Seamless handover supported by parallel polling and dynamic multicast group in connected WLAN micro-cells system

WLAN (Wireless Local Area Network) has been seen to be one of the promising access technologies that adapts to 4G cellular network systems in providing very high speed connection with QoS guarantee through the polling function. However, when the handover happens, the contention-based medium access mechanism which is mainly used in WLAN is invoked and introduces unbounded transmission delay due to idle time periods and retransmission because of collision during the handover. If this technique is expanded to use in a microcellular network such as connected WLAN micro-cells, contention-based mechanism, therefore, should not be used to handle the MT’s handover, especially for vehicular users who change access point every few seconds. To overcome these difficulties in handover, we introduce parallel polling scheme in dynamic LMC (Logical Macro Cell) which can reduce delays much and remove packet loss rate. LMC is a virtual single macro cell which is built on a multicast group of adjacent micro-cells. In the same LMC, polling signals are sent from every BS (base station) to give MT (mobile terminal) permission to access one of these BSs. Instead of wasting much time to contend for resources of a new BS during handover, the MT answers the polling as an acknowledgment to connect to that new BS. The polling response is controlled to multicast to all BSs of the same LMC via the core network to synchronize for the next polling cycle. LMC is controlled to dynamically change when the MT comes in a new BS to make polling signals be continuous in a new LMC. Through analytical and simulation results, we show that the parallel polling scheme can achieve no handover latency, no packet loss and maintain mobile users’ throughput stably in the high traffic load condition though it causes overhead on the neighboring cells in both of wired and wireless sections. At speeds of up to70 m/s, the MT can still maintain its stable connection. OMNeT++ simulator with INET project is used to evaluate our proposal.     

Cryptanalysis of a New Ultralightweight RFID Authentication Protocol—SASI

Since RFID tags are ubiquitous and at times even oblivious to the human user, all modern RFID protocols are designed to resist tracking so that the location privacy of the human RFID user is not violated. Another design criterion for RFIDs is the low computational effort required for tags, in view that most tags are passive devices that derive power from an RFID reader's signals. Along this vein, a class of ultralightweight RFID authentication protocols has been designed, which uses only the most basic bitwise and arithmetic operations like exclusive-OR, OR, addition, rotation, and so forth. In this paper, we analyze the security of the SASI protocol, a recently proposed ultralightweight RFID protocol with better claimed security than earlier protocols. We show that SASI does not achieve resistance to tracking, which is one of its design objectives.     

Optimal bilinear observers for bilinear state-space models by interaction matrices

This paper formulates optimal bilinear observers for bilinear state-space models. Observers in bilinear form, as opposed to other nonlinear forms, are required to develop an extension of observer/Kalman filter identification for simultaneous identification of a bilinear state-space model and an associated bilinear observer from noisy input–output measurements. The paper establishes the relationship between the bilinear observer gains and the interaction matrices which are used to convert the original bilinear state-space model to a form that simplifies the identification of such a model. Techniques to find the interaction matrices are developed. In the absence of noises, these matrices produce the gains of the fastest converging observer. In the presence of noises, they minimise the state estimation error in the same manner as a standard steady-state Kalman filter. Numerical examples illustrate both the theoretical and computational aspects of the proposed algorithms.     

A smartphone attachment for remote ophthalmic slit lamp examinations

Microsystem Technologies - A low-cost, self-imaging smartphone attachment has been developed for remote slit lamp examination of the human eye. The device is designed with off-the-shelf optical...     

Cryptography during the French and American Wars in Vietnam

After Vietnam’s Declaration of Independence on 2 September 1945, the country had to suffer through two long, brutal wars, first against the French and then against the Americans, before finally becoming a unified country free of colonial domination in 1975. The authors’ purpose is to examine the role of cryptography in those two wars. Despite the far greater technological resources of their opponents, the communications intelligence specialists of the Vi?t Minh, the National Liberation Front, and the Democratic Republic of Vietnam had considerable success in both protecting Vietnamese communications and acquiring tactical and strategic secrets from the enemy. Perhaps surprisingly, in both wars there was a balance between the sides. Generally speaking, cryptographic knowledge and protocol design were at a high level at the central commands, but deployment for tactical communications in the field was difficult, and there were many failures on all sides.     

Evaluation of multiple features for violent scenes detection

Multimedia Tools and Applications - Violent scenes detection (VSD) is a challenging problem because of the heterogeneous content, large variations in video quality, and complex semantic meanings of...     

ISOLATION OF ASPHALTENES USING A CONTINUOUS PRECIPITATION METHOD

A new continuous method allows the isolation of heptane asphaltenes which are nearly identical to asphaltenes isolated by a well-studied batch method. Samples of one-half liter of atmospheric resid can be treated using one to two liters of n-heptane, while keeping heptane/resid ratios at 40:1. Asphaltenes precipitated by a well established batch method were identical within the errors of elemental and NMR characterization methods. Small amounts of colored, heptane-soluble materials can be extracted from samples prepared by the continuous technique, but this extraction does not change the analyses of the extracted solids.     

Single-frequency 1310-nm AlGaInAs-InP grating-outcoupled surface-emitting lasers

Single-frequency 1310-nm grating-outcoupled surface-emitting (GSE) semiconductor lasers with output slope efficiencies exceeding 0.1 mW/mA into multimode fibers, threshold currents below 22 mA, and >30-dB sidemode suppression ratios are reported. These GSE lasers consist of 500-/spl mu/m-long active ridges that excite one end of surface-emitting second-order outcoupling gratings with 200-/spl mu/m-long first-order distributed Bragg reflector gratings terminating the laser cavities at both ends. The grating outcouplers range from 10 to 50 /spl mu/m in length. These lasers have an open eye pattern for nonreturn-to-zero signals at 2.5 Gb/s into single-mode fibers. The full-width half-maximum far-field beam divergences range from 1.5/spl deg/ /spl times/ 8/spl deg/ to 5/spl deg/ /spl times/ 8/spl deg/.