Submicron dry-etching behavior of β-FeSi2 thin films towards fabrication of photonic crystals

We have investigated dry-etching properties of polycrystalline β-FeSi₂ films formed by ion-beam sputter-deposition (IBSD) and the films epitaxially grown on Si by metal organic chemical vapor deposition (MOCVD) in order to realize fabrication of photonic crystals with several hundreds nanometers in dimension. Using reactive ion etching with magnetic neutral loop discharge (NLD) plasma, we succeeded in realizing a comparatively higher etching rate than that obtained by inductively coupled plasma (ICP). Both reactive ion etching and impact ion etching modes may contribute to etching of β-FeSi₂. We have fabricated a two-dimensional photonic crystal of β-FeSi₂ on Si substrates and confirmed its predicted photonic properties in a reflectance spectrum of polarized light.     

Numerical Study on High-Speed Optical RZ Pulse Transmission in Fiber Link With Dispersion-Slope Management

This paper presents a numerical study of the transmission of a 160-Gb/s return-to-zero pulse train in a fiber link, in which both the dispersion and the dispersion-slope are periodically compensated. Two types of slope-compensation are considered: one is lumped compensation at each repeater, and the other is distributed compensation that uses a slope-reversed negative dispersion fiber. It is predicted that distributed slope compensation will provide better performance than lumped slope compensation at each amplifying repeater. This tendency will hold irrespective of the strength of dispersion-management, though the strong dispersion-management will shorten the available transmission distance.     

An analytical study of the effect of a support geometry on frequency shift and support loss of piezoelectric ring-shaped resonators for healthcare and environmental applications

Ring-shaped resonators with one support have been designed in this work. The ring-shaped resonator reacts with a mass perturbation to provide eigenstate or frequency shifts which could transfer to electrical signals by piezoelectric effect. The aforementioned ring-shaped resonator is mainly comprised with a multilayer of Pt/Ti/PZT/Pt/Ti/SiO₂ deposited on the silicon-on-insulator wafer and expected to be a contour mode. In order to estimate the sensitivity of the ring-shaped resonator against the mass perturbation, the theoretical analysis was conducted by ANSYS from two aspects including: (a) the effect of support geometry on frequency shift and support loss (from view point of vibration mode shape); and (b) the mass application methodology. It is found that low-amplitude vibration area is smaller at narrow support, and frequency shift of trapezoid support is higher than that of rectangle support.     

Downscaling MODIS LST in the East African mountains using elevation gradient and land-cover information

Land-surface temperature (LST) is strongly affected by altitude and surface albedo. In mountain regions where steep slopes and heterogeneous land cover are predominant, LST can vary significantly within short distances. Although remote sensing currently provides opportunities for monitoring LST in inaccessible regions, the coarse resolution of some sensors may result in large uncertainties at sub-pixel scales. This study aimed to develop a simple methodology for downscaling 1 km Moderate Resolution Spectroradiometer (MODIS) LST pixels, by accounting for sub-pixel LST variation associated with altitude and land-cover spatial changes. The approach was tested in Mount Kilimanjaro, Tanzania, where changes in altitude and vegetation can take place over short distances. Daytime and night-time MODIS LST estimates were considered separately. A digital elevation model (DEM) and normalized difference vegetation index (NDVI), both at 250 m spatial resolution, were used to assess altitude and land-cover changes, respectively. Simple linear regressions and multivariate regressions were used to quantify the relationship between LST and the independent variables, altitude and NDVI. The results show that, in Kilimanjaro, altitude variation within the area covered by a 1 km MODIS LST pixel can be up to ±300 m. These altitude changes can cause sub-pixel variation of up to ±2.13°C for night-time and ±2.88°C for daytime LST. NDVI variation within 1 km pixels ranged between –0.2 and 0.2. For night-time measurements, altitude explained up to 97% of LST variation, while daytime LST was strongly affected by land cover. Using multivariate regressions, the combination of altitude and NDVI explained up to 94% of daytime LST variation in Kilimanjaro. Finally, the downscaling approach proposed in this study allowed an improved representation of the influence of landscape features on local-scale LST patterns.     

Potential effects in multi-resolution post-classification change detection

Change detection is one of the primary applications of remote-sensing data, and many techniques have been developed during the past three decades. Although frequently criticized and despite many alternatives, due to its simplicity and intuitive manner, post-classification change detection still remains one of the most applied techniques. Many studies in the field of change detection analysis acknowledge, for instance, the impact of misregistration, inconsistencies in classification schemes or differences in methods for image interpretation. However, there are additional, rarely studied influences that can cause large errors in change detection results, including integrating multi-resolution data, the adjacency effect and the minimum mapping units (MMUs) that are applied to the classification before change detection. This study demonstrates these effects for the complex land cover of the Alvarado mangrove area at the Mexican Gulf Coast, employing 10 m Système Pour l'Observation de la Terre 5 (SPOT-5) high geometric resolution (HRG)‐based and 57 m Landsat Multispectral Scanner (MSS) classifications. As a baseline, the proportion of the fine spatial resolution classes within the coarse spatial resolution cells were derived, from which proportional change matrices were computed. The analysis employs difference measures to compare change matrices and proportional maps. The impact of various tested resampling functions was negligible if coarse resolution data were refined. For coarsening fine spatial resolution data, change matrix comparison was comparatively small but yielded differences of approximately 20% in spatially explicit measures. Incorrect positional alignment indicated differences of up to 5% in the change matrix for a misregistration of 100 m and even higher spatially explicit differences (28%). The discrepancies due to the adjacency effect were rather low. MMUs of 25 ha resulted in differences of up to 36% in the change matrix. The magnitude of the discrepancies of all studied effects depends on the class diversity in the map, and some can also be related to the difference in spatial resolution.     

Upgrading of X-ray CT technology for analyses of irradiated FBR MOX fuel

The X-ray CT technology previously developed by JAEA was upgraded. The shape of the X-ray source beam was changed from a circular shape to an elliptical one and the collimator slit width was decreased from 0.3 to 0.1 mm. The X-ray detector was improved by changing a CdWO₄ scintillator to a highly sensitive silicon semiconductor detector. The analysis code of X-ray CT image was revised with respect to the number of points by using two kinds of experimental results and taking into account the effects of crack existence and deviation of the central void position from the radial center of a fuel pellet. As a result, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assemblies. The error of the dimensional measurement was improved from ±0.1 to ±0.03 mm by upgrading the instrument and revising the analysis code of X-ray CT image. The discriminating accuracy of density difference could be increased, and the low density region (undisturbed region) and high density region (equi-axial and columnar regions) in the X-ray CT image on the cross section of irradiated fuel could be discriminated from each other. The reliability of fuel performance analysis improves because a large number of PIE data can be collected, compared with the conventional destructive PIE.     

Applications of excimer lasers to laser-radar observations of the upper atmosphere

Development of efficient ultraviolet (UV) rare-gas halide excimer lasers has added new possibilities for laser radar (lidar) technique for monitoring atmospheric constituents. An experimental result of the observation of the stratospheric ozone layer by a XeCl laser (308 nm) based on the differential-absorption-lidar (DIAL) technique is described. The obtained ozone profile in an altitude range of 15- 25 km are in good agreement with those measured by radiosonde. The measurement error is analyzed for one-wavelength lidar. The accuracy is estimated to be 10-30 percent within an altitude range of 10-30 km and at a range resolution of 1 km or less. The accuracy and the resolution are higher than the Umkehr method. Recent progress of rare-gas halide lasers and their frequency conversion techniques as a transmitter for lidar are reviewed. Many powerful and reliable new sources are available in almost every wavelength over the near UV region. New applications of these UV sources to the lidar system are also briefly discussed, especially from the scientific field on the middle atmosphere.     

Performance of an impulse turbine with fixed guide vanes for wave power conversion

A simple fixed geometry impulse turbine has been studied as a suitable power converter in Oscillating Water Column based wave power plants. Comparison with the Wells turbine, which is the commonly used self-rectifying turbine in such applications, shows it to be superior in performance under irregular flow conditions. Optimum guide vane angle for maximum efficiency has been arrived at based on the five angles tested.