Tablet Coating in an Aqueous System

We have studied about the operation technique of film coating with HPMC, Pharmacoat which is our product name, and show here some data in commercial scale using mainly aqueous system which is expected to be carried out in the near future throughout the world.     

Technology for the control of quality in automated manufacturing

This paper reviews the present status of technology for the quality assurance of products produced by flexible automation parts-manufacturing. Two examples of practical systems that represent typical products (rotational and prismatic work-pieces) are described with particular emphasis on control functions relevant to product quality     

A simple method for measuring wire tension in drift tubes

Measuring the tension of wires in drift tubes after construction is an important procedure because sometimes the wires get loose after soldering. The method described here uses a simple circuit for observing the change in the Lissajous pattern of a wire resonating with an external magnetic field. The vibration of the wire causes a fundamental harmonic component in the current and results in a periodic change of the Lissajous pattern. Measurement of this fundamental harmonic signal provides a precise determination of the resonance frequency and the wire tension.     

Oxygen consumption of single bovine embryos probed by scanning electrochemical microscopy

Oxygen consumption of individual bovine embryos was noninvasively quantified by scanning electrochemical microscopy (SECM). A probe microelectrode was used to scan near a single embryo surface in a culture medium to monitor the oxygen reduction current at 37 degrees C, under a water-saturated atmosphere of 5% CO2 and 95% air. The oxygen concentration profiles near the embryos were in good agreement with the theoretical spherical diffusion. When an embryo reached the stage of a morula with a 74-microm radius on day 6 after in vitro fertilization, the oxygen concentration difference (deltaC) between the bulk solution and the morula surface was 6.90 +/- 1.35 microM. The oxygen consumption rate (F) of the single morula was estimated to be (1.40 +/- 0.27) x 10(-14) mol s(-1). After the SECM measurement, the embryo was continuously cultured for another 2 days and grew to the stage of a blastocyst with a 100-microm radius. For the blastocyst, the deltaC values for the inner cell mass side and the trophoblast side were 16.40 +/- 1.83 and 9.14 +/- 1.68 microM, respectively. The oxygen consumption rate of the blastocyst was found to be in the range of (2.50 +/- 0.46) x 10(-14) mol s(-1) < F < (4.49 +/- 0.50) x 10(-14) mol s(-1). We have carried out SECM measurements for 19 embryos, and the results were compared in detail with these from an optical microscopic observation. The deltaC values for the morulae on day 6 after in vitro fertilization were strongly related to the morphological embryo quality. The morulae showing a larger deltaC value developed into blastocysts of a larger size, and the deltaC value after the subsequent 2 days of cultivation was found to be increased.     

Screening of high melting point phase change materials (PCM) in solar thermal concentrating technology based on CLFR

We have investigated the suitability of high melting point phase change materials for use in new, large scale solar thermal electricity plants. Candidate materials for latent heat thermal energy storage are identified and their operating parameters modeled and analysed. The mathematical characteristics of charging and discharging these storage materials are discussed. Several high melting point, high conductivity materials are shown to be suitable and advantageous for use with solar thermal electricity plants, such as Sydney University’s novel, low cost CLFR and MTSA collector systems, as well as existing parabolic trough and tower technologies.