Comparative study of maleated polyolefins as compatibilizers for polyethylene/wood flour composites

The effects of various types of compatibilizers on the mechanical properties of high‐density polyethylene/wood flour composites were investigated. Functionalized polyolefins, including maleated polyethylenes, polypropylene, and styrene–ethylene/butylene–styrene copolymer, were incorporated to reduce the interfacial tension between the polyethylene matrix and wood filler. Of these, maleated linear low‐density and high‐density polyethylenes gave higher tensile and impact strengths for the composites, presumably because of their better compatibility with the high‐density polyethylene matrix. Similar but less enhanced improvements in the mechanical properties, depending on the compatibilizer loading, were seen for a maleated styrene–ethylene/butylene–styrene triblock copolymer, whereas maleated polypropylene only slightly improved the tensile modulus and tensile strength, which increased with increasing compatibilizer loadings. Scanning electron microscopy was used to reveal the interfacial region and confirm these findings. Dynamic mechanical thermal measurements showed the interaction between the filler and the matrix. Fourier transform infrared spectroscopy was used to assign the chemical fixation and the various chemical species involved on the surfaces of the fillers before and after surface treatment. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 487–496, 2003     

Acceleration or retardation to crystallization if liquid-liquid phase separation occurs: Studies on a polyolefin blend by SAXS/WAXD, DSC and TEM

Blends of statistical copolymers containing ethylene/hexene (PEH) and ethylene/butene (PEB) exhibited the behavior of upper critical solution temperature (UCST). The interplay between the early and intermediate stage liquid-liquid phase separation (LLPS) and crystallization of the PEH/PEB 50/50 blend was studied by time-resolved simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) techniques. Samples were treated by two different quench procedures: in single quench, the sample was directly quenched from 160 °C to isothermal crystallization temperature of 114 °C; while in double quench, the sample was firstly quenched to 130 °C for 20 min annealing, where LLPS occurred, and then to 114 °C. It was found that in the early stage of crystallization, the integrated values of Iq² and crystallinity, X_c, in the double quench procedure were consistently higher than those in the single quench procedure, which could be attributed to accelerated nucleation induced by enhanced concentration fluctuations and interfacial tension. In the late stage of crystallization, some morphological parameters were found to crossover and then reverse, which could be explained by retardation of lamellar growth due to phase separation formed during the double quench procedure. This phenomenon was also confirmed by DSC measurements in blends of different compositions at varying isothermal crystallization temperatures. The crystal lamellar thickness determined by SAXS showed a good agreement with TEM observation. Results indicated that the early stage LLPS in the PEH/PEB blend prior to crystallization indeed dictated the resulting lamellar structures, including the average size of lamellar stack and the stack distribution. There seemed to be little variation of lamellar thickness and long period between the two quenching procedures (i.e., single quench versus double quench).     

Toughening of epoxy thermosets with nano-sized or micron-sized domains of poly(ethylene oxide)-b-poly(butadiene-co-acrylonitrile)-b-poly(ethylene oxide) triblock copolymers synthesized using room temperature ester coupling reaction

Poly(ethylene oxide)-b-poly(butadiene-co-acrylonitrile)-b-poly(ethylene oxide) (PEO-b-PBN-b–PEO) triblock copolymers with three different compositions were synthesized from poly(ethylene glycol) methyl ethers and carboxylic acid-terminated poly(butadiene-co-acrylonitrile) (CTBN) by ester coupling reaction at room temperature. The PEO-b-PBN-b-PEO was incorporated into anhydride cured epoxy thermosets to improve the fracture toughness by the formation of either nano-sized spherical micelles or micron-sized vesicles. The polymer chemical structure was confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance, and gel permeation chromatography. The morphology of PEO-b-PBN-b–PEO within the epoxy thermosets was investigated using a transmission electron microscope, an atomic force microscope, and a scanning electron microscope. Also, we conducted impact testing and plane-strain fracture toughness testing to evaluate the fracture toughness in terms of the impact strength and the critical stress intensity factors (K_IC) for the modified epoxy thermosets. The results revealed that all the PEO-b-PBN-b-PEO triblock copolymers are more effective in the toughening of epoxy thermoset compare to CTBN. We found that the 5 wt% PEO-b-PBN-b-PEO modified epoxy thermoset containing micron-sized vesicles exhibited the highest K_IC, which was 3.23 times as high as the K_IC of pristine epoxy thermoset. Besides, the glass transition temperature remained and the tensile modulus did not reduce remarkably when the amount of PEO-b-PBN-b-PEO added into epoxy was 5 wt%.     

An intelligent skin‐color capture method based on fuzzy C‐means with applications

Consumer behavior is complicated. In the cosmetic market, personal intuition and fashion trends for color selection are guidelines for consumers. A systematic method for female facial skin‐color classification and an application in the makeup market are proposed in this study. In this article, face recognition with a large number of images is first discussed. Then, an innovative method to capture color at selected points is presented and complexion‐aggregated analysis is performed. This innovative method is an extension of face‐recognition theory. Images in RGB format are converted to CIELAB format during data collection and then Fuzzy C‐means theory is used to cluster and group the data. The results are classified and grouped in Lab value and RGB index. Two programs are created. The first program, “FaceRGB,” captures color automatically from images. The second program, “ColorFCM,” clusters and groups the skin‐color information. The results can be used to assist an expert system in the selection of customized colors during makeup and new‐product development.     

Compatibilization of Poly(ethylene terephthalate)/Polypropylene Blends with Maleic Anhydride Grafted Polyethylene-Octene Elastomer

Blends of poly(ethylene terephthalate) (PET) and polypropylene (PP) at composition 80/20 with and without a compatibilizing agent were studied. Both materials are widely used in the soft drink bottle industry. The compatibilizing agent was a maleic anhydride grafted polyethylene-octene elastomer (POE-g-MA). The olefinic segment of POE is compatible with PP, whereas the maleic anhydride is affined with PET carbonyl groups. The effectiveness of the compatibilizing agent was evaluated using different techniques, such as Fourier transform IR spectroscopy, mechanical analysis, scanning electron microscopy, dynamic mechanical analysis, and rheological analysis. The results show that the addition of POE-g-MA promotes a fine dispersed-phase morphology, and improves process ability and toughness of these blends. Shifts in the glass-transition temperature of the PET phase and the increase in the melt viscosity of the compatibilized blends indicated enhanced interactions between the discrete PET and PP phases induced by the functional compatibilizer.     

Effect of air blowing on the morphology and nanofiber properties of blowing‐assisted electrospun polycarbonates

Polycarbonate (PC) nanofibers are prepared using the air blowing‐assisted electrospinning process. The effects of air blowing pressure and PC solution concentration on the physical properties of fibers and the filtration performance of the nanofiber web are investigated. The air blowing‐assisted electrospinning process produces fewer beads and smaller nanofiber diameters compared with those obtained without air blowing. Uniform PC nanofibers with an average fiber diameter of about 0.170 μm are obtained using an applied voltage of 40 kV, an air blowing pressure of 0.3 MPa, a PC solution concentration of 16%, and a tip‐to‐collection‐screen distance (TCD) of 25 cm. The filtration efficiency improvement of the air blowing‐assisted electrospun web can be attributed to the narrow distribution of fiber diameter and small mean flow pore size of the electrospun web. Performance results show that the air blowing‐assisted electrospinning process can be applied to produce PC nanofiber mats with high‐quality filtration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Carrier dynamics and intervalley scattering in InN

The carrier cooling and the carrier relaxation of an InN thin film illuminated with two excitation energies of 1.53 and 3.06 eV were studied by an ultrafast time-resolved photoluminescence upconversion apparatus. The hot phonon effect could be accounted for longer effective phonon emission times as compared to the theoretical prediction. The rise time and the LO phonon emission time for 3.06 eV excitation were much smaller than those for 1.53 eV excitation. These differences were attributed to the intervalley scattering between the Γ₁ and Γ₃ valleys in InN when carriers were excited with the energy of 3.06 eV. The intervalley scattering times of 250 fs and 2 ps were estimated for the intervalley scattering from the Γ₁ to Γ₃ valley and the reversed scattering process, respectively.     

Formation mechanism of microcrystalline spherical graphite particles in solidified nickel

Nickel is a well known catalyst that can readily transform carbon into graphite at high temperature. In our designed arc-discharge experiments, diamond easily dissolved in melted nickel and became small graphitic flakes. After the melted nickel had cooled and solidified, there were many microcrystalline-sized spherical graphite particles found on the nickel grain boundaries, surprisingly. It is interesting that only at the hotter area would the spherical graphite be found. This leads to our proposed forming mechanism: the spherical graphite particles were formed during the solidification of nickel. Because the temperature and solubility are high at the hotter area (zone A), the crystallization and growth of graphite became transport-controlled, instead of surface-controlled, and therefore the most common shape of the particles was spherical. This phenomenon, as far as we know, has not been previously observed.     

Using structural equation model to explore occupational lead exposure pathways

The aim of the present study was to demonstrate the use of a structural equation model to explore the complicated lead exposure pathways in a lead battery plant. A total of 96 out of 113 assembly workers were recruited in this study. Lead measurements included blood lead, respirable airborne lead, and body surface lead loadings. Latent variables of inadvertent contact of lead on fingers and ingested lead had indirect and direct effects on the blood lead levels, respectively, and so did the variables of respirable airborne lead, smoking, and the working-place clothes being washed. A model chi(22)2 value of 31.1 (P=0.094) for a goodness of fit test indicates that the derived structural equation model appropriately accounted for the variation of blood lead levels. It is concluded that lead loadings on fingers and lips had significant effects on occupational lead uptake, and, after-work hours and break times at work were the critical time periods for inadvertent lead exposure.     

Survival of bifidobacteria after spray-drying

To investigate the survival of bifidobacteria after spray-drying, Bifidobacterium infantis CCRC 14633, B. infantis CCRC 14661, B. longum ATCC 15708, B. longum CCRC 14634 and B. longum B6 were first spray-dried with different carrier media including 10% (w/w) gelatin, gum arabic and soluble starch. B. infantis CCRC 14633 and B. longum were also determined in skim milk. It was found that survival of bifidobacteria after spray-drying varied with strains and is highly dependent on the carriers used. Among the test organisms, B. longum B6 exhibited the least sensitivity to spray-drying and showed the highest survival of ca. 82.6% after drying with skim milk. Comparisons of the effect of carrier concentrations revealed that spray-drying at 10% (w/w) gelatin, gum arabic or soluble starch resulted in the highest survival of bifidobacteria. In addition, among the various outlet-air temperatures tested, bifidobacteria showed the highest survival after drying at 50 degrees C. Elevation of outlet-air temperature caused increased inactivation of bifidobacteria. However, the inactivation caused by increased outlet-air temperature varied with the carrier used, with the greatest reduction observed using soluble starch and the least with skim milk.