Long wavelength quantum well lasers: Synopsis of the RACE “AQUA” project: MOVPE/MBE/GSMBE for InGaAsP/InP and InGaAlAs/InP high speed MQW DFB lasers

The technological limits for ultra high speed devices are now rapidly expanding due to the use of quantum well (QW) materials. This new class of materials gives the opportunity of tailoring materials parameters by controlling geometries on an atomic scale. They look very promising as materials for lasers, detectors and transistors suitable even above 10 Gb/s. It will be demonstrated that state of the art MQW structures can be realized in both material systems, InGaAsP/InP and InGaAlAs/InP. Parallel lateral laser structures (e.g. SIBH, BRS and TBH) have been designed to take full benefit of QW technology. Ultimate reduction of parasitics, whilst using potential low cost fabrication technologies is the basis for achieving high bitrate (10 Gb/s) MQW lasers, even with the stronger damping in QW material. Using the DFB-SIBH laser structure 10 Gb/s large signal experiments are successfully performed with bulk, MQW and SLMQW lasers. Extremely low fall times of 44 ps are achieved. Additional MQW based improvements are observed such as: −3 times higher differential gain, increased output power (>110 mW), 2.5 times lower chirp (Δλ_−20dB = 0.40 nm at 10 Gb/s modulation), and 2 dB gain in power budget at 10 Gb/s digital transmission.     

Development of brief scales to monitor clients' constructions of change.

This article describes the development and validation of scales to measure clients' outcome optimism, perceived progress, and self-agency related to change in problems presented in therapy. In Study 1, initial confirmatory and subsequent exploratory factor analyses (N?=?257) identified effort and persistence as an additional unique factor and guided selection of items to measure the 4 constructs. In Study 2, confirmatory factor analysis of the revised scales with a new sample (N?=?93) confirmed the measurement model. Results of convergent and discriminant validity analyses generally were in the predicted directions. The Perceived Progress scale demonstrated criterion validity with changes in dyadic adjustment and family functioning. The Outcome Optimism and Self-Agency scales showed variability in their relationship to the Perceived Progress scale over the first 3 sessions of therapy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The complexity of some reachability problems for a system on a finite group

We consider a system defined as the product of a finite set of periodic systems on cyclic groups. It is of interest to determine if certain subgroups and unions of subgroups of the state set are reachable from a specified initial state, and in particular to determine the computational complexity of verifying such reachability. These questions are motivated by certain problems that arise in the modelling and control of discrete event systems and certain forms of periodic scheduling. Our main result is that deciding whether or not the union of a certain set of subgroups is reachable or not is NP-complete.     

Regeneration studies on nickel molybdate catalysts used for the upgrading of coal-derived liquids

Nickel molybdate catalysts used in several different upgrading reactions of coal-derived materials from low-rank Australian coals have been regenerated and their activity assessed using a number of physical and chemical techniques. Regeneration of spent coked catalysts for 20 hours in air at 450°C was sufficient to restore chemical hydrogenation activity to catalyst used for pre-asphaltene, asphaltene and oil upgrading, provided poisoning of the catalyst surface by other impurities, principally chlorine-containing molecules, had not occurred.     

Experimental study of phase equilibria in the PbO-ZnO-“Fe2O3”-CaO-SiO2 system in air for high lead smelting slags (CaO/SiO2=0.35 and PbO/(CaO + SiO2)=5.0 by weight)

Experimental studies on phase equilibria in the multicomponent system PbO-ZnO-CaO-SiO₂-FeO-Fe₂O₃ in air have been conducted to characterize the phase relations of a complex slag system used in commercial lead oxidation smelting. The liquidus in the pseudo-ternary section ZnO-“Fe₂O₃”-(PbO + CaO + SiO₂) with the CaO/SiO₂ weight ratio of 0.35 and the PbO/(CaO + SiO₂) weight ratio of 5.0 has been constructed using results of over 100 high-temperature equilibration and quenching experiments followed by electron probe X-ray microanalysis. The liquidus in this pseudoternary section contains primary phase fields of spinel (zinc ferrite) Zn _x Fe_3−x O_4+y , zincite Zn _u Fe_1−u O, melilite Pb _v Ca_2−v Zn _w Fe_1−w Si₂O₇, hematite Fe₂O₃, magneto-plumbite PbFe₁₀O₁₆, and dicalcium silicate Ca_2−t Pb _t SiO₄. The laboratory results are compared with the slags obtained from an industrial reactor.     

Decision making,computer attitudes and expert systems: What is our direction?

Expert systems have been concerned with applications dealing with medical diagnosis, mineral exploration, and computer configuration, with some efforts relatively successful in achieving results at least as good as human experts. Today, much is being written about these systems and managerial decision-making activities in organizations and the positive impact that they can have in these situations. However, it appears that expert systems could become somewhat of a panacea for some organizational ailments as research, development, and marketing of them continues at a fast pace. What may be forgotten in this technological thrust is the individual decision maker and his/her unique style of decision making which could affect acceptance and use of these systems. Another important consideration is the attitude people have toward computers and computer systems, which along with decision-making styles could certainly affect expert system effectiveness and ultimate success in organizations. This paper provides a discussion of potential problems that could occur regarding individual decision making and attitudes and their relationships to these systems.     

Implantable biomedical microsystems for neural prostheses.

In the following article, the technologies to fabricate polyimide-based thin and flexible substrates with monolithically integrated electrode arrays and printed circuit boards (PCB) for hybrid electronic assemblies as well as an assembling technique that connects bare electronic dice with flexible PCBs are presented. The concept of modular, flexible biomedical microsystems as neural prostheses is introduced in general and described in detail in three examples. A cuff electrode with integrated multiplexer circuitry and standard implantable cables represents the combination of microtechnology with precision mechanics; a sieve electrode used as an implant in peripheral nerve regeneration studies demonstrates the next level of integration density but still uses a cable connection; and last, joint effort to fabricate the demonstrator of a vision prosthesis that is completely implantable in the eye with a wireless link for energy supply and data transmission is presented. System design, hybrid assembling technology, and flexible multilayer encapsulation using parylene and silicone rubber are the key components for creating a new generation of neural prostheses for complex and challenging new applications.