Numerical simulation of deflecting flow in a symmetric enlarged channel

Numerical results of three-dimensional separated flow and heat transfer in a rectangular channel with a suddenexpansion are presented in this paper.Numerical simulations of Navier-Stokes and energy equations are carriedout using the finite difference method.The results of three-dimensional calculations are compared with thetwo-dimensional ones,and effects of the aspect ratio of channel upon the flow are shown.The transition fromsymmetric to asymmetric flow appears at lower Reynolds number as increasing the aspect ratio.The details oflocal heat transfer characteristics in two different separated flow regions on two downstream walls are clarified.Two-dimensionality of the flow and heat transfer almost disappears for the aspect ratio considered.     

Preparation and morphology of as-prepared and highly stretch-aligned polyacetylene

The macroscopic morphology of as-prepared polyacetylene depends on the concentration of the catalyst system. At high catalyst concentration, polymerization occurs on the free surface of the catalyst solution to form a polyacetylene film which retards further polymerization because of the limited diffusion of acetylene monomer through the film. At lower concentrations, however, successive diffusion and polymerization is possible yielding a gelatinous mass. A continuous mass does not form at an extremely low concentration; the product is flock or powder. Despite these differences in macroscopic morphology, electron micrographs show that the fibrillar structure is a common feature of all forms of polyacetylene. However, the average fibril diameter of 200 Å may depend on the polymerization conditions. Orientation of the fibrils by combined mechanical and thermal treatment is possible to produce highly stretch-aligned films which show anisotropic properties.     

Spectral interference Mirau microscope with an acousto-optic tunable filter for three-dimensional surface profilometry

A nonmechanical scanning Mirau-type spectral interference microscope has been developed for the measurement of three-dimensional surface profiles of discontinuous objects. An acousto-optic tunable filter (AOTF) is used as a high-resolution spectral filter, which scans the optical frequency of the broadband light emitted from a superluminescent diode. To generate spectral fringes that make full use of the limited coherence length of the filtered light we unbalanced the Mirau interferometric system by positioning the reference mirror nearly halfway between the top and the bottom of the step height. When the frequency of the broadband light source is scanned by an AOTF, the interference fringes move in opposite directions on the top and the bottom of the object. To uniquely determine the sign of the fringe movement over the large area of the object, we developed a three-dimensional Fourier-transform technique, and from the detected sign of the fringe movement and phase information, we determined the three-dimensional step height. Experimental results of the measurement of 100-microm step height are presented. The main advantages of the proposed system are that it provides nonmechanical scanning and a large measurement range without ambiguity in the sign of the phase.     

Poly[(R)-3-hydroxybutyrate] formation in Escherichia coli from glucose through an enoyl-CoA hydratase-mediated pathway

In this study, a new metabolic pathway for the synthesis of poly[(R)-3-hydroxybutyrate] [P(3HB)] was constructed in a recombinant Escherichia coli strain that utilized forward and reverse reactions catalyzed by two substrate-specific enoyl-CoA hydratases, R-hydratase (PhaJ) and S-hydratase (FadB), to epimerize (S)-3HB-CoA to (R)-3HB-CoA via a crotonyl-CoA intermediate. The R-hydratase gene (phaJ(Ac)) from Aeromonas caviae was coexpressed with the PHA synthase gene (phaC(Re)) and 3-ketothiolase gene (phaA(Re)) from Ralstonia eutropha in fadR mutant E. coli strains (CAG18497 and LS5218), which had constitutive levels of the beta-oxidation multienzyme FadB(Ec). When grown on glucose as the sole carbon source, the cells accumulated P(3HB) up to an amount 6.5 wt% of the dry cell weight, whereas the control cells without phaJ(Ac) or fadR mutation accumulated significantly smaller amounts of P(3HB). These results suggest that PhaJ(Ac) and FadB(Ec) played an important role in supplying monomers for P(3HB) synthesis in the pathway. Furthermore, by using this pathway, a P(3HB)-concentration-dependent fluorescent staining screening technique was developed to rapidly identify cells that possess active R-hydratase.     

Structural Distortion and Compositional Gradients Adjacent to Epitaxial LiMn2O4 Thin Film Interfaces

Thin film electrode materials are key components in the development of high rate, high capacity solid‐state Li‐ion batteries. Detailed knowledge of the epitaxial film/substrate(current‐collector) interface structures, which provides insights into epitaxial growth mechanisms and the effects of microstructure on electrochemical properties, is essential for efficient materials and device design. Here we report the epitaxial growth mechanism of a typical cathodic LiMn₂O₄ thin film by exploring the detailed structural and compositional variations in the vicinity of a film/substrate interface using state‐of‐the‐art scanning transmission electron microscopy. Direct observation of atom columns shows the epitaxial film forms an atomically flat and coherent heterointerface with the substrate, but that the crystal lattice is tetragonally distorted with a measurable compositional gradient from the interface to the crystal bulk. The growth mechanism is interpreted in terms of a combination of chemical and physicomechanical effects, namely a complex interplay between the internal Jahn‐Teller distortions induced by oxygen non‐stoichiometry and the lattice misfit strain.     

Epoxy curing reaction studied by using two‐dimensional correlation infrared and near‐infrared spectroscopy

The isothermal curing process of bisphenol A epoxy resin with polyamine reagent (1,6‐diaminohexane) was monitored in situ by using temperature‐controlled Fourier‐transform infrared (FTIR) and Fourier‐transform near infrared (FTNIR) spectroscopy to elucidate the relative changes in functional groups during the curing reaction. It was shown that generalized two‐dimensional correlation spectroscopy can provide new information about the mechanisms and kinetics of the curing process, and the band assignments for complex NIR spectrum associated with this system. The sequential order of relative changes in functional groups during the curing process was examined by generalized 2D correlation spectroscopy and NIR‐IR hetero‐correlation spectroscopy, and the details of the complex epoxy curing reaction involving both primary and secondary amino group were revealed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011