提高地方院校信管专业学生实践能力的途径研究

为了提高地方院校信管专业的竞争能力,将实践能力和地方性特色培养融入到学校教育中,成为了现在地方院校信息管理与信息系统专业教育的重中之重。论文首先强调了信管专业学生实践能力培养的重要性。然后通过调查比较找出目前各地方院校信管专业实践教育体系存在的不足之处。最后以南通大学为例具体研究提高南通大学信管专业学生实践能力的途径。     

计算机组装课程教学中的多媒体应用探究

因为多媒体技术具有多样的优点,为此,在当前的教学改革在全国范围内如火如荼的进行的时候,将多媒体技术引入到计算机组装课程教学活动中,必然能大大提高课堂教学效率,但是,在课堂上广泛应用多媒体技术的时候,有些问题也要引起足够的重视,避免不利影响的发生。     

基于LabVIEW的航空火警控制盒测试设备

航空火警控制盒测试设备是一套主要用于火警控制盒、火警探测器、主告警控制盒、告警控制盒等的校验、故障诊断的设备。介绍了一种基于LabVIEW的航空火警控制盒测试设备的方法,利用PC机中的LabVIEW图形化编程软件采用随机数读取并且显示,再对信号进行分析,对超限信号起到报警功能。     

Indices of the nutritional status of workers in the oil and gas production industry adapting to the extreme conditions of an arid zone

The authors studied actual nutrition and certain parameters of food (supply of vitamins A, E, C and the content of phospholipids, cholesterol, NEFA, triglycerides and cholesterol esters) for oil derrick installers working during summer at the "Mangyschlakneft" amalgamation. Incorrect structure of their nutrition and insufficient supply with vitamins A and C, revealed as the result of the study, necessitate rationalization of the nutrition for such workers.     

The influence of environmental fluids and temperature on the cut-surface morphology of single-crystal silicon

Single-crystal (Cz) silicon wafers [(100) p-type] were cut in air, d6onked (DI) water and ethanol, at room temperature, 150 and 200°C by a diamond impregnated dicing wheel using a specially designed apparatus. The effects of environmental fluids and temperature on the cut surface morphology were examined by scanning electron microscopy (SEM). The SEM investigation showed that gouging and ploughing is predominant when silicon is cut in DI water or ethanol. Debris size analysis showed that the mean diameter of the volume distribution (MV) of debris formed in ethanol at room temperature was 9.5 m while that formed in air was 1.3 m. The surface morphology is significantly different at 150 and 200° C as compared to room temperature, i.e. the width of individual wear tracks varied from 0,8 m for room temperature to 1.6 m for 200° C.     

Digital parallelism, perpendicularity, and rectangles

The slope of digital line segments is defined and an algorithm to evaluate it is presented. Parallelism and perpendicularity of two digital line segments are also defined. Finally, rectangular digital regions are defined and characterized, and an algorithm that determines whether or not a given digital region is a digital rectangle is presented.     

Corrosion behaviour of Ni-Zr-Ti-Si-Sn amorphous plasma spray coating

Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous material was deposited by a vacuum plasma spraying technique onto steel and copper substrates in order to investigate their behaviour in a corrosive environment. For comparison, the same alloy was prepared as amorphous ribbons by melt spinning. The amorphous nature of the coatings and ribbons was characterized by XRD, DSC and TEM, while XPS and AES analyses were performed to understand the origin of passivation and mode of corrosion. The corrosion behaviour of the coating was studied in H₂SO₄ and HCl solutions open to air at room temperature. Potentiodynamic polarisation and galvanic coupling tests were carried out on the substrate and the coating. It was found that the formation of Zr-, Ti- and Si-rich passive oxide layers provide a high corrosion resistance in H₂SO₄ solution while the breakdown of the passive layer by chloride ion adsorption was responsible for pitting corrosion of the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous ribbons in HCl solution. Galvanic corrosion was the dominant corrosion mechanism for the coating/copper hybrid structure, in contrast to the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous coating, which efficiently protected the steel substrate in the corrosive environment.     

粉末冶金TiAl合金排气门的研制

利用元素粉末冶金方法制备了TiAl合金排气阀。为提高排气门杆部的致密度、均匀度 ,设计了特有的径向热压工艺 ,并从理论上分析了与该工艺相关的压坯密度、致密化和应力变化规律。制备出高径比为 10 .7,密度为 3.79g/cm3 的粉末冶金TiAl合金汽车发动机排气门     

碳含量对缺碳硬质合金组织和性能的影响

通过配制不同碳含量的WC-6Co缺碳硬质合金,采用X射线衍射、光学金相、显微硬度、钴磁和TRS等分析方法,对比研究碳含量对低压烧结缺碳硬质合金的显微组织和性能的影响。结果表明:碳含量影响合金中η相的类型、含量、分布、WC的形状以及合金的性能;Co3W3C相出现在缺碳程度相对较小的合金中,其含量随碳含量的增加而增大,而Co6W6C相与之相反;合金中的η相总量随碳含量的增大而减少;随着缺碳程度的增加,合金中η相的分散均匀性变差,并且η相趋向于成大块状;WC大多呈现多角特征;合金的密度和维氏硬度随着碳含量的增加,先大幅度增加后缓慢减小,碳含量为5.2%(质量分数)时均出现最大值,合金的钴磁和横向断裂强度随着碳含量的增加而增加。     

城市污水处理新型生物脱氮除磷技术研究进展

当下,我国城市污水处理厂的主要矛盾已由有机物的去除转向氮、磷等营养物的去除.而城市污水处理厂目前普遍采用的传统生物脱氮除磷工艺因其自身的特点及城市污水特征,导致氮、磷污染物去除效率无法满足愈发严格的国家标准.针对这种问题,通过对同步硝化反硝化、厌氧氨氧化、反硝化除磷、短程硝化反硝化这些新型技术及其研究现状进行介绍,探究新型生物脱氮除磷技术在城市污水处理领域中应用的优越性与合理性.并基于多菌群协同除污机理,结合我国城市污水处理可持续发展现状,探索未来的技术发展方向.