Protective effects of aqueous extract from Cudrania tricuspidata on oxidative stress-induced neurotoxicity

Total phenolics and flavonols of aqueous extract from different parts of Cudrania tricuspidata (fruit, root, leaf, and stem) and neuronal cell protective effects against oxidative stress-induced cytotoxicity were investigated. The neuronal cell protective effects of aqueous extract from different parts of C. Tricuspidata was examined using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) reduction, lactate dehydrogenase (LDH) release, and neutral red uptake assay. The overall relative neuronal cell protective effects of C. tricuspidata root by 3 assays were much higher than those of leaf, stem, and fruit. The aqueous extract of C. Tricuspidata root also showed higher total phenolics than those of different parts. Therefore, our study suggested that the aqueous extract of root has strong protective effect on oxidative stress-induced neurotoxicity which is correlated with its high level of phenolics, particularly kaempferol, quercetin, and myricetin.     

Isolation and characterization of a novel analyte from Bacillus subtilis SC-8 antagonistic to Bacillus cereus

In this study, an effective substance was isolated from Bacillus subtilis SC-8, which was obtained from traditionally fermented soybean paste, cheonggukjang. The substance was purified by HPLC, and its properties were analyzed. It had an adequate antagonistic effect on Bacilluscereus, and its spectrum of activity was narrow. When tested on several gram-negative and gram-positive foodborne pathogenic bacteria such as Salmonella enterica, Salmonella enteritidis, Staphylococcus aureus, and Listeria monocytogenes, no antagonistic effect was observed. Applying the derivative from B. subtilis SC-8 within the same genus did not inhibit the growth of major soybean-fermenting bacteria such as Bacillus subtilis, Bacillus licheniformis, and Bacillus amyloquefaciens. The range of pH stability of the purified antagonistic substance was wide (from 4.0 to >10.0), and the substance was thermally stable up to 60 °C. In the various enzyme treatments, the antagonistic activity of the purified substance was reduced with proteinase K, protease, and lipase; its activity was partially destroyed with esterase. Spores of B. cereus did not grow at all in the presence of 5 μg/mL of the purified antagonistic substance. The isolated antagonistic substance was thought to be an antibiotic-like lipopeptidal compound and was tentatively named BSAP-254 because it absorbed to UV radiation at 254 nm.     

Optical integrator for optical dark-soliton detection and pulse shaping

The design and analysis of an Nth-order optical integrator using the digital filter technique is presented. The optical integrator is synthesized using planar-waveguide technology. It is shown that a first-order optical integrator can be used as an optical dark-soliton detector by converting an optical dark-soliton pulse into an optical bell-shaped pulse for ease of detection. The optical integrators can generate an optical step function, staircase function, and paraboliclike functions from input optical Gaussian pulses. The optical integrators may be potentially used as basic building blocks of all-optical signal processing systems because the time integrals of signals may sometimes be required for further use or analysis. Furthermore, an optical integrator may be used for the shaping of optical pulses or in an optical feedback control system.     

Object-of-interest image segmentation based on human attention and semantic region clustering

We propose a novel object-of-interest (OOI) segmentation algorithm for various images that is based on human attention and semantic region clustering. As object-based image segmentation is beyond current computer vision techniques, the proposed method segments an image into regions, which are then merged as a semantic object. At the same time, an attention window (AW) is created based on the saliency map and saliency points from an image. Within the AW, a support vector machine is used to select the salient regions, which are then clustered into the OOI using the proposed region merging. Unlike other algorithms, the proposed method allows multiple OOIs to be segmented according to the saliency map.     

Diameter-dependent electromechanical properties of GaN nanowires

The diameter-dependent Young's modulus, E, and quality factor, Q, of GaN nanowires were measured using electromechanical resonance analysis in a transmission electron microscope. E is close to the theoretical bulk value ( approximately 300 GPa) for a large diameter nanowire (d=84 nm) but is significantly smaller for smaller diameters. At room temperature, Q is as high as 2,800 for d=84 nm, significantly greater than what is obtained from micromachined Si resonators of comparable surface-to-volume ratio. This implies significant advantages of smooth-surfaced GaN nanowire resonators for nanoelectromechanical system (NEMS) applications. Two closely spaced resonances are observed and attributed to the low-symmetry triangular cross section of the nanowires.     

Simultaneous nitrification and denitrification in a CEM (cation exchange membrane)-bounded two chamber system

A novel process was developed to induce a simultaneous oxidation of ammonia and denitrification in a single system consisting of two chambers separated by a cation exchange membrane. One was an anoxic chamber and the other was an aerobic chamber. The maximum mass flux via the membrane was calculated as 0.83 mg NH₄⁺-N/m² s in a batch test when the initial concentration of NH₄⁺ was 700 mg N/L. And it was observed that NO₃⁻ and NO₂⁻ moved via the membrane in a reverse direction when NH₄⁺ was transported. When the system was operated in a continuous mode by feeding a wastewater containing glucose and NH₄⁺, it was observed that soluble chemical oxygen demand and NH₄⁺ were simultaneously removed showing 99% and 71  86% of efficiency, respectively. Denitrification occurred in the anoxic chamber and nitrification was carried out in the aerobic chamber.     

Fate of effluent organic matter and DBP precursors in an effluent-dominated river: A case study of wastewater impact on downstream water quality

The impact of treated wastewater discharges on downstream water quality was evaluated in an effluent-dominated stream in the Southwest USA. The fate and transport of effluent organic matter (EfOM) and disinfection by-product (DBP) precursors was studied. Nitrification and biodegradation were important mechanisms. Changes in DBP formation potential along the river appeared to correlate with dissolved organic carbon (DOC) and organic nitrogen concentrations and specific ultraviolet absorbance. The mean oxidation state of carbon (MOC) decreased in value along the river. MOC decreases paralleled decreases in the biodegradability of residual DOC (i.e., lower biodegradable DOC/DOC ratio). The EfOM was biodegradable by up to 40 percent, both in the stream and in a laboratory reactor, and many DBP precursors (e.g., haloacetonitriles, certain nitrosamines) decreased in concentration. Alternatively, the DBP yields for trihalomethanes or haloacetic acids either remained the same or increased slightly, suggesting that these precursors were part of the recalcitrant organic matter (OM).     

Path-dependent nonlinear analysis of a concrete reactor containment vessel subjected to internal pressure using a volume control technique

The so-called volume control method has overcome the drawbacks of the load controlled method and the displacement controlled method by adding a pressure node which has an increment of pressure as an additional degree of freedom to a finite element. In this paper, a nonlinear volume control finite element method has been developed for the nonlinear analysis of reinforced concrete containment reactor vessels (RCCV) and prestressed concrete containment reactor vessels (PCCV), which can predict the ultimate internal pressure capacity of a containment reactor vessel subjected to accidental internal pressure. A multi-layered shell element with a pressure node is adopted for analysis by utilizing a path-dependent crack model, and an orthogonal two-way fixed crack model along with an averaged in-plane 2D RC model and a prestressing tendon model for the layered shell elements. A reinforced concrete panel subjected to biaxial tension, and RCCV and PCCV subjected to internal pressure are also analyzed. Both applicability and validity of the proposed method are shown by comparing the results of volume control method with both experimental results and existing analysis results.     

Shear Modulus Decomposition Algorithm in Magnetic Resonance Elastography

Magnetic resonance elastography (MRE) is an imaging modality capable of visualizing the elastic properties of an object using magnetic resonance imaging (MRI) measurements of transverse acoustic strain waves induced in the object by a harmonically oscillating mechanical vibration. Various algorithms have been designed to determine the mechanical properties of the object under the assumptions of linear elasticity, isotropic and local homogeneity. One of the challenging problems in MRE is to reduce the noise effects and to maintain contrast in the reconstructed shear modulus images. In this paper, we propose a new algorithm designed to reduce the degree of noise amplification in the reconstructed shear modulus images without the assumption of local homogeneity. Investigating the relation between the measured displacement data and the stress wave vector, the proposed algorithm uses an iterative reconstruction formula based on a decomposition of the stress wave vector. Numerical simulation experiments and real experiments with agarose gel phantoms and human liver data demonstrate that the proposed algorithm is more robust to noise compared to standard inversion algorithms and stably determines the shear modulus.     

Pt/AlPO4 nanocomposite thin-film electrodes for ethanol electrooxidation

The enhanced catalytic properties toward ethanol electrooxidation on Pt/AlPO₄ nanocomposite thin-film electrodes were investigated. The Pt/AlPO₄ nanocomposites with various Al/Pt ratios (0.27, 0.57, and 0.96) were fabricated by a co-sputtering method. All of the Pt/AlPO₄ nanocomposites showed a negative shift in the onset potential and a higher current density than those of pure Pt electrode for the electrooxidation of ethanol. Among the various Pt/AlPO₄ nanocomposite thin-film electrodes, the electrode with an atomic ratio of Al to Pt of 0.57 showed the highest electrocatalytic activity for ethanol electrooxidation. The activation enthalpy for the optimum Pt/AlPO₄ nanocomposite was approximately 0.05 eV lower than that of pure Pt. It is believed that the enhancement in catalytic activity is due to the electron-rich Pt resulting from the Fermi-energy difference between Pt and AlPO₄.