四川优质苧麻的结构和性能研究

本文采用扫描电镜、Ｘ射线衍射仪以及常规仪器分析的方法测试了四川优质麻－达县红皮小麻和大竹青白麻的形态结构，超分子结构和力学性能，并与棉纤维进行了对比．实验表明，精干麻表面光洁．有裂纹裂缝等结构不匀点，取向度高，结晶度高，断裂强度高，刚性和断裂比功大，而延伸小；纤维粗．在主要指标上，红皮小麻优于青白麻。     

波形刃铣刀片铣削温度试验分析

进行了铣削温度试验 ,采用改进的人工热电偶法 ,利用动态数据采集系统 ,对波形刃铣刀片的铣削温度进行了采集。利用C语言和MATLAB软件对试验数据进行了分析 ,拟合出温度—时间 (T t)曲线 ,初步得到了受热密度函数 ,为温度场的可视化打下有力的基础     

A simplified method for calculating the substation grounding gridresistance

A simple and accurate formula for calculating the grounding grid resistance is proposed in this paper. This method is based on a theoretical manipulation of the numerical moment method and of the current image. The formula is dependent on the substation grounding grid design, such as grid depth, grid size, number of meshes, grid-conductor diameter, etc. A comparison study is performed to check the accuracy of the proposed formula with respect to six different formulas and methods in the literature. An excellent agreement was found between the results of this formula and the results of a sophisticated computerized method     

保证跌落试件姿态的方法

进行包装件的自由跌落试验时,必须保证试件姿态符合标准规定。笔者在实践中总结出一种保证试件姿态和检验试件姿态误差的具体方法。     

Effect of storage temperature on phenolics stability in hawthorn (Crataegus pinnatifida var. major) fruits and a hawthorn drink

The stability of five major phenolics, namely (−)-epicatechin (EC), procyanidin B₂ (PC-B₂), chlorogenic acid (ChA), hyperoside (HP) and isoquercitrin (IQ), in hawthorn fruits and a canned hawthorn drink were evaluated during 6 months of storage in the dark at three different temperatures (4, 23 and 40 °C). HPLC with a diode-array detector was used to determine the contents of the individual compounds. The results showed that the studied phenolics in the hawthorn fruits and the drink were both stable at 4 °C and relatively unstable at 23 and 40 °C with varied extents of degradation. At room temperature (23 °C), marked degradations of EC and PC-B₂ were observed in both the fruits and the drink with around 50% and 30% decrease after a 6-month storage, respectively. A more significant decrease of the phenolics was observed at 40 °C, especially for EC and PC-B₂, which were almost completely degraded after a 6-month storage. HP, IQ and ChA were relatively stable at 23 °C, but unstable at 40 °C. Therefore, low-temperature storage is recommended for maintaining the quality and efficacy of hawthorn fruits and its preparations.     

跨世纪的测井找油找气高技术

人类社会即将跨入21世纪,各行各业都在预测未来技术的发展,测井行业也不例外。预测成象测井技术将是跨世纪的测井找油找气高技术。     

EXPERIMENTAL RESEARCH ON EFFECT OF MAIN-FLOW SWING ON FLOW TURBULENCE STRUCTURE

It is mentioned in this paper that the adjustment of flow structure occurs when themain-flow swings.The changes of turbulence structure and flow energy loss in the indoor rivermodel are measured.The experimental data are presented for the first time for the further studyof complicated river flow structure.     

震源延迟叠加技术及应用效果

延迟叠加爆炸是针对高分辨率和深层地震勘探而提出来的一种激发方式。这种激发方式能在保证地震分辨率的前提下有效提高地震波能量 ,在地震波的入射角范围内 ,有效克服非球形炸药激发引起的地震波传播的方向性。应用弹性波动力学对多级延迟爆炸进行理论研究 ,结合实际试验资料 ,研究了延迟爆炸情况下激发参数对地震波能量、主频、频宽等的影响。从几何地震学出发 ,分析了不同时间激发的地震波在地下空间中的干涉情况 ,对其能量传播的方向性进行了研究。理论分析和试验效果表明 ,延迟叠加震源与相同药量的普通震源相比 ,激发地震波的主频高 ,频带宽 ,增强了下传能量 ,降低了次生干扰 ,在高分辨率和深层地震勘探中具有明显的优势。     

A Customized Radiation Sensor for Ionization Collection

The measurement of absorbed doses is fundamental to radiation biology and oncology. A customized parallel plate radiation sensor was designed and fabricated as a precursor to investigating novel materials, such as carbon nanotubes, as a substitute for conventional metallic conducting plates or active volume medium. This sensor contains two thick and large-area electrodes that provide the sensor with a good signal-to-noise ratio. The 6 MV and 15 MV photon beams produced by a Varian Clinac 21 EX medical linear accelerator were used in the experiments. The linear accelerator was calibrated such that 1 monitor unit (MU) produces 1 cGy of dose in water with depth of 5 cm for a calibration geometry of source-to-axis distance equal to 100 cm and 10times10 cm² field size at the point of measurement. Ionization measurements were performed by varying the bias voltages, electrode separations, exposures, and angles of the incident beam to characterize the sensor. Signal saturation characteristics of the sensor with different electrode separations and exposures were investigated. This sensor displayed excellent linear response to exposure up to 600 MU. An analytical modeling using the pencil beam model and simulations based on device configuration were given to explain the results. In oblique incident beam experiments, the prototype sensor showed an accurate response compared to simulation results for a small field size of 1times1 cm². The sensor was tested to be suitable in the study of ionization collection efficiencies for different materials