Air bearing design, optimization, stability analysis andverification for sub-25 nm flying

Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in ² areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions     

中国增值电信业务的发展与思考

增值电信业务是指利用公共网络基础设施提供附加的电信与信息服务业务,其实现的价值使原有基础网路的经济效益或功能价值增高.从业务分类上,它对应于基础电信业务.增值电信业务的主要特征是面向社会提供信息服务.……     

ICP-AES法测定金属镝中钽

利用钽不溶于酸的性质与稀土分离，用焦硫酸钾熔融，酒石酸浸取，制得被测溶液，采用ICP-AES测定其中钽量，结果令人满意。     

硅粉/酚醛制备低成本碳化硅陶瓷复合材料

以低成本的硅粉和酚醛为原料 ,采用浆料浸渍 热压成型 反应烧结法制备了Cf SiC单向板 ,并对工艺条件进行了探讨。制备得到的单向板的弯曲强度达到 45 6 .8MPa ,断裂韧性达到 7.94MPa·m1 2 。     

透射型定时探测器

本文介绍了由微道板构成的透射型定时探测器,得到的飞行时间系统的时间分辨为280ps。并对进一步改善时间特性作了讨论。     

浅谈“水源空调“在丹东市的推广使用

本文通过对“水源空调”的介绍,结合丹东市的地质情况,分析论证其在我市推广使用的可行性。     

X射线三轴晶衍射法测量半绝缘GaAs单晶的化学配比

采用X射线三轴晶衍射法,根据As间隙原子对作为过量As在GaAs单晶材料中存在的主要形式的模型,可以无损、高精度测量半绝缘GaAs单晶的化学配比.并探讨了引起晶格变化的原因及其与熔体组分的关系,对于制备高质量GaAs单晶及其光电器件具有重要的意义.     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

单晶钛酸铋纳米片的XPS和Raman特性

以Bi（NO3）3·5H2O和Ti（OC4H9）4为原料，NaOH为矿化剂，采用水热法制备了形貌规则的单晶Bi4Ti3O12纳米片。X射线衍射（XRD）结果表明，所合成的产物为正交相层状钙钛矿结构的Bi4Ti3O12。场发射扫描电子显微镜（FESEM）研究显示：样品是由大量边缘尺寸接近200nm，厚度约为15nm的片状结构组成。利用X射线光电子能谱（XPS）研究产物的化学组分和价态分布。室温拉曼光谱研究表明，Bi4Ti3O12纳米片的声子寿命和热稳定性低于相应的块体材料。