Probing the structure of mouse Ehrlich ascites cell 5.8S, 18S and 28S ribosomal RNA in situ

The secondary structure of mouse Ehrlich ascites 18S, 5.8S and 28S ribosomal RNA in situ was investigated by chemical modification using dimethyl sulphate and 1-cyclohexyl-3-(morpholinoethyl) carbodiimide metho-p-toluene sulphonate. These reagents specifically modify unpaired bases in the RNA. The reactive bases were localized by primer extension followed by gel electrophoresis. The three rRNA species were equally accessible for modification i.e. approximately 10% of the nucleotides were reactive. The experimental data support the theoretical secondary structure models proposed for 18S and 5.8/28S rRNA as almost all modified bases were located in putative single-strand regions of the rRNAs or in helical regions that could be expected to undergo dynamic breathing. However, deviations from the suggested models were found in both 18S and 28S rRNA. In 18S rRNA some putative helices in the 5'-domain were extensively modified by the single-strand specific reagents as was one of the suggested helices in domain III of 28S rRNA. Of the four eukaryote specific expansion segments present in mouse Ehrlich ascites cell 28S rRNA, segments I and III were only partly available for modification while segments II and IV showed average to high modification.     

全新革命性架构ASMBL平台的FPGA

ASIC的非重复研发成本(NRE)与研发时间正迅速攀升.在0.13微米领域为例,不但非重复研发成本(NRE)甚至高达1000万美元以上,设计一套ASIC芯片通常必须要耗费12至18个月的时间.此外,在开芯片的设计规格时,必须考虑支持不同应用的调整性(Adaptability).调整性的需求来自于许多因素,其中包括:     

Competitive protein adsorption to polymer surfaces from human serum

Surface modification by “soft” plasma polymerisation to obtain a hydrophilic and non-fouling polymer surface has been validated using radioactive labelling. Adsorption to unmodified and modified polymer surfaces, from both single protein and human serum solutions, has been investigated. By using different radioisotopes, albumin and Immunoglobulin G (IgG) adsorption has been monitored simultaneously during competitive adsorption processes, which to our knowledge has not been reported in the literature before. Results show that albumin and IgG adsorption is dependent on adsorption time and on the presence and concentration of other proteins in bulk solutions during adsorption. Generally, lower albumin and IgG adsorption was observed on the modified and more hydrophilic polymer surfaces, but otherwise the modified and unmodified polymer surfaces showed the same adsorption characteristics.     

Ventilation system design for a church pipe organ using numerical simulation and on-site measurement

Since old churches have had heating installed, more complaints have arisen of organs sounding out of tune. Sound frequency of organ pipes is dependent on air temperature. Old churches tend to have very large volumes, so are typically heated just before and during services in wintertime, in order to reduce energy usage. Warm air plumes rise at radiators and spread out into the room, finally reaching the cold organ casing where they cause a non-uniform temperature distribution within. If pipes standing in different temperature zones are played at the same time the organ sounds out of tune due to clearly audible beats (interference between two slightly different frequencies). The purpose of this study was to design a ventilation system inside the organ casing, able to create a uniform temperature distribution around the pipes. A computational fluid dynamic (CFD) model was developed for the St. Martin church in Oberesslingen, Germany. It was validated by on-site measurements that had been carried out in the organ casing of the church. Four organ divisions containing 300–500 pipes were represented by equivalent porous material zones. Their properties were determined using an auxiliary two-dimensional model of a staggered array consisting of 392 pipes. The effect of different ventilation system settings on the temperature field in the organ casing was examined. Best results were achieved by a system consisting of two ventilation lines together with a thin, synthetic net placed at the open interface between church and organ casing in order to reduce warm air inflow.     

Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

Thin hard coatings on components and tools are used increasingly due to the rapid development in deposition techniques, tribological performance and application skills. The residual stresses in a coated surface are crucial for its tribological performance. Compressive residual stresses in PVD deposited TiN and DLC coatings were measured to be in the range of 0.03-4 GPa on steel substrate and 0.1-1.3 GPa on silicon. MoS₂ coatings had tensional stresses in the range of 0.8-1.3 on steel and 0.16 GPa compressive stresses on silicon. The fracture pattern of coatings deposited on steel substrate were analysed both in bend testing and scratch testing. A micro-scale finite element method (FEM) modelling and stress simulation of a 2 μm TiN-coated steel surface was carried out and showed a reduction of the generated tensile buckling stresses in front of the sliding tip when compressive residual stresses of 1 GPa were included in the model. However, this reduction is not similarly observed in the scratch groove behind the tip, possibly due to sliding contact-induced stress relaxation. Scratch and bending tests allowed calculation of the fracture toughness of the three coated surfaces, based on both empirical crack pattern observations and FEM stress calculation, which resulted in highest values for TiN coating followed by MoS₂ and DLC coatings, being K_C = 4-11, about 2, and 1-2 MPa m^1/2, respectively. Higher compressive residual stresses in the coating and higher elastic modulus of the coating correlated to increased fracture toughness of the coated surface.     

Lipase Catalyzed Transesterification of Unsaturated Lipids in a Microemulsion

A series of triglycerides having varying degrees of unsaturation of the acyl groups has been transesterified with stearic acid. It is shown that the position of the double bonds, not the degree of unsaturation, is the decisive factor in the rate of reaction. A A-6 double bond, which is present in petroselinic acid and ylinolenic acid, prevents reaction. Unsymmetrical triglycerides containing only one acyl group with δ-6 unsaturation reacts regiospecifically with the A-6 acyl group facing away from the enzyme. γ-Linolenic acid can be incorporated into an unhindered triglyceride through lipase catalyzed transesterification, indicating that the active site can in fact accommodate a δ-6 fatty acid, although not the corresponding triglyceride.     

HIV and hepatitis B infection and risk behavior in young gay and bisexual men

A random conical tilt reconstruction of negatively stained Saccharomyces cerevisiae fatty acid synthase was used as a model to compute a three-dimensional reconstruction from untilted stain specimens of the molecules in multiple orientations using a three-dimensional projection alignment method. The resulting structure (24 A resolution) has a more uniform resolution than the initial structure and the handedness revealed in the random conical tilt method is preserved. In a similar approach, this model was used to compute a 21-A-resolution frozen-hydrated structure from untilted specimens of the molecules in multiple orientations. Even though the reconstructions are in close agreement, the stain structure appears to enhance the protein density associated with less robust features. These procedures significantly reduce the time and effort required to obtain a three-dimensional reconstruction from frozen-hydrated data with a resolution that is comparable to the best obtained by more laborious methods. The agreement between the stain and frozen-hydrated reconstructions affords convincing evidence concerning the validity of the structure and the information afforded by the two reconstructions significantly enhances the structural analysis of the molecule.     

Coexistence of enkephalin- and tyrosine hydroxylase-like immunoreactivities in nerve fibers of the temporomandibular joint capsule of the guinea pig

This case report describes the intraoperative improvement of somatosensory evoked potentials (SEPs) during the removal of a broached pedicle screw that had been placed in an unmonitored procedure 1 month earlier. Postoperatively, there was improved neurologic function and reversal of the neurologic deficit that had been caused by the first procedure. To our knowledge, this is the first report of a correlation of intraoperative SEP improvement with improved postoperative neurologic function after neurologic deficit because of nerve irritation or compression from a pedicle screw. Nerve damage occurs in about 15% of patients who undergo instrumentation after lumbar fusion. The potential utility of neurophysiologic methods during initial screw placement is suggested and supported, as proper use of such intraoperative tools may have prevented the need for the second procedure.     

Distribution of metal onto the belt of a horizontal strip caster

This paper presents a new method for metal distribution onto the belt of a horizontal single belt strip caster. Water and liquid tin have been used to study the flow conditions in the feeding zone on the conveyor belt. Tests of a method presented in literature for metal distribution have been conducted and a new method that uses multiple parallel jets in order to obtain stable feeding conditions have been tested. This method gives a controlled way of maintaining a continuous liquid film and it also has a stable meniscus. The freezing problem with a triple point will also be eliminated by use of this method.