Fabrication of cellulose nanofiber‐based ultrafiltration membranes by spray coating approach

Ultrafiltration membranes containing a cellulose nanofiber barrier layer were fabricated by the spray coating method, where the thickness and uniformity of the barrier layer were systematically investigated as a function of air pressure, flow rate and concentration of the cellulose nanofiber suspension. In specific, the surface morphology of the barrier layer was studied by scanning electron microscopy and its uniformity was examined by the fluorescence dye imaging method. The ultrafiltration performance of the membranes fabricated by the spray coating method was also compared with that of the membranes made by the knife coating approach using dextran molecules as probe, where the former consistently exhibited significantly higher permeation flux while remaining the same rejection ratio. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44583.     

Synthesis and properties of organosoluble polyimides based on 1,1-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]cyclohexane

New aromatic diamine with cyclohexane cardo group substituted with trifluoromethyl group in the side chain, 1,1-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]cyclohexane (II), was prepared through the nucleophilic substitution reaction of 1,1-bis(4-hydroxyphenyl)cyclohexane and 2-chloro-5-nitrobenzotrifluoride in the presence of potassium carbonate, to yield the intermediate dinitro compound I, followed by catalytic reduction with hydrazine and Pd/C to afford the diamine II. Fluorinated polyimides (IVa-g) were prepared from the II with various aromatic dianhydrides via thermal or chemical imidization of poly(amic acid). These polyimides had inherent viscosity ranging from 0.72 to 1.16 dl/g and showed excellent solubility in a variety of organic solvents. They were soluble in a concentration of 10% in the amide polar solvent, and 1-5% in the other testing solvents. IV films showed good mechanical properties, excellent thermal stability. The 10% weight loss temperature was above 476 °C in nitrogen or air, and the glass transition temperature was recorded at 214-278 °C. In comparison of the IV series with the analogous nonfluorinated polyimides (V series) based on 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (II′), IV series revealed better solubility, lighter-colored and lower dielectric constants and moisture absorptions. Their films had cut-off wavelengths in the range of 364-414 nm, b^* value (a yellowness index) ranging from 3.3 to 66.3, dielectric constants of 3.02-3.55 (1 MHz), with moisture absorption of 0.16-0.36 wt%.     

Experimental and CFD study on the mass flow-rate characteristic of gas through orifice-type restrictor in aerostatic bearings

This paper describes the experimental and CFD study on the mass flow-rate characteristic through an orifice-type restrictor in aerostatic bearings. In the conventional design of gas-lubricated aerostatic bearings, the mass flow-rate of gas through an orifice-type restrictor is generally derived from a well-known mathematical model, which is originally developed to describe the mass flow-rate property through an ideal nozzle. It is reasonable to doubt if there is any difference between the property of mass flow-rate through an orifice and that through a nozzle. In this paper, therefore, a series of simulations and experiments are carried out and the results show that the mass flow-rate characteristic through an orifice is different from that through a nozzle. Consequently, the conventional model to determine the mass flow-rate through an orifice-type restrictor in aerostatic bearings may have to be updated to the proposed new model for more precise design and modelling of the gas-lubricated aerostatic bearings.     

Pathogenesis and Treatment of Myeloma-Related Bone Disease

Multiple myeloma is a hematologic malignancy of plasma cells that causes bone-destructive lesions and associated skeletal-related events (SREs). The pathogenesis of myeloma-related bone disease (MBD) is the imbalance of the bone-remodeling process, which results from osteoclast activation, osteoblast suppression, and the immunosuppressed bone marrow microenvironment. Many important signaling cascades, including the RANKL/RANK/OPG axis, Notch signaling, the Wnt/β-Catenin signaling pathways, and signaling molecules, such as DKK-1, sclerostin, osteopontin, activin A, chemokines, and interleukins are involved and play critical roles in MBD. Currently, bisphosphonate and denosumab are the gold standard for MBD prevention and treatment. As the molecular mechanisms of MBD become increasingly well understood, novel agents are being thoroughly explored in both preclinical and clinical settings. Herein, we will provide an updated overview of the pathogenesis of MBD, summarize the clinical management and guidelines, and discuss novel bone-modifying therapies for further management of MBD.     

Experimental simulation on the integration of solid oxide fuel cell and micro-turbine generation system

Solid oxide fuel cell (SOFC) is characterized in high performance and high temperature exhaust, and it has potential to reach 70% efficiency if combined with gas turbine engine (GT). Because the SOFC is in developing stage, it is too expensive to obtain. This paper proposes a feasibility study by using a burner (Comb A) to simulate the high temperature exhaust gas of SOFC. The second burner (Comb B) is connected downstream of Comb A, and preheated hydrogen is injected to simulate the condition of sequential burner (SeqB). A turbocharger and a water injection system are also integrated in order to simulate the situation of a real SOFC/GT hybrid system. The water injection system is used to simulate the water mist addition at external reformer.     

Hydrogen production in steam reforming of glycerol by conventional and membrane reactors

The aim of this study is to produce hydrogen through the glycerol steam reforming process. The reaction is carried out in a traditional reactor and an electrolessly plated Pd/Ag alloy membrane reactor, with varying reaction temperature, weight hourly specific velocity (WHSV) and water glycerol molar ratio (WGMR). The non-catalytic test was also employed for comparative purposes. The results show that the reaction is highly depending on temperature, and the maximum glycerol conversion achieved to 96.24% at 800 °C with a hydrogen yield of 5.82 mol-H₂/mol-C₃H₈O₃. It also found that the Pd/Ag membrane can effectively separate hydrogen from the reaction side and subsequently enhance the reaction rate in the membrane reactor. TGA measurements were employed to quantify the amounts of deposited carbon and the results also confirmed that the CeO₂ modified catalyst can improve the carbon resistance as well as activity and stability.     

Preparation and properties of carbon nanotube/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cells

This study aims at the fabrication of lightweight and high performance nanocomposite bipolar plates for the application in polymer electrode membrane fuel cells (PEMFCs). The thin nanocomposite bipolar plates (the thickness <1.2 mm) consisting of multiwalled carbon nanotubes (MWCNTs), graphite powder and PP were fabricated by means of compression molding. Three types of polypropylene (PP) with different crystallinities including high crystallinity PP (HC-PP), medium crystallinity PP (MC-PP), low crystallinity PP (LC-PP) were prepared to investigate the influence of crystallinity on the dispersion of MWCNTs in PP matrix. The optimum composition of original composite bipolar plates was determined at 80 wt.% graphite content and 20 wt.% PP content based on the measurements of electrical and mechanical properties with various graphite contents. Results also indicate that MWCNTs was dispersed better in LC-PP than other PP owing to enough dispersed regions in nanocomposite bipolar plates. This good MWCNT dispersion of LC-PP would cause better bulk electrical conductivity, mechanical properties and thermal stability of MWCNTs/PP nanocomposite bipolar plates. In the MWCNTs/LC-PP system, the bulk electrical conductivities with various MWCNT contents all exceed 100 S cm⁻¹. The flexural strength of the MWCNTs/LC-PP nanocomposite bipolar plate with 8 phr of MWCNTs was approximately 37% higher than that of the original nanocomposite bipolar plate and the unnotched Izod impact strength of MWCNTs/LC-PP nanocomposite bipolar plates was also increased from 68.32 J m⁻¹ (0 phr) to 81.40 J m⁻¹ (8 phr), increasing 19%. In addition, the coefficient of thermal expansion of MWCNTs/LC-PP nanocomposite bipolar plate was decreased from 32.91 μm m⁻¹ °C⁻¹ (0 phr) to 25.79 μm m⁻¹ °C⁻¹ (8 phr) with the increasing of MWCNT content. The polarization curve of MWCNTs/LC-PP nanocomposite bipolar plate compared with graphite bipolar plate was also evaluated. These results confirm that the addition of MWCNTs in LC-PP leads to a significant improvement on the cell performance of the nanocomposite bipolar plate.     

What drives smartwatch purchase intention? Perspectives from hardware,software, design,and value

Although wearable devices are popular in recent years, the market share of smartwatches is relatively low. The main goal of this research is to investigate the antecedents of the intention to purchase a smartwatch. This research develops a conceptual model and hypotheses based on the theory of reasoned action and perceived values from the perspectives of software, hardware, and aesthetic design. An online questionnaire was developed and distributed on popular websites to collect data, and 260 usable responses are collected from the potential users of the Apple Watch in Taiwan. The thirteen hypotheses were validated by using partial least squares (PLS) techniques. Among the antecedents of purchase intention in the model, the attitude towards using smartwatches was found to have the strongest direct effect. Among the factors of the attitude, design aesthetics have the most significant effect. The results also show that all of the factors about smartwatch attributes directly affected the related perceived values. However, social value and performance/quality value did not affect the intention. The model demonstrated relatively good explanatory power for purchase intention in the context of smartwatches. The proposed model can provide insights to smartwatch vendors to develop their new products and marketing strategies.     

Creation of arbitrary spectra with an acousto-optic modulator and an injection-locked diode laser

We use a double-passed acousto-optic modulator (AOM), driven by an arbitrary waveform generator to produce multiple frequency components for a laser with arbitrary frequency spacings. A programmed sequence containing various sections of radio-frequency sinusoidal signal at different frequency is applied to drive the AOM. The diffracted light is used to injection-lock a diode laser. The combined techniques allow us to generate the multi-line spectra for the diode laser with arbitrary frequency spacings in the range of 100 MHz at a relatively high output power of 80 mW and a small power variation of 2%. Such a light source can be used in the application for laser cooling of molecules.