v^?1 chitosan (CS) solutions and then cross‐linking the CS layer (cross‐CS) via glutaraldehyde vapor deposition. Different NPK fertilizer hydrogels were then synthesized by inverse suspension polymerization of the dried PVA/cross‐CS bilayer‐coated fertilizer granules in various molar ratios of acrylamide (AM) and acrylic acid (AA) monomers, and polymerization with varying molar ratios of ammonium persulfate, N,N,N′,N′‐tetramethylethylenediamine and N,N′‐methylenebisacrylamide (N‐MBA). The water dissolution time of the obtained PVA/cross‐CS/poly (AA‐co‐AM) trilayer‐coated NPK fertilizer hydrogel granules was prolonged, while the water absorbency increased with increasing AA contents, and decreased with increasing N‐MBA contents in the outer poly(AA‐co‐AM) coating. The optimal trilayer‐coated NPK fertilizer hydrogel obtained released 84 ± 18, 63 ± 12, and 36 ± 15% of the N, P, and K nutrients, respectively, after a 30‐day immersion in water. The release phenomena of the N, P, and K nutrients of the fertilizer hydrogel obeyed both the Korsmeyer‐Peppas and Ritger‐Peppas models with a pseudo‐Fickian diffusion mechanism. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41249.     

Extraction of Trivalent Rare Earths and Minor Actinides from Nitric Acid with N,N,N’,N’-Tetradodecyldiglycolamide (TDdDGA) by Using Mixer-Settler Extractors in a Hot Cell

Single-stage batch experiments to reveal the extraction properties of N,N,N’,N’-tetradodecyldiglycolamide (TDdDGA) for Y, La, Eu, Nd, and Am in nitric acid were carried out. The distribution ratios of Y, Eu, Nd, and Am exceeded 10 when the nitric acid concentration was 1–2 mol/dm³ (M), and the distribution ratio of La was 5.5 when the nitric acid concentration was 2 M. A continuous counter-current experiment using 0.1 M TDdDGA diluted with n-dodecane was performed using mixer-settler extractors installed in a hot cell. Nitric acid with a concentration of 2.1 M containing minor actinides (MAs: Am and Cm), rare earths (REs: Y, La, Nd, and Eu), and other fission products (Sr, Cs, Zr, Mo, Ru, Rh, and Pd) was fed to the extractor. TDdDGA effectively extracted MAs and REs from the feed, while other fission products were barely extracted. The extracted MAs and REs were back-extracted by bringing them in contact with 0.02 M nitric acid, and they were collected as the MA–RE fraction. The results indicated that more than 98% of Am and Cm in the feed were recovered in the MA–RE fraction. The proportions of Y, La, Nd, and Eu in the MA–RE fraction were 94.0%, 99.9%, 99.9%, and 86.9%, respectively.     

Preparation of a Near-Infrared Ray Absorption Film from N-Phenylthiocarbamoyl Chitosan Derivative

We recently observed that the decanoylation of N-phenylthiocarbamoyl chitosan (2) with a mixture of decanoic anhydride and pyridine at 60 °C for 24 h afforded N,N-(decanoyl)phenythiocarbamoyl-/2-isothiocynato chitosan decanoate (3b) rather than the expected product N,N-(decanoyl)phenylthiocarbamoyl chitosan decanoate (3a). This result suggested that some of the N,N-(decanoyl)phenylthiocarmbamoyl groups had been converted to isothiocyanate groups during the decanoylation process. The subsequent reaction of compound 3b with aniline gave N,N-(decanoyl)phenylthiocarbamoyl/N-phenylthiocarbamoyl chitosan decanoate (4) in high yield. A solution of compound 4 in CHCl₃ was then added to a solution of copper decanoate (5) in the same solvent, and the resulting mixture was cast onto a glass plate to give a cast film. The film was annealed at 200 °C in an oven to give a greenish film, which showed good near-infrared absorption characteristic in the range of 800–2200 nm.