二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

高性能2.5Gb／s用的DFB—LD／EA单片集成器件

报导了采用全ＭＯＣＶＤ生长的１．５５μｍ的单片集成ＤＦＢ＝ＬＤ／ＥＡ组件的 在ＤＷＤＭ系统上的传输测试结果，出纤功率Ｐｆ≥２．５ｍＷ＠Ｉｆ＝７５ｍＡ，边模抑制比ＳＭＳＲ〉３５ｄＢ，调制器反向偏压为２．５Ｖ时的消光比为１４ｄＢ，该发射模块在２．５Ｇｂ／ｓＤＷＤＭ系统上进行了传输试验，传输２４０Ｋｍ后无误码，其通道代价≤１ｄＢ＠ＢＥＲ＝１０＾－１２。     

防止减速器“跑,冒,漏”油的几种新方法

介绍了防止减速器“跑，冒，漏”油的几种新方法。     

铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

Solving the gate packing problem using a concurrent network

The layout problem of gate matrices and one-dimensional logic arrays is composed of two major tasks: to find a permutation of gates which minimises the number of tracks required and to layout/pack gates based on the ordering. A parallel algorithm is presented which can pack n gates within O(1) time, whereas the conventional near-optimum algorithm needs O(n/sup 2/) time. The simulation results show that the increase of the problem size does not degrade the solution quality.<>     

Adaptive control of arterial blood pressure with a learningcontroller based on multilayer neural networks

The authors discuss a two-model multilayer neural network controller for adaptive control of mean arterial blood pressure (MABP) using sodium nitroprusside. A model with an autoregressive moving average (ARMA), representing the dynamics of the system, and a modified backpropagation training algorithm are used to design the control system to meet specified objectives of design (settling time and undershoot/overshoot) and clinical constraints. The controller is associated with a weighting-determinant unit (WDU) to determine and update the output weighting factor of the parallel two-model neural network for adequate control action and a control-signal modification unit (CMU) to comply with clinical constraints and to suppress the effect of adverse noise and to improve the WDU performance. Extensive computer simulations indicate satisfactory performance and robustness of the proposed controller in the presence of much noise, over the full range of plant parameters, uncertainties, and large variations of parameters     

薄膜磁头磁轭制备工艺研究

本文重点讨论了用不同的工艺方法来制备薄膜磁头中的关键元件-磁轭。采用多次光刻的方法克服湿法工艺中磁性膜NiFe层的侧向钻蚀问题，从而实现对磁轭几何尺寸的精确控制，并对几种工艺方法的优缺点作了比较详细的分析。     

乙烯基三甲基硅烷等离子体聚合反应历程

应用色谱—质谱(GC-MS)及裂解色谱-质谱(PGC-MS)测定了乙烯基三甲基硅烷等离子体聚合反应中的气体冷凝物及聚合物,研究推导了等离子体聚合反应历程。单体在气相中被电子撞击,然后扩散到基底,在基底发生链增长和链终止反应。     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255